Mid-Sized floor standing ex demo from U.S. ex distributor in graphite and borollo red. Due to blemishes at the bottom of the cabinets (not visible when speakers are standing), we are listing them at 8/10 condition. Comes with 1 year limited warranty for parts and labor.
Unusual in a world constrained by the vagaries and pressure of a fashion conscious market, the Vivid Audio B-1 represents an almost perfect test piece for the technology involved. The pure pistonic drivers pioneered by Lawrence Dickie in his original Nautilus have been honed to a fine focus in this loudspeaker system.
The B-1 is a floor standing model which incorporates four drivers in a 3 & 1/2 way system. B-1 employs a single D50 mid range (patent pending) driver between 900Hz and 4 kHz with the range beyond being handled by a D26 tweeter (patent pending). Below 900Hz the B-1 uses two C125 mid-bass drivers (patent pending), one mounted on the front baffle and one on the rear baffle of the cabinet. These two drivers are internally coupled via a screw tensioning unit for reaction cancelling. Both drivers receive the same signal at frequencies below 100Hz while above this point the drive to the rear is progressively attenuated leaving only the front driver to operate all the way to 900Hz in order to keep the distance between drivers at a minimum around crossover. Fourth order filters ensure phase coherence through both main crossover points resulting in a seamless and symmetrical polar performance.
Integral to the B-1 enclosure is the stand. Made from the same carbon fibre loaded polyester compound as the enclosure, this considerable yet graceful design provides an exceptionally stable footing while not detracting from the acoustic environment surrounding the loudspeaker, thanks to the small frontal area of each arm. To further guarantee the stability of the complete system, a total of five custom spikes are mounted around the periphery of the base. Adjustment of the front and rear spikes sets the attitude while the remaining two can then be brought into contact with the floor for maximum stability.
Within each of the streamlined arms are hidden separate conduits to guide the Van den Hul® interconnecting cable away from the two internally mounted crossovers into the base. Precision machined WBT® gold plated terminals are discretely located at the rear of the base to allow a visually unobtrusive connection to the outside world.
The rear of the cabinet, is as exquisitely finished as the front. They come with grills which may be fitted to stop the inquisitive from poking the drivers, not shown.
PayPal or C.C. + 3.5%.
CA residents will need to pay sales
Speakers ship 7 to 10 days after payment.
Please do not hesitate to contact On A Higher Note with any
questions or high resolution images