McIntosh MC-300

McIntosh MC-300, 300W stereo, 600W Mono

• Will accept reasonable offers
• One paint blemish, otherwise looks perfect to me
• All lamps replaced right before listing for sale
• Original box (inner box: perfect, outer box, weathered)
• Original owner
  
• Owner's manual available online (contact me for link)
  

STEREO POWER OUTPUT  300 watts into 8, 4, or 2 ohm loads is the minimum sine wave continuous average power output per channel from 20Hz to 20,000Hz with both channels operating. The output RMS voltage is: 4.90 across 8 ohms 34.6 across 4 ohms 24.5 across 2 ohms 
MONO-BRIDGE POWER OUTPUT  600 watts into a 16, 8, or 4 ohm load is the minimum sine wave continuous average power output from 20Hz to 20,000Hz. The output RMS voltage is: 98.0 across 16 ohms 69.3 across 8 ohms 49.0 across 4 ohms 
MONO-PARALLEL POWER OUTPUT  600 watts into a 4, 2 or 1 ohm load is the minimum sine wave continuous average power output from 20Hz to 20,000Hz. The output RMS voltage is: 49.0 across 4 ohms 34.6 across 2 ohms 24.5 across 1 ohm 
OUTPUT LOAD IMPEDANCE STEREO 8, 4 or 2 ohms by connecting to the proper output terminals. MONO 16, 8, 4, 2 or 1 ohms by connecting to proper output terminals. 
TOTAL HARMONIC DISTORTION STEREO 0.005% maximum harmonic distortion at any power level from 250 milliwatts to rated power per channel from 20Hz to 20.000Hz, both channels operating. MONO 0.005% maximum harmonic distortion at any power level from 250 milliwatts to rated power from 20Hz to 20,000Hz.
INTERMODULATION DISTORTION STEREO 0.005% maximum if instantaneous peak power output does not exceed twice the output rating per channel, with both channels operating, for any combination of frequencies from 20Hz to 20,000HZ. MONO 0.005% maximum if instantaneous peak power output does not exceed twice the output rating for any combination of frequencies from 20Hz to 20,000Hz. 
FREQUENCY RESPONSE (at one watt output) +0, -0.25dB from 20Hz to 20kHz +0. -3.0dB from 10Hz to 100kHz 
HUM AND NOISE  (A-weighted) 105dB below rated output IHF DYNAMIC HEADROOM 1.9dB 
DAMPING FACTOR Greater than 40 
INPUT IMPEDANCE 20,000 ohms Unbalanced 40,000 ohms Balanced 
INPUT SENSITIVITY  1.4 with LEVEL Controls at maximum; 2.5V sensitivity marked. 
POWER REQUIREMENTS  120 volts, 50/60 Hz, 6 amperes US/CSA 
DIMENSIONS  17-1/2" wide (44.5cm) by 7-1/16" high (17.9cm) by 19-3/4" deep (50.2cm), including connectors. Knob clearance required is 1-1/8" (2.9cm) in front of mounting panel. 
FINISH The front panel is a combination of glass and black anodized aluminum. The chassis is black. 
WEIGHT 79 lbs. (35.8 kg) net, 97 lbs. (44 kg) in shipping carton.