Award winning dCS Scarlatti DAC Silver Good condition. Transport is for sale separately. Remote control will be sold with transport but can control the DAC if you purchase both the DAC and Transport (sold separately). We can deal more if you are interested in both pieces.
Analogue OutputsOutput Levels: 2V rms or 6V rms on all
outputs for a full-scale input, set in the menu.
Balanced Outputs: 1 stereo pair on 2x 3-pin male XLR
connectors (pin 2 = hot, pin 3 = cold). These outputs are electronically
balanced and floating, the signal balance ratio at 1kHz is better than 40dB,
Output impedance is 3Ω, maximum load is 600Ω (a 10kΩ load is recommended).
Unbalanced Outputs: 1 stereo pair on 2x RCA Phono
connectors. Output impedance is 52Ω, maximum load is 600Ω (a 10kΩ load is
recommended).Digital InputsIEEE 1394 interface on 2x 6-way connectors. The
interface accepts dCS-encrypted DSD (1 bit data at 2.822MS/s).
2x AES/EBU on 3-pin female XLR connectors. Each will accept
up to 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 & 192kS/s and DoP DSD
over PCM) OR as a Dual AES pair, 24 bit PCM data at 88.2, 96, 176.4, 192, 352.8
& 384 kS/s or DoP or dCS-encrypted DSD.
3x SPDIF on 2x RCA Phono and 1x BNC connectors. Each will
accept up to 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 & 192kS/s AND DOP
(DSD over PCM).
1x SPDIF optical on a Toslink connector, will accept up to
24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s.
1x SDIF-2 interface on 2x BNC connectors, will accept up to
24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s or SDIF-2 DSD (auto-selected). If
the unit is not in Master mode, this interface requires a compatible Word Clock
input, locked to the data rate.
We do not accept bids by email. Only formal bids through the AudioGon system are considered. No trades.