Mark LevinsonNo. 585usedMark Levinson No. 585 Integrated Amp -  200W RMS per channel with DACMark Levinson - No. 585 Integrated Amplifier Integrated Amp in excellent condition. One of the best sounding integrated amps ever made. The build quality is second to none. The No. 585 will be ship...5400.00

Mark Levinson No. 585 Integrated Amp - 200W RMS per channel with DAC [Expired]


no longer for sale

Mark Levinson - No. 585 Integrated Amplifier Integrated Amp in excellent condition. One of the best sounding integrated amps ever made. The build quality is second to none. The No. 585 will be shipped insured, double-boxed in the original factory packaging.   
Key Features:

Architecture • Fully discrete, mirror-imaged, dual-monaural analog circuitry featuring individual signal switching relays for each of its four stereo inputs: one XLR and three RCA.  • Volume controls use discrete R2R ladders and low-noise analog switches for the widest possible bandwidth and maximum signal integrity.  • The fully-differential Class AB power stage includes an oversized 900VA toroidal transformer with individual secondary windings for the left and right channels. Amplification • Each amplifier channel utilizes twelve output transistors and multiple smaller local capacitors that allow them to be placed physically closer to the amplifiers for greater transient response when power is needed immediately.  • Conservative power rating of 200W per channel.  • System integration and expansion are possible using the stereo RCA pre-outs which can operate full-range or with an included switchable, second-order, 80Hz crossover filter allowing for seamless integration into 2.1-channel systems with powered subwoofers.

Audio Chassis • An ESS Sabre 32-bit O/A convertor with proprietary jitter elimination circuitry and fully balanced, discrete IN circuitry forms the heart of the digital audio processing stage.  • Six digital audio inputs are provided including one AES/EBU, two coaxial and two optical plus a USB audio processor capable of asynchronous data transfer of high resolution DSD and PCM files at up to 192kHz/32 bits resolution.  • For low-resolution audio formats, proprietary Clari-Fi'" signal processing reconstructs information and bandwidth lost in compressed file formats restoring them to higher fidelity.

Control System integration and communication ports include Ethernet, USB, RS-232, IR input, and 12V trigger input and output.  An IR remote is included with the Nº 585

Construction • The chassis utilizes card-cage architecture to isolate critical low-level analog and digital circuitry from the power supplies and amplifier modules.  • The steel and aluminum construction features internal amplifier heatsinks and Mark Levinson's iconic black and silver anodized aluminum front panel with its intuitive twin-knob control system and unique red display. 

Specifications    Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz Damping Factor: >400 @ 20Hz, referred to 8 Ω Frequency Response:    20Hz – 20kHz, ±0.13dB    2Hz – 250kHz, +0.2dB/–3dB Signal-to-Noise Ratio:    >98dB (20Hz – 20kHz, unweighted)    >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting Voltage Gain: 40.7dB (maximum volume setting) Total Harmonic Distortion:    <0.01% @ 1kHz, 200W, 8 Ω    <0.1% @ 20kHz, 200W, 8 Ω Input Impedance: >45k Ω (RCA & XLR) Input Overload: 5.5V RMS (RCA & XLR) Sample Rates/Bit Depth:    PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit    DSD: Native, single- and double-speed Analog Audio Connectors:
  •    3 pairs single-ended inputs (RCA)
  •    1 pair balanced inputs (XLR)
  •    1 pair single-ended line outputs (RCA)
  •    1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors:
  •    1 balanced AES/EBU input (XLR)
  •    2 coaxial S/PDIF inputs (RCA)
  •    2 optical inputs (Tos-Link)
  •    1 asynchronous USB input (USB-B)
Control Connectors:
  •    1 RS-232 port (RJ-12 connector)
  •    1 IR input (1/8" phone jack)
  •    1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum
  •    1 programmable 12 DC trigger input (1/8" phone jack)
  •    1 Ethernet port (RJ-45 connector)
Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set) Power Consumption: Maximum 1000W (power on) Dimensions (HWD): 7.59" x 17.25" x 19.95" Weight: 72 lbs., 96 lbs. with packaging
Items from this seller