Bob Carver Corp350 watt mono tube ampusedCarver Corp 350 mono tube amp 350 watt tube mono ampsSOLD Ask about 6 MONTHS NO INTEREST thru PayPal I have a pair of trade-in black Carver 350 mono amps for sale. The price is for the pair. They have been tested and sound great. These amps are...4880.00

Carver Corp 350 mono tube amp 350 watt tube mono amps

Listing ID: lis9bafc Classified 
 Listed  · 239 Views

underwoodwally 

member since July 2000

Underwood Hifi Inc.  Verified Dealer

Last 12 months
All-time13914100.0%

19 Watchers

Time Left: None

This listing has ended.

Condition
7/10
Payment methods

Contact seller after sale to pay viaVISA/Mastercard, American Express, Discover, Certified check or Wire Transfer

Ships fromBluff City, TN, 37618
Ships toUnited States
Package dimensions20.0" × 18.0" × 12.0" (53.0 lbs.)
Shipping carrierFedEx
Shipping cost$140.00
Original accessoriesBox
AverageResearch Pricing

SOLD

     Ask about 6 MONTHS NO INTEREST thru PayPal

I have a pair of trade-in black Carver 350 mono amps for sale. The price is for the pair. They have been tested and sound great. These amps are amazing values and can drive any speakers. They also run far cooler than any other tubes amps so the output tubes had a 10 year warranty when new from the factory. They are sonically adjustable and you can make them warmer of more detailed to match your system.
  • 350 watts into 8 ohms

  • Under 1-ohm capability

  • Tubes

    • 12AX7 x 1

    • 12AT7 x 1

    • 6AL5 x 1 (part of DC Restorer circuit)

    • Tung-Sol KT120 x 6

  • Output Transformer

    • Proprietary design with hand-wound, interleaved windings of copper and silver on a steel core; low leakage inductance, super wide band

  • Controls

    • Volume Control

    • 2-position Feedback Switch- Contemporary or Classical

  • Four-function meter

    • Bias setting (in conjunction with rear panel control)

    • Tube Tester (tests at actual voltage and current conditions)

    • Tube Matcher (cool, but not really necessary)

    • VU Meter

  • Rear Panel

    • Power Switch

    • IEC AC Input Socket

    • Line Fuse

    • Tube Fuse

    • Recessed Tube Bias Control

    • 5-way binding post outputs

    • Common, 2, 4, and 8-ohm speaker load

    • XLR Input and gold-plated RCA Input

  • Crimson or ebony hand-rubbed piano lacquer finish

  • Convection cooling

    From the website:

    Rated Power:  350 watts/8 ohms nominal loudspeaker load, 400 watts/4 ohms nominal loudspeaker load, 400 watts/2 ohms nominal loudspeaker load
    Frequency Response: 2 Hz to 85 kHz (–3 dB)
    Distortion: Less than 0.5%
    Power Bandwidth: 24 Hz to 28 kHz without filters
    Line Inputs: 2; XLR and RCA
    Input Impedance: 100 K ohms (RCA)
    Gain: 30 dB (8 ohms)
    Tube Complement:
    One 12AX7, one 12AT7,
    one 6AL5, six KT120,
    (KT150 not recommended)

    Hum and Noise:  Better than 120 dB, referred to 350 watts, A-weighted
    Bias: Rear panel potentiometer adjust, front panel meter
    Feedback Control: 20 dB, Classic; 11 dB, Contemporary
    Output Transformer:
    Interleaved windings, super wideband, low leakage inductance, proprietary design
    Source Impedance: 1.7 ohms
    Speaker Outputs:  2, 4, and 8 ohms
    Color: Satin Black
    Dimensions (H x W x D):
    7.2” X 12” x 14”  x 2

    Weight: 44lbs (19.95 kg) per chassis x 2


    From the Carver site:

Following on the heels of his highly reviewed previous 305 amplifier, Bob has created the Crimson 350 and Raven 350 (Black version). Never one to rest on his laurels, Bob has yet again created a design that sets a new benchmark, defining what a high power vacuum tube amplifier should be, at a price well below market value. These amps are exceptional value at only $9500.00 a pair and quite competitive with any of the competition at $20-$25k.
Bob increased the energy storage three-fold, compared to the previous 305. Utilizing Tung-Sol KT-120 output tubes, the Crimson 350 will bring new life to your music library with its extended dynamic range and abundant output power. (KT150’s are no longer available from Carver as Bob clearly preferred the 120’s) These KT-120s are rated for 75 watts of audio output each, and this amp has six of them for an easy 350 watts RMS. These tubes are one and a half times as powerful as the ubiquitous 6550 or KT88. According to Bob, they “sound beautiful, sweet, and so incredibly delicate, that once again, it is difficult to believe. But it’s true. Honest! I love their unique shape. The only thing I don’t like about them is that it’s difficult to see the filaments glow in the dark. The plate structure gets in the way.”

Using his own transformer design, the Crimson 350 delivers 350 watts into 8 ohms (400 watts into 4 or 2 ohms) of pure sonic ecstasy, regardless of the loudspeaker’s impedance vs. frequency. The new, heavier output transformer delivers enormous power through an increased turns ratio, with two extra interleaved windings, each bifilar wound on a core of Adamantine steel and now with an upgraded pure nickel center section. The secondary’s are wound with oxygen-free copper wire and 98% pure silver wire for the critical internal interconnections. As Bob says, “I could go on and on, but I will say that the bandwidth of this output transformer is an amazing two hundred and fifty kilohertz - that’s a quarter of a megahertz!” This extra wide bandwidth ensures perfect stability into one ohm speakers, including those that possess almost impossible-to-drive impedance characteristics! Even the one ohm Apogee Scintillas, or any other speaker that dips down to 0.75 ohms, for that matter. Martin Logan electrostatics, for example, whose impedance drops down even lower than that at very high frequencies (to about 0.5 ohms). This amplifier can drive them all with aplomb!

The Crimson 350’s bias is easily and simply adjusted using a single control, making it unnecessary to adjust the bias individually for each output tube set. The DC restorer circuit, an exclusive to Bob Carver designs, keeps the output tubes running cool, prolonging their life to beyond 50 years! Prior to the advent of this feature in Bob’s amplifiers, other amplifiers operated their vacuum tubes at a very high idle power in order to keep the distortion low, frequency response extended, as well as for a host of other reasons, related to amplifier performance. And they still do. The downside of doing so is that the tube life is drastically shortened, about three to six years at the most. Worse yet, tube performance begins to deteriorate as soon as the amp is turned on, gradually (and insidiously) robbing the listener of sonic pleasure. In addition to extended tube life, thanks to this invention, there is also no need to purchase expensive matched tubes for the Crimson 350.

The screen voltage is regulated on speech and music to a difficult and almost impossible to believe 1%, and the bias regulator has been redesigned to almost perfectly restore the DC component of the incoming audio signal. Nothing else can even come close to this performance.

Another significant feature of Bob’s design is its ability to “listen to the room,” sometimes referred to as the ‘speaker-microphone effect.’ Facilitated by a special current feedback loop, it allows the amplifier to ‘hear’ the room’s reverb, along with its unique sonic signature. Each room plays its own tune, and this amp uses the speaker as a microphone by using the speaker in reverse (the theorem of reciprocity) to ‘listen to the room,’ thereby allowing a portion of the room acoustic to be expressed through the main speakers. Think of it this way, the room becomes an integral part of the music in a way no other amplifier allows. The sound is more majestic, more realistic, and the soundstage is larger and more compelling than it would be without this unique, spooky and strange ability. To be sure, all tube amps do this in small, almost minuscule amounts (Harry Pearson noted this long ago), but this amplifier does it to a great extent and in a rather complex manner by very intentional and special design. This phenomenon is impossible to achieve with normal solid-state amplifier designs, whose low source (output) impedance effectively shorts out the speaker’s ability to accomplish this feat.

Finally, Bob has also added a set of XLR inputs as well as the RCA ins from the previous products.

The Crimson 350 brings added clarity, life, and presence to any existing system and loudspeakers.

Read our AudiogoN #1 rated over 13,800 points of feedback and buy with confidence.

Call us at 770-667-5633 with questions or to get this pair.
We accept Visa, AMEX, MasterCard, Discover and PayPal as well as money orders.
No credit card or PayPal fees.
GA and HI customers add sales tax.


Brands carried: Audio GD electronics, Audio GE speakers, Bluesound music streamers & servers, Core Power Technologies A/V power conditioners and cables, Denon, DSPeaker room correction, ELAC speakers, Emerald Physics loudspeakers & amps, Focal headphones, HifiMan headphones, Iso-Acoustics, LSA speakers headphones, turntables & electronics, Marantz Reference, Martin Logan speakers & subwoofers, Melco servers, MOFI turntables, Musical Fidelity, Music Hall, Ortofon cartridges, Peachtree Audio, Project turntables, Quad speakers & electronics, Raal headphones, Sendy headphones, Silverline Audio, SPL electronics, Sumiko cartridges, Sweet Vinyl pop & click filters, Wharfedale speakers, Wireworld cables, Zesto Audio tube electronics

Sales policies on the Underwood Hifi Inc. website at www.underwoodhifi.com

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.