Rogers PA-1A Phono Preamp - Highly Reviewed and Best Phono Pre Under $15k

**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**

What a LOOKER.  We strongly think you'll agree!

While taking the photos for this listing we couldn't help and just stare at the beauty of this piece.  

The solid, almost glowing red, along with the red on the power button, contrasts against the beefy yet approachable feeling of the solid silver front panel and peak output voltage meters.

This phono preamp was fully tested in our lab and is working perfectly. 

In excellent overall physical condition, including the original box, manual, and power cord.

Snippets from a solid review by Jeff Dorgay over at AnalogAholic:

"As high-end audio continues to get higher priced, it is refreshing to find a company that is offering world-class sonics and state-of-the-art build quality at a reasonable price. Every Rogers component is built by hand, lovingly packaged, and even includes a nice card from the person who built it. The Rogers PA-1A is a great reminder that quality manufacturing is not dead in America.

The PA-A1 uses three tubes per channel, a 6GH8, a 12AX7 and the final gain stage uses either a 12AX7 or 12AU7. Rogers supplies both so you can adjust the gain to your taste. With the 12AU7, the PA-A1 has 58 dB of gain, which will be more than enough for MC cartridges having an output of around 0.5 mV. The 12AX7 provides about 10 dB more gain, but it’s slightly noisier, so it is a tradeoff.

Don’t hang too much on the ultimate gain figures, though; take total system gain into consideration before dismissing 58 dB as “not enough gain.” When using the Robert Koda K-10 preamplifier and the ARC REF 5 SE—which both feature 6 dB gain via the single-ended inputs (the PA-1A is a single-ended design)—I find myself cranking the volume a bit higher than I would normally with the ARC REF Phono 2 SE, but both of these linestages have a very low noise floor. The Burmester and CJ linestages at my disposal have 18 and 21 dB of gain, respectively, so the PA-1A’s 58 dB is enough even with low-output MC cartridges.

However, there is a Goldilocks solution. That second tube can be substituted for the NOS 12AV7, which offers a bit more gain than the 12AU7 and a lower noise floor. “The 12AV7 is a great tube,” says Gibboni, “but I didn’t want to build a product around tubes that are not readily available. I can sell you a pair of 12AV7s for about $90 while my supply lasts.

While the PA-1A technically has one input, if you were using a second table with a moving-magnet cartridge, you could plug two tables into the PA-1A—which is exactly what I do. 

Thanks to front-panel loading and capacitance adjustments, it’s a snap to dial your favorite MM cartridge to your liking."

SPECIFICATIONS
• Frequency Response: +/- 0.1 dB deviation from the RIAA curve, 10 Hz to 20 kHz
• Gain: 50 dB- 65 dB selectable thru input tube selection, both 12AU7 and 12AX7 supplied
• Input Impedance: Moving Magnet- 47 K ohm, Moving Coil-transformer input with front panel selectable cartridge loading. 100 ohm – 1 Meg ohm, 100 pF- 500 pF
• Input Jacks- unbalanced RCA
• Output Impedance: 1 K ohm- 1 Meg ohm
• Output Jacks- unbalanced RCA
• Noise Floor: 0.1 microvolt, input referenced, A-weighted and un-shorted
• Signal to Noise Ratio: 90 dB at 20 mV input
• Channel Isolation: 75 dB minimum
• Tube Compliment: 2- 12AU7, 12AV7 or 12AX7 (user selectable), 2- 12AX7, 2-6GH8
• Front Panel Controls: MC cartridge loading, MM or MC mode select, Mute switch
• Weight: 17 Lbs
• Dimensions: 18” width, 10” depth, 7” height
• M.S.R.P. - $7400

Thanks for looking and please click here if you would like to receive a list of the equipment we receive from time to time.  We promise not to bombard you with junk email.

----------

PURCHASING FROM SKYFI

This item will be professionally packaged and insured for safe transit to your home. 

Please click here for detailed specifics regarding our specialized packing process that separates us from the rest.

If we don’t have the original manufacture's packaging, we use heavy duty double ply corrugated boxes with Instapak expanding foam custom inserts.  In many cases this has proven to be better than the original packaging.  We also use high quality fiber reinforced tape to seal our packages.  Lightweight items will be bubble wrapped and shipped in a high-quality box. 

This item is available for pickup in Ridgewood, NJ or Union Square, NYC (with convenient parking in the building).

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Use the Buy It Now button and we will cover the PayPal fees.

Thanks for looking and be sure to call or text 201.879.0000 with any questions. 

Please also click here to visit our Audiogon store to see the rest of the items we have for sale.

----------

WHO WE ARE 

SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment.  We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk. 

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold.  We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support.  If you are local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.

PURCHASING GUIDELINES

We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

If you do not see a “Make an Offer” button, it means we are not considering any offers on that item.   

PAYMENTS

We prefer working through PayPal which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price.  You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you are picking up an item we do not accept PayPal.  You must pay in person with cash, certified or bank check, or wire transfer.  If you make a PayPal payment and are picking up the item, it will be returned. 

TRADE IN POLICY 

We accept trade-ins of equal or lesser value under certain conditions.  Simply ask and let us know the exact model, condition, and the accessories that are included (such as the original box, remote, cables, manual, etc.).  We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type.  We will offer a fair value for your equipment, but keep in mind we are running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment.  If you are looking for top dollar we suggest attempting to sell it directly to an end user on your own.

SELL US YOUR GEAR (Working or Broken)

We will also purchase your used or broken gear and arrange pickup if you are in our local market. Just drop us a note for a quote but be sure to include the condition and what is included. 

HOW TO VISIT US                                                                                                        

We are currently operating from a residence in Ridgewood, NJ.  You are welcome to make an appointment if there is a piece of equipment you would like to see in operation before or after purchase.  We have a well-equipped, dedicated listening room with tons of equipment of all makes and models.  We are not a store, so please don’t make an appointment if you are just curious as to how a speaker or piece of equipment sounds.  In essence, no tire kickers please.

If you are in NYC and cannot make it out to Ridgewood, we can arrange pickup in Union Square (14th Street) after the purchase.   You can call or text 201.879.0000 with any questions or to schedule an appointment.  We can also arrange to install, calibrate, and tune the gear in your listening room if you are local to the area.  This is super useful when purchasing large speakers or heavy amplifiers.  It is also great for ensuring your new turntable is setup correctly in its final resting place.  

V2.0