Denon AVR-987 7.1 Receiver

Denon AVR-987 7.1 Receiver

Used in a home theater. Never push to its limits. Includes power cable, remote control, and original manual.

Specs from Denon:

Premium 7.1 A/V Surround Receiver with Dolby Digital Surround EX and DTS ES

Highlights

• Fully Discrete, Equal Power Seven Amplifier Channels
• Digital interface receiver supporting 24-bit/192 kHz signals
• HDMI digital video interface supporting high-quality video of 1080P
• Video Up/Down conversion capable of output to HDMI
• ASD-1R iPod Control Dock (option): Supports iPod playback when connected to the AVR-987
• XM Satellite Radio Ready with optional 'Connect and Play' antenna

Key Features
Audio Section
Fully Discrete, Equal Power Seven Amplifier Channels, 110 Watts Each
Front (A,B):110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05% THD) Center 110 W (8
ohms, 20Hz - 20kHz, 0.05% THD Surround 110 W + 110 W (8 ohms, 20Hz -
20kHz, 0.05% THD) Surround Back 110 W + 110 W (8 ohms, 20Hz - 20kHz,
0.05% THD)

The AVR-987 features an equal power 7-channel
amplifier section, with identical amplifier design and high current
discrete output devices on all 7 channels. Each of the 7 amplifier
channels is rated at 110 watts, into 8 ohms, from 20 Hz - 20 kHz with no
more than 0.05% THD.

Digital interface receiver supporting 24-bit/192 kHz signals
Supports most advanced surround playback formats
Dolby Digital EX/ Dolby Digital/ Dolby Pro Logic IIx/ DTS-ES/ DTS 96/24/ DTS Neo:6/ DTS
Configurable surround back amplifiers Multi-zone system:
A5.1 channel theater in the main room and a stereo environment in a second room.

Video Section
HDMI digital video interface supporting high-quality video of 1080P (*1)
The AVR-987 has HDMI digital video interface terminals (2 inputs and 1
output) that can be switched for high resolution 1080p video signal
transmission. These HDMI terminals also support digital input of multi
channel audio signals.
*1) Version 1.1 compliant. Since HCDP is also supported, video cannot be viewed on a non-HDCP display connected to the ACR-987; please connect a HDCP-compliant display when viewing video material.
Video Up/Down conversion capable of output to HDMI
The AVR-987 includes a video up/down conversion function that allows the
unit to be connected to the monitor via a single cable regardless of the
video input signal's format as follows:
1) Composite video signals are converted to HDMI (*2) component video, & S-video;
2) S-video signals are converted to HDMI (*2) component video, & composite video;
3) Component video signals are converted to HDMI (*2), composite video (*3), & S-video(*3).
*2. I/P conversion from480i/576i to 480p/576p
*3. Down-conversion from component video to composite or S-video applies only to 480i input signals.
3 Sets of Component Video Inputs
High Definition Quality Video Switching
Connectivity/Expand-ability
ASD-1R iPod Control Dock (option): Supports iPod playback when connected to the AVR-987
iPod
(*4) playback can be enjoyed through the AVR-987 when the
ASD-1R,Denon's original iPod Control Dock (sold separately), is
connected to the dedicated control terminal of the AVR-987. The iPod can
also be controlled via the remote controller supplied with the
AVR-987.
*4) Supports 3rd- generation and later iPods equipped with a
Dock connector, some functions may not work depending on the generation
of the iPod and the version of the software.
XM Satellite Radio Ready with optional 'Connect and Play' antenna*
*Subscription to XM services also required.

8 ch Analog EXT IN terminal

Other Features:

• RS-232C Control Port to support AMX, Crestron or 3rd party integrated control systems
• Audio Level Memory, for correcting different signal levels from each input device
• Volume Level Limiter, for limiting the maximum volume value
• On-screen Display
• Setup Lock, for locking the system setup.
• Pre-programmed learning remote controller with GLO-key
• Detachable AC Power Cord
• Frequency Synthesis Tuning 56-Station AM/FM Random Preset Memory Tuning Auto Preset Memory
• Custom Rack Mount Kit Included

Input/Output Terminals For Every A/V System
Audio Inputs
11 Sets Analog Inputs - PHONO, CD, (TUNER), DVD, VDP, TV, DBS, VCR-1, VCR-2, CDR/TAPE, V.AUX (FRONT)
1 Set 8-ch Analog EXT. Input - FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER
7 Sets Digital Input - OPTICAL x 5 (Including FRONT x 1) (Assignable) COAXIAL x 2 (Assignable)
Audio Outputs
1 Set 8-ch Analog PRE Output - FRONT L/R, CENTER, SURROUND, L/R, SURROUND BACK L/R, SUBWOOFER
3 Sets Analog REC Output - VCR-1, VCR-2, CDR/TAPE
1 Set Analog Multi Zone LINE Output - ZONE2 L/R
2 Digital Outputs - Optical x 2
Video Inputs
3 Sets Component Video Input - VIDEO-1, VIDEO-2, VIDEO-3
7 Sets S-Video Input - DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX (FRONT)
7 Sets Composite Input - DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX (FRONT)
Video Output
2 Sets Component Video Output - MONITOR 1, MONITOR 2
4 Sets S-Video Output - VCR-1, VCR-2, ZONE-2, MONITOR
3 Sets Composite Output - VCR-1, VCR-2, ZONE-2, MONITOR
Specifications
Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front - 110 W + 110W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Center - 110 W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround - 110 W + 110W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround Back - 110 W + 110W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Preamplifier Section
Analog
Input sensitivity/impedance 200mV/47kohms
Frequency response 10Hz-100kHz(+0,-3dB direct mode)
S/N 102dB(direct mode) Rated output 1.2V
Digital
D/A output 2.0V
Phono
Input sensitivity/impedance 2.5mV
RIAA deviation +/-1dBb (20Hz to 20kHz)
Rated output 150mV
Video Section
Frequency response
Composite video/S-video 5Hz-10MHz (+0,-3dB)
Component video 5HZ-100MHz (+0,-3dB)
FM Section
Tuning frequency range 87.5 - 107.9 MHz
Usable sensitivity 1.0 V (11.2 dBf)
AM Section
Tuning frequency range 520 - 1710 kHz
Usable sensitivity 18 V
General
Power supply AC120V, 60Hz
Power consumption 6.0A (1W max at standby mode)
Dimensions 434 (W) x 171 (H) x 429 (D) mm [17.1'' (W) x 6.7'' (H) x 16.9'' (D)]
Weight 14.0kg (30lbs 14oz)