T+A PA3000HVusedT+A  PA3000HV  EISA Award wining productTechnology Like all HV machines, the PA 3000 HV is of consistently symmetrical, channel-separate construction. The pre-amplifier circuit boards with input section, the volume control and the hig...11888.00

T+A PA3000HV EISA Award wining product

Listing ID: lis9j459 Classified 
 Listed  · 411 Views
Time Left: 20 Days
Ending:

$11,888.00

Buy It NowMake Offer
Condition
8/10
Payment methodsPaypal card
Ships fromCliffwood , NJ, 07721
Ships toWorldwide
Package dimensions30.0" × 15.0" × 27.0" (75.0 lbs.)
Shipping carriersUPS or FedEx
Shipping costSpecified after purchase
Original accessoriesRemote Control, Box, Manual
Agon miniAverage Research Pricing

Technology

Like all HV machines,
the PA 3000 HV is of consistently symmetrical, channel-separate
construction. The pre-amplifier circuit boards with input section, the
volume control and the high-voltage amplifier are located in the upper
compartment under the case top cover; the symmetrical layout eliminates
electromagnetic influences. The compartment consists of thick-walled
aluminium plates, and is completely separated and shielded from the
power output stages, the current and voltage supplies and the
loudspeaker outputs in the bottom compartment.

The socket
section on the back panel reveals the PA 3000 HV’s comprehensive
connection facilities and rigidly symmetrical construction. There are
four balanced inputs which can alternatively be configured as unbalanced
types, plus two further unbalanced inputs and a recorder input. Input
No. 4 can be operated in surround (pass-through) mode in order to use
the power amplifier of the PA 3000 HV for the front channels of a
surround decoder. For the pre-amplifier there is one balanced and one
unbalanced output.

Two pairs of loudspeakers can be connected
to the solid high-current loudspeaker terminals, which are made of pure
brass with all surfaces rhodium-plated. H-Link (HV data bus), LAN
socket, trigger input, RC-in for E-2000 and an earth terminal are also
present. Since the momentary power drain can be very high, the machine
is fitted with an oversized mains input socket. The de-coupled feet are
adjustable, ensuring that the machines stand stably even on uneven
surfaces. Der PA 3000 HV is supplied complete with the F 3001 infrared
remote control unit. Upon request the P 3000 HV can be fitted with
High-End phono pre-amplifier modules, which feature different circuit
topologies for MM or MC pick-up systems. The analogue signal processor
module developed to act as signal controls for the P 3000 HV is
available for use with the PA 3000 HV and PA 3100 HV as well

Specifications

Pre-amplifier stage

Frequency response + 0 / – 3 dB 0,5 Hz –300 kHz Signal / noise ratio 105 / 110 dB Total harmonic distortion < 0,001% Intermodulation < 0,001% Channel separation > 90 dB Nominal input sensitivity High level (RCA) 7 x 250 mVeff … 6 Veff / 20 kOhms Balanced (XLR) 4 x 500 mVeff … 12 Veff / 5 kOhms

Outputs

Headphones 50 Ohms 1 x Recorder 250 mVeff / 100 Ohms PRE out RCA nom. 1 Veff, max 9,5 Veff / 50 Ohms PRE out XLR nom. 1,45 Veff, max 19,6 Veff / 50 Ohms

Output stage

RMS output per channel into 8 Ohms 300 Watt RMS output per channel into 4 Ohms 500 Watts Peak output per channel into 8 Ohms 380 Watts Peak output per channel into 4 Ohms 700 Watts Power bandwith 1 Hz – 150 kHz Frequency response + 0 / – 3 dB 0,5 Hz – 180 kHz Slew rate 60 V/μs Damping factor > 65 Signal / noise ratio > 115 dB Total harmonic distortion < 0,03 % Reservoir capacity 120000 μF

Mains / Accessories / Dimensions

Mains 110-120 V/60 Hz oder 220-240 V/50 Hz / 1500 W Standby < 0,5 W Remote control F 3001 Features Trigger input +5 … 20V for external switching-on
Input 4 can be confi gured in surround mode
(Surround pass-through) Dimensions (H x W x D) 17 x 46 x 46 cm Weight 38 kg Finishes Case: silver laquer 47 or titanium laquer 64
Heat sink: black 42 Technical modifi cations reserved
We have an instore 90 days warranty!

Questions for the seller
I take it doesn't have the phono boards?
Hello Bob, No it does not but we can order you a phono board since we are fully authorized T+A Dealers. Looking forward to being of service. The Team at Tweak Studio
Ask the seller a public question

You must log in to ask a question.

Return Policy
Return Window

Returns are not accepted on this item.

myavstudio 

member since March 2011

Tweak Studio Co  Verified Dealer

Last 12 months
All-time636100.0%
Shop more of this item

14 Watchers