Hanss Acoustics T-10: Show Demo-Does Not Include Tonearm, Oyaide BR-12 Mat, Rega Arm-Mount, Dustcover
Listed · 633 Views
3 Watchers
Items from this seller
This listing has ended.
Listings Similar to Hanss Acoustics
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | Gunnison, UT, 84634 |
Ships to | United States and Canada |
Package dimensions | 20.0" × 16.0" × 15.0" (23.0 lbs.) |
Shipping carriers | UPS or FedEx |
Shipping cost | Specified after purchase |
Original accessories | Box, Manual |
Average | Research Pricing |
Kaplan Design - Authorized Dealer for Hanss Acoustics, since 2012.
Hanss Acoustics T-10 Belt Drive Turntable - Does not include Tonearm, Discontinued Model. Show Demo Less than 25Hrs of useYou can use any Rega or Rega OEM Tonearm, with the newer 3 position Mounting System or Threaded Shaft/Base Diameter of 22mm!
Hanss Armboard Base Hole diameter 23.81mm, 15/16", 0.9375" it will accommodate ANY Tonearm with a Base (Shaft) Diameter of 22mm!
Factory Double - Boxed with Excellent Quality Flexible Styrofoam Packing Material.Includes Oyaide BR-12 (MSRP- $90.) Tungsten blended butyl rubber turntable mat BR-12 is a vibration-damping butyl rubber sheet that takes its tapered shape and tuning hole layout after MJ-12, Oyaide's aluminum turntable sheet. With high-friction butyl rubber it has great grip and great contact to vinyl disc to avoid slip even when its used with high pressure stylus. From centre to perimeter, it has a taper of 1.0 degree elevated angle. It will correct a vinyl disc's warpage by the rubber sheet tightly sticking to it. Then stylus movement will get stable to trace the groove. The tapered sheet has 18 tuning holes, it contributes more to improve sound quality. The holes work also as finger rest when removing 10inch or EP discs. Its diameter has been made 294mm to make it easy to remove LP disc(300mm). Thickness is 5mm
No Returns ALL Sales are Final
Actual Pictures of the Table!
Rate 6/10:
(2) scratches on the Plinth, (2) small Dents, Slight Discoloration of Finish on Motor Mount and Magnet attached Underside of CNC Aluminum Sub Platter (not seen when it's mounted on the table), Dustcover has (4) Tiny Scratches 3/8" long x 1/32" Thick a few inches from the Top Left Corner!
Used Walnut T-10, This is very good performing Table! High-Quality European BRASS Bearing and Ceramic Shaft! Same as Tables that are manufactured in Europe that sell for $2000-$10,000. Although this table is selling for $595, its performance is Far Superior to Budgetary low-end tables selling from $250. to $1500. Most low price tables use low-cost, Low-Quality Bearings, Plastic Sub Platters with very thin 1/16 thick Steel Platters! Motor Manufactured in Czech Republic.
Magnetic Suspension, Sub Platter and Platter float above the plinth (Adjustable height of stainless steel Ball) see Pictures - Low Friction Precision Brass Shaft
CNC Aluminum Sub Platter - Ceramic Shaft attached to Magnetic Disc attached to the bottom of the Aluminum Sub Platter.
Acrylic 1 1/16" thick Platter- Fits on top of Aluminum Sub Platter
Bearing attached to the plinth and stainless Steel ball's Height is adjustable underneath the table! (See Pictures) Ceramic Shaft is attached to the underside of the Sub Platter. Brass Bearings and Ceramic shaft are identical to ALL Hanss Acoustics turntables.
Same EXACT BEARING and Ceramic Shaft's installed on EVERY Hanss Acoustics Tables MSRP T-20 $4300, T-30 $6395, T-60 $8700.
Armboard:
Rega 3 hole position arm board mounted to the plinth (see pictures). Inside Diameter 15/16.
Will accommodate - Tonearm with 20mm (14/16") Shaft O.D. (Outside Diameter) {Measured Rega 303 O.D shaft with Caliper}
Same EXACT BEARING'S and Ceramic Shaft's installed on EVERY Hanss Acoustics Tables MSRP T-20 $4300, T-30 $6395, T-60 $8700.
PayPal Fees:
US 3.5%; Canada 4.1%
Shipping:
US - FedEx or UPS
Canada - UPS Standard
Power Supply:
Input - 120 Volt 60Hz | Output - 12VAC 600 mA
Description:
Type: Rigid Turntable, Belt Drive with Suspension Feet!
Feet: (3) Adjustable heavy Feet - See Picture!
Platter: 1 1/16" Precise CNC Acrylic Platter
Sub Platter and Bearing: 7/8" Thick Precise CNC Aluminum - European Ceramic Shaft bottom of sub platter!
Bearing: Magnetic Suspension Low Friction Precision Brass Shaft with Stainless Steel Ball
Plinth: MDF * Wood Veneer Base
Dust Cover: Clear Acrylic
Dimensions: 16 7/8" W x 12.5" D x 1.5" high
Power Supply: AC/DC Adaptor 110Volt 60Hz, 12Volt 500mA
Power Consumption: 3 Watts
Weight: 18.7Lbs
Shipped Weight: 21lbs
Color : Walnut Wood Venner (Not Vinyl)
Motor : Synchronized European AC Motor, Belt Driven
Speed : 33.3rpm/45rpm Manual Speed Selector
Switch: On/Off Switch - Underneath Plinth_ Front Left Side
Pulley: Aluminum
Please Note:
Plating Quality may vary on the surface on the Magnetic Plates. one Magnetic Plate is attached to the bottom of the Sub Platter with the Ceramic Shaft see Pictures. There's a Magnet ring that surrounds the Gray Steel material where the Brass Shaft is installed inside the top of the Plinth.
Authorized Dealer for:
Acoustic Revive
Arcolink
Cayin
Final Audio
Hanss Acoustics
Lumin
Musical Surroundings
Origin Live
Quicksilver Audio
Oyaide
PranaWire
Symposium Acoustics
Starke Sound
Yarlung Records
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.