PRO-JECT CLASSIC TURNTABLE - ROSEWOOD
WITH ORTOFON 2M SILVER CARTRIDGE FACTORY MOUNTED
CLEAR DUSTCOVER INCLUDED
Customer had for two days - drive pulley needed adjustment - we swapped him out with new table - drive pulley corrected. This table is as new.
www.dedicatedaudio.com toll free 955-991-8181
To new turntable model. The aptly named 'Classic' is a sleek, compact and elegant turntable based around the "frame" design popularized by the likes of Thorens and Linn in the 1950's and 60's, but implemented with the innovative technologies Pro-Ject have become known for.
The two-plinth design allows the motor to sit in a separate plinth to the bearing and tonearm, reducing the unwanted transference of electrical and mechanical noise. The two medium-density fibre plinth sections are isolated from each-other with the use of specially selected Thermo-Plastic Elastomers (TPE). The use of TPE, rather than the spring-loaded method of historical designs, makes The Classic effortlessly simple to set up while retaining anti-resonance properties.
The idea of anti-resonant structures also carries through to The Classic's platter. The general layout was inspired by the iconic Debut platter assembly, but the main platter has been significantly upgraded to a special aluminium alloy version which is internally lined with TPE damping. The sub-platter and bearing are also similar to the Debut design, but the tolerances are far tighter for The Classic, resulting in a higher-quality performance.
The Classic also boasts a radical new tonearm design, inspired by the production processes developed for the award-winning RPM 3 Carbon turntable. The tonearm tube is made from a sandwich composite of carbon and aluminium. The carbon fibre gives the arm rigidity, speed and reduced mass, while the aluminium delivers better overall damping. The tube is then supported by a new bearing assembly with ultra-low friction and wider movement for improved tracking. The nickel-plated counterweight not only looks fantastic, it's also TPE-damped to ensure the arm remains acoustically neutral. The Classic tonearm can also be VTA and azimuth adjusted to suit almost any modern pick-up cartridge.
The Classic is supplied as standard with the Ortofon 2M Silver cartridge, which has been developed exclusively for Pro-Ject Audio. This popular moving-magnet design allows The Classic to perform to a high standard right out of the box, and also offers upgrade options as your musical journey continues. The Classic is also supplied with a fitted dust cover, a junction box for easy cable upgrades and the Connect-IT E RCA cables. The three finishes (eucalyptus (black), rosenut and walnut) also mean The Classic can fit into any decor.
- Belt drive anniversary turntable with multi-plinth design
- MDF plinths (top plinth has metal layer 'sandwich' finish) separated by TPE suspension
- Height adjustable decoupling feet
- Precision balanced, TPE-damped aluminium-platter
- 9” carbon fibre/aluminium tonearm with MM & MC compatibility
- New tonearm bearing design with Japanese ball bearing (base of tonearm) and vertical cable outlet for unhindered arm movement
- Ultra low friction Zircon pin-point cardan tonearm bearings (top & side)
- Fully adjustable azimuth and VTA
- TPE-damped counterweight
- Supplied with Ortofon 2M Silver phono cartridge - Moving Magnet 5.0 mV Output
- Classic wooden chassis in rosenut
- Dustcover Included
Replacement Stylus: Ortofon 2M Silver Stylus Fitted Cartridge:Ortofon 2M SilverNominal Speeds:33/45Speed & Variance: 33: 0.10% 45: 0.11% Wow & Flutter: 33: 0.03% 45: 0.05% Signal-to-Nosie: -71dB Platter: 300mm Main Bearing: Stainless Steel Effective Arm Length: 230mm Overhang: 18mm Effective Tonearm Mass: 13.5g Tracking Force Range: 10 - 30mN Dust Cover:YesPower Supply:15V / 1.6A DCPower Consumption: 5.0W / <0.5W StandbyDimensions (WxHxD): 460 x 131 x 351mm (Lid Closed)Weight: 10.2kg