Massive & Impressive... Purist Audio Design Limited edition LR Luminist revision power cable, two available priced each.

•                   

                       

  
               

The cable is about 2 meters in length and beautifully built with phenomenal sound quality.  
We have 2 of these cables, each priced and therefore sold separately.  8/10 condition, and come in PAD Packing.
These would be perfect for a pair of mono block amplifiers or any high quality Audio piece wanting better sound quality from.
Purist Audio Design is
proud to release our Luminist Revision Limited Edition-LR AC Power
Cable! The Limited Edition-LR AC Power Cable uses power conditioning
circuit technology that provides EMI/RFI noise control, filtering, and
reduction. It integrates the use of a multistage power conditioning
circuitry that passively controls, filters and reduces the effects of
EMI/RFI from coupling via direct conduction, induction and capacitive to
a level that allows the dynamics of music breathe and prevail.

AC Power Conditioning Circuitry...

The
circuitry features a custom magnetic control and passive multistage
filtering circuits that provides impedance compensation to effectively
attenuate and/or block the effects of EMI/RFI noise interference of a
broad frequency range of well below 200KHz up to in excess of 1GHz. The
circuit is implemented in such a way that it does not break the current
carrying conductors anywhere within the bounds of the input and output
connectors of the cord. This technique maintains the current capacity of
the cord by minimizing overall DC resistivity, minimizes the potential
for internal generated thermal noise, and maintains overall dynamics.
The circuitry is protected and shielded within an attractive durable
extruded aluminum housing integrated to main body of the power cord
located near the power entry point.

The
magnetic control circuit, which utilizes a custom configured
ferromagnetic material, provides for common mode noise suppression by
dynamically changing the high frequency impedance. Thus, causing high
frequency noise to be either absorbed and dissipate as small quantities
of heat are reflected back to the source depending on frequency and type
of noise. The passive multistage filtering circuit is designed for a
wide bandwidth attenuation of high frequency noise. At high frequencies
the reactance of the filter approaches zero at various frequency points
there by lowering the overall high frequency AC impedance, and thus
shunting the presence of any high frequency noise.

Unlike
purely reactive or traditional EMI/RFI filter circuits (composed mostly
of inductors and capacitors), which tends to induce additional
resonances within the signal path creating further noise potential, the
design of the magnetic control and passive multistage filter circuit is
such that it cannot. At high frequencies, the magnetic control circuit
is seen as a frequency dependent resistive device and operates as a low Q
series loss, non resonant element with virtually no series impedances
at the very low AC frequencies. In addition, the design nature of
multistage filter network is such that its reactance is inversely
proportional to frequency, and at low frequencies the reactance of the
filter increases without bounds. There by, it is effectively an open
circuit to low frequencies. This combination in circuit topology is
virtually transparent, and provides for a clean 50/60Hz power signal for
source equipment.

A Letter from Jim

I’ve
been in this business for over 25 years and for me, it started with
art. The art of the craft, the art of music and being able to truly
appreciate it as the artist intended. Our new, Luminist revision returns
to these roots and is, we believe, a true marriage of art and fine
engineering.

We
named it for the Luminist art movement, a movement which emphasized
depth and the beauty of the natural landscape and natural light.
Luminist artists were so skilled that they rendered their brush strokes
invisible, which kept the focus on the beauty of the painting. With our
nearly 30 years’ experience, we are hoping to give you those invisible
brush strokes, that you may hear music as truly, the artist intended.

Jim Aud

Founder and Audio Engineer

Purist Audio Design

Engineering, not marketing

Our
Luminist revision marries engineering and art in a way they were meant
to be. Constructed by hand by skilled craftsmen, and guided by nearly
30’ years experience in quality engineering, the Luminist sets a new
standard in high-end audio. 

Luminist Hilights

• Reengineered core wire to allow a more flexible design
• Improved the metallurgy of the wire across all lines
• New spade banana design to allow for easy change from spade or banana
• Enhanced build quality and design for all cables
• Enhanced Ferox and Contego Processing 
• Improved Triple Cryomag process
• New RCA connectors made from beryllium copper with silver then gold plating
• New ultra-high end plugs on our top of the line AC Power cables
• Refined engineering and enhanced design in our XLRs
• Built by-hand, by skilled artisans
• Engineered and built in the U.S.A

The
Luminist represents quality engineering from the ground up. Our new
Ferox process became Ferox 13, named because we polish it 13 times. Each
polish pulls the silicon molecules closer together. It is a more
efficient, spender design and requires less space to work. 

Our Luminist cables possess superior RMF, EMF, EMI noise reduction, and reduce vibration even better. It’s quality you can hear.

Engineering, not marketing

Hand-Crafted *  25 Years’ Experience in High End Audio  *  Made in the U.S.A

The above information is from the manufacturer.

======================================

Feel free to call with questions, I can be reached in my Los Angeles Audio & Video showroom weekdays (11-4PM) 310-472-8880 or after hours and weekends (10-10) on my cell 310-927-2260 or e-mail me directly at: [email protected]

Contact:  David Weinhart best to CALL with questions in Los Angeles Showroom from 11-4PM @ 310-472-8880 or my cell after hours and weekends from 10-10PM @ 
310-927-2260 or e-mail me directly at [email protected]     

For more information, visit my NEW & IMPROVED web site @www.weinhartdesign.com for great deals!

Weinhart Design has lots of other items new and used and if you’re in Los Angeles or visiting please accept my invitation to experience our World Class Audio Showroom (BY APPOINTMENT).

We are always interested in purchasing quality Audio and Video items, ESTATES & LP 
collections and most quality trades are welcome. 

All sales out of California are California State Sales Tax exempt. California 9.5% State Sales Tax applies only for items picked up or shipped to a California address. 

We accept payments by Bank Wire Transfers without fees and is the only form of payment on all sales out of the U.S. and Canada. We prefer this method of payment, which also makes shipping to addresses other than billing agreeable. VISA, MasterCard and Paypal are gladly accepted within the U.S. and Canada as long as the 
charge is approved and shipping to the billing address on record and adds 3% to cover costs. 

Please call me directly in my world class showroom in Los Angeles weekdays 11-4PM @ 310-472-8880 or on my cell including weekends from 10-10PM @ 310-927-2260 and I can answer your questions and help you with all of your new and pre owned needs. 

 Making Audio Systems better 

   one system at a time,

            
        David Weinhart 
     Weinhart Design, Inc. 
      President & CEO 

e: [email protected] 
   www.weinhartdesign.com 

 The Audio and Video Expert 
2337 Roscomare Road, Studio #1 
  Los Angeles, California 90077 

   Showroom) 310-472-8880 
       Cell) 310-927-2260