VH Audio Pulsar Ag - OCC Silver – Digital SPDIF RCA-to-RCA 2M

2 Meter solid-core silver Digital COAX cable terminated with Pasternack PE44622 75 ohm RCA connectors.  These were specifically designed for Mini-59 coax cable, which is almost exactly the size of this VH Audio coax and the strain relief works very well on this cable.  The Pasternack tries to emulate a 75 ohm connection as close as possible by using BNC sized internal pins to make the initial cable connection.

At the core of the Pulsar Ag is VH Audo's UniCrystal™ 24 AWG .999999 purity (99.999% or 5N) SOLID OCC Silver conductor, manufactured using the OCC process (Ohno Continuous Cast). This process results in a conductor without the typical grain boundaries of conventional wire processing methods. Next, VH Audio's prorietary AirLok™ dielectric is applied as the core, in order to achieve the correct, precise impedance of 75 ohms. In fact, this step is performed with such precision that 2-3X the finished length of cable may end up as "scrap" during the production process, as the AirLok™ is "dialed-in" to the correct parameters. The AirLok™ dielectric is VH Audio's proprietary form of foamed/cellular Fluoropolymer that achieves a dielectric coefficient of 1.4. By comparison, the dielectric constant of solid fluoropolymers, such as DuPont™ PTFE, FEP, and, PFA (referred to as Teflon®, when licensed from DuPont) is 2.1. A perfect vacuum is 1.0. A foil shield is applied over the AirLok™ core, followed by a shielding braid of 40 AWG silver-plated OFHC copper. Lastly, a very thin clear FEP jacket is applied.

Outside diameter is only .110", and the cable is quite light and flexible. Capacitance = 16.7 pF per foot.