McIntosh C32 Pre Amplifier w/Cabinet

This McIntosh C32 Stereo Preamplifier has been thoroughly inspected by a professional repair technician and is in perfect working condition. It has been serviced, cleaned, and tested.

The face plate and cabinet are in good condition showing only minimal wear for its age. Please see pictures. The manual is freely downloadable from HiFi Engine.

We will ship within one business day. It is guaranteed to arrive in the condition described.

Description

The
McIntosh C32 preamplifier provides the most comprehensive range of
functions and control options. Many of these are new in a preamplifier.

The
C32 is a dual stereo preamplifier with a built-in monitor power
amplifier. There are two totally independent left and right stereo
program lines running through the preamplifier. One program line is the
listen program line. the other is the record program line. Each program
line can select its own program source from any connected input signal
i.e. phono, tuner, aux or tapes 1, 2 or 3 without interference with the
other program line.

The
output of the listen program line is affected by all the front panel
controls (except the record switch) and is fed to the main output and/or
output 1 and 2 jacks as selected by front panel push buttons. The
output of the record program line is not affected by front panel
controls (except the record switch) and is fed to all output record
jacks.

The
monitor amplifier program may be selected from either the listen or
record program lines. Separate gain controls for left and right monitor
amplifier are located on the top panel. The signal selected for the
monitor amplifier is fed to the front panel headphone jacks and the rear
panel output line and monitor output connectors.

Specifications

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.05%

Gain: 62dB (MM), 20dB (line)

Input sensitivity: 2mV (MM), 250mV (line)

Signal to noise ratio: 90dB (MM), 100dB (line)

Output: 250mV (line), 2.5V (Pre out)

Semiconductors: 67 x transistors, 35 x IC, 62 x diodes, 2 x field effect transistors, 1 x SCR

Dimensions: 406 x 138 x 330mm

Weight: 11.79kg

Finish: front panel is anodized gold and black with special gold/teal nomenclature illumination