**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**
This McIntosh A/V System Controller was just serviced in our shop where it received a new power supply, a common failure in this model after 20 years. It now works just like it left the factory and produces all the sweet sounding power expected from a McIntosh amplifier. And with our repair it should be good to go for another 20 years.
This is a full featured receiver - sure the component video switching is a bit outdated, but most people just run HDMI directly from their cable box / streaming box to the display anyway in order to get the purest connection possible.
This unit would also make an excellent home theater preamp as the jumpers connecting the amplifier section are removable. A nice upgrade path if you decide you want even more power down the line.
*Please note this specific listing does not include the internal AM/FM tuner,* which was an optional add-on (TM1) Module to this receiver when it was originally released. If this is something you desire please let us know and we can look to upgrade it for you.
• Separate Listen and Record Input Selection - The 7 Analog A/V and 6 Digital Audio Inputs can be reassigned for any desired signal sources. All six digital inputs can be assigned to any A/V signal source. Separate Record and Listen Circuits allow recording of one program source while listening to another.
• LED Indicators - The MHT200 includes thirty-three LEDs on the Front Panel. These LEDs indicate the Operating/Decoding Modes, Power Guard Activation, Surround Modes, Zone Selection, Late Night Dynamic Processing and the Trim Adjustments.
• Patented Power Guard - All channels include the patented McIntosh Power Guard circuit that prevents the amplifier from being over driven into clipping, with its harsh distorted sound that can also damage your valuable Loudspeakers.
Click here for a PDF copy of the original Owner's Manual
Preamplifier and Processor Specifications:
Left, Center, Right, Left Surround, Right Surround, Left Back, Right Back:
±0.5dB from 20Hz-20,000Hz
±0.5dB from 20Hz-140Hz
Total Harmonic Distortion
0.05% for all channels
Signal To Noise Ratio
Greater than 90dB A weighted
±12dB from the flat setting
Power Amplifier Specifications:
Rated Power Band (80Hz to 20,000Hz) into a 4 ohm load
2 x 160 watts
3 x 140 watts
5 x 130 watts
6 x 120 watts
Rated Power Band (80Hz to 20,000Hz) into a 8 ohm load
2 x 100 watts
3 x 95 watts
5 x 85 watts
6 x 80 watts
Front Panel: 17-3/4 inches (45.09cm) wide, 9-7/16 inches (23.97cm) high. Depth behind front mounting panel is 19 inches (48.26cm) including clearance for connectors. Panel clearance required in front of mounting panel is 1-1/8 inches (2.9cm).
73 pounds (33.1Kg)
This will be shipped in an official McIntosh super-sturdy and functional double box.
Thanks for looking and please click here if you would like to receive a list of new equipment we receive weekly. We promise not to bombard you with junk email.
PURCHASING FROM SKYFI
This item will be professionally packaged and insured for safe transit to your home.
This item is also available for pickup in Glen Rock, NJ, with convenient parking near our building.
Click here for specifics on our specialized packing process that separates us from the rest.
If we don’t have the original manufacture’s packaging, we use heavy duty double-ply corrugated boxes with Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box.
NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.
Thanks for looking and be sure to call us at 201-879-0000 with any questions.
WHO WE ARE
SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment. We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk.
Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.
Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support. If you’re local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.
We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers.
We prefer working through PayPal which allows you to use a credit card or bank transfer. We do not charge extra for any payment fees if you purchase the item at the asking price. You can also send us a personal check (which will need to clear before shipping), certified check, money order, or wire transfer. International clients without access to PayPal should use a bank wire transfer.
If you’re picking up an item we do not accept PayPal. You must pay in person with a certified or bank check, or wire transfer. If you make a PayPal payment and are picking up the item, your PayPal payment will be returned.
TRADE IN POLICY
We accept trade-ins of equal or lesser value under certain conditions. Simply click here to submit your gear for full consideration. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we’re running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. If you’re looking for top dollar, we suggest selling it directly on your own.
SELL US YOUR GEAR (Working or Broken)
We’ll also purchase your used or broken gear and arrange pickup if you are in our local market. Simply click here to submit your gear for full consideration.
SCHEDULING AN APPOINTMENT
We are currently operating from our shop located inside our dedicated building in Glen Rock, NJ. You’re welcome to make an appointment if there’s a piece of equipment you’d like to see in operation before or after purchase. We have several well-equipped, dedicated listening areas plus a dedicated studio with tons of equipment of all makes and models. We’re not a store, so please don’t make an appointment if you’re just curious as to how a speaker or piece of equipment sounds. In essence - no tire kickers please.
You can call or text 201-879-0000 with any questions, or to schedule an appointment. We can also arrange to install, calibrate, and tune your newly purchased gear in your listening room if you’re local to our area. This is super useful when purchasing large speakers or heavy amplifiers. It’s also great for ensuring your new turntable is setup correctly in its final resting place.