Introducing a cable completely different than anything I have come across previous--Welded terminations providing reduced signal resistance and improved durability. Heavy gauge nickel plated OFC for superior high current conductivity and Mu Metal, aluminum and nickel copper mesh, double shielding to block all RF noise. My system achieved a level of clarity and cohesiveness unveiling nuances of familiar recordings never heard before.
ZL5000 Speaker Cable is the second biggest selling item next to ZL5000 Power Cord. Experience dictates the source cable being the single most important cable in the signal chain. ZL5000 consistently demonstrates the exception to this rule.
Unlike many brands, custom lengths are offered at a nominal up charge. Standard Length is 3 meters which is sufficient for must applications. Additional Meter Length Available at $300/0.5 Meter. Biwire is an additional $400.
They are being offered with free shipping and 28 day no hassle return policy, meaning on delivery you have 4 weeks to burn in and enjoy the cable. I only ask to return them in a like new condition so they can be re-sold.
Trade in considered. Bulk discount offered. Please contact me directly.
Feel free to call or email me with questions.
We ship world-wide.
503 292 5592
Insulation: Silicon, PVC
Outer jacket: Crystal-clear PVC, Pure copper
Length: 2.5m (standard), 3m
Splitter: Silver duralumin with 4 silicon rings
Terminations: Patented high-tension, Rothium-coated titanium spade terminations
No more loosened binding posts
With our patented double-bladed speaker terminations, there is no need to go behind your loud speakers every month to re-tighten binding posts. Our unique double-bladed spade terminations minimize contact resistance and will not loosen, even when subjected to severe speaker vibration: no need to re-tighten binding posts for years.
Barrier free conductors
Traditional soldered or clamped connections between terminations and conductor create two resistant barriers (solder has much greater resistance than copper or silver). Our direct, high temperature melt welding (1000 Degrees Centigrade), without solder, removes two obstacles in the signal path by melting terminations and wire conductors into a single, seamless material.
Mu-metal shielding for true protection from EMI
While all other audio cable manufacturers use copper and/or silver shields for signal cables, Allnic uses ‘Mu-metal’ as braided shield for its interconnect and digital cables (RCA & XLR) – a world-premiere in the audio industry.
Traditional copper and/or silver mesh shields provide effective protection against electrically generated noise, but they are ineffective against magnetically induced noise. This is because magnetically generated interference freely penetrates both copper and silver. Only Mu-metal (a nickel alloy material) can protect the audio signal from both electronically and magnetically induced noise. Test data show that Mu-metal shielding reduces electromagnetic noise to less than 1/30th of what braided copper shield allows, down -30dB in comparison.
Permanent contact pressure via heat-treated beryllium-copper terminations
Contact resistance is a critical factor for signal transmission. Higher contact pressure and a larger contact surface mean less contact resistance and better signal transfer. Traditional bronze, pure copper and phosphorous-copper terminations cannot provide sufficiently secure and long-lasting contact pressure. Our precision-milled, slit, heat-treated beryllium-copper terminations provide maximum contact surface and powerful contact pressure for minimal signal loss – for life.
Mid-Range Control Technology – MRCT®
Allnic considers an exaggerated midrange to be a clear indicator of inaccurate signal transfer through a cable, and the most formidable distortion to overcome in cable design. Allnic’s MRCT is the result of meticulous listening and measurements to select carefully formulated metal plating for slight midrange “braking” and heavier wire gauges for accurate low frequencies, as well as to ensure control of capacitance for provision of stunningly realistic high frequencies.
Please Note: ZL3000, with same design but smaller gauge wire is offered at: $2500 USD/3.0 Meter Length, $200 USD/1.0 Additional Meter length.
"Kang Su Park has elevated the Allnic brand on the depth and breadth of his electronic line, which continues to evolve at a pace that makes me wonder if he is actually two or three people. His enterprising nature is all the more on display in his cables, which are no cookie-cutter designs using off-the-shelf wire and connectors covered in an obscuring mesh wrap. They are from-the-ground-up designs for which Mr. Park has left no aspect unaddressed. The professed philosophy behind them -- eliminating signal loss -- is on display in their sound, or lack thereof, while the use of mu-metal for shielding and hot-melt welding for connections is unique in the cable market. Given all of this, the prices Mr. Park is charging seem out of line with not only the market in general but his manufacturing care and costs. This is my way of saying that these cables seem positively cheap, given what they offer.
In general, the Allnic interconnects and speaker cables sound more like the electronics and speakers with which they are used than some innate character of their own. And if you think about it, that's really what you want from cables: to get out of the way, to neither add to nor subtract from the music. Throughout my time with them, and the many system iterations with which they were used, they always imparted an authentic sense of the music, as though the system was in a purer, more direct state.
Even so, I couldn't remove one nagging desire as I listened: to hear the Allnic interconnects, speaker cables and power cords connecting some of Mr. Park's latest and greatest electronics. To go all Allnic, all the way, in other words." Marc Mickelson.
Please note: We do have demo cable to audition and demo cable to sell which will be current design unless otherwise noted.