VAC Master Preamp w/ Phonostage
Listed · 868 Views
This listing has ended.
Listings Similar to VAC
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Boise, ID, 83713 |
Ships to | United States |
Package dimensions | 34.0" × 27.0" × 16.0" (112.0 lbs.) |
Shipping carrier | FedEx |
Shipping cost | Log in to see price |
Original accessories | Remote Control, Box, Manual |
Average | Research Pricing |
Time to replace some of our demo gear. This preamp is exceptionally good. It will hold its own against preamps costing twice times the its cost.
Trades considered. Please call or write for more information.
208-860-9559 Steve
Look at all the premium features included.
Master Preamplifier Technical Specifications
Gain
12 dB
Inputs
3 sets RCA line input
2 sets balanced/RCA selectable inputs
1 set balanced/RCA cinema bypass input
Optional 1 MM and 1 MC (or additional line input if phono is not fitted)
Outputs
2 sets RCA
2 sets balanced XLR (EIA “pin 2 hot” studio standard)
Tubes
2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes)
Absolute Phase
correct from all inputs to all outputs
Frequency Response
Flat over audio band
–3 dB bandwidth 5 Hz – 210 kHz
THD
<0.009% @ 1 kHz, 1 V RMS
Maximum Output
< 8 V RMS
Output Impedance
> 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback)
Maximum Input
Infinite signal (attenuation precedes the gain circuitry)
Recommended Output Load
> 300 ohms
Power
External power supply, detachable umbilical cable, detachable IEC power cord
Unity gain from selector, non-inverting for archival integrity
Cinema Bypass
Yes
Voltage
May be factory configured for operation at 100, 120, 220, or 230/240 volts
Remote Control
included
Illumination
Illuminated logo may be switched off
Finish
Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard.
Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost.
Warranty
Two years parts and labor, excluding tubes (USA, see manual for full details)
Dimensions (H x W x D)
Audio chassis (not including knobs and connectors): 5.5" x 18" x 14.5" (14 cm x 45.7 cm x 36.8 cm)
Power supply (not including connectors): 4.3" x 18" x 14.5" (10.9 cm x 45.7 cm x 36.8 cm)
Shipping Weight
With phono: 75 lbs. (27.7 kg.)
Optional Phono Stage Technical Specifications
Tubes
6x 12AX7
Gain
44 dB MM
64 dB MC
Frequency Response
RIAA standard +/- 0.2 dB (20 Hz - 20 kHz)
-3 dB bandwidth 10 Hz - • 80 kHz
Channel Separation
> 80 dB @ 1 kHz
Maximum Input
> 130 mv @ 1 kHz, MM
> 13 mv, MC
MC Load Impedance
selectable, 470, 300, 250, 200, 150, and 100 ohms
MM Load Impedance
selectable, 47k, 30k, 25k, 15k, and 10k ohms
Overload
117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz
Residual Noise
Less than 3MV at output (s/n ratio greater than approx. 69db)
XACT AUDIO is proud to represent the following high performance gear:
Rockport Technologies speakers
CH Precision and VAC electronics
Nordost cables and noise reduction products
EQUI-TECH balanced power units
Furutech featuring the amazing GTX-D NCR outlet
Lyra and v. d. Hul cartridges
DS Audio optical cartridges and matching phonostages
KLAudio, Audio Desk, and Loricraft record cleaning machines
Stillpoints room treatments, feet and resonance control products
We also manufacture the revolutionary Schröder LT linear tracking tonearm and
THE BEAT MagDrive® turntables.
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.