McIntosh MT2 Turntable - Excellent condition - One Owner - Purchased on Dec. 2018 - Light Use

Excellent condition - One Owner - Purchased on Dec. 2018 - Smoke-free house - Current product

The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.

The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.

• CARTRIDGE SPECIFICATIONS

  • Cartridge Type Moving Coil, High Output
  • Output Level 2.5 mV at 5 cm/s
  • Load Impedance 1000 Ohms recommended (Preamp MC Input)
  • Frequency Response 20Hz to 50kHz
  • Channel Separation 35dB at 1kHz
  • Compliance 15 x 10-6 cm/dyne
  • Recommended Tracking Force 2.0 g
  • Channel Difference Less than 0.5dB at 1kHz
  • Total Mass 6.3 g
  • Stylus Elliptical Diamond
  • Cantilever Material Aluminum

  TONEARM SPECIFICATIONS

  • Bearing Sapphire and Ceramic
  • Arm Tube Dural-Aluminum
  • Counterweight Eccentric
  • Adjustments Vertical Tracking Angle, Antiskate, Azimuth

  TURNTABLE SPECIFICATIONS

  • Playback Speeds 33-1/3 and 45 rpm
  • Motor Type DC Motor with Stainless Steel Brushes
  • Speed Control Servo System
  • Platter Dynamically balanced polyoxymethylene (POM)
  • Platter Bearing Polished and tempered steel shaft in sintered bronze bushings
  • Signal To Noise Ratio 35dB - 40dB
  • Wow & Flutter 0.15% - 0.25%

  CONNECTIVITY

  • Stereo Outputs Unbalanced 1

  CONTROL

  • Power Control Input 0
  • Power Control Output 0
  • Platter Light N/A
  • Speed Control Fine Adjustment Yes

  GENERAL SPECIFICATIONS

  • Dust Cover Included Yes

  WEIGHTS & DIMENSIONS

  • Dimensions (W x H x D) 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm)
    Note: Tone Arm Height will vary depending on the type of Cartridge installed.
  • Weight 29 lbs (13.2 kg)
  • Shipping Weight 39 lbs (17.6 kg)