**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**
Might be the best sounding early amp from Mark Levinson due to its low output Class A design that's still being used today in many amplifiers - despite the advances of Class D.
The chassis and covers are near perfect (see photos). The handles have a few scuffs but nothing terrible.
Tested and working perfectly!
Yes it's priced like the day it left the factory in 1991 - and well worth it for a collector or ardent audiophile.
Rated power: 50W minimum continuous sine wave power into 8Ω, with both channels driven from 20Hz to 20KHz with no more than 0.1% THD (FTC). 100W minimum continuous sine wave power into 4Ω with both channels driven from 20Hz to 20KHz with no more than 0.2% THD (FTC).
Peak output voltage: 30 volts @ rated line voltage @ 8Ω
Frequency response: (-3dB) 4Hz, 122KHz
Input impedance: 50KΩ shunted by 1.5nF
Voltage gain: 26dB
Power consumption: Typically 100W @ idle, 200W @ rated power, 8Ω
Overall dimensions: See "Dimensions" in Owner's Manual
Shipping weight: 39.25 lbs. (17.8kg)
Two RCA-type connectors
Two XLR-type connectors
Eight five-way binding posts
One IEC mains connector
Mark Levinson No.29 Dual Monaural Power Amplifier Owner's Manual
The SkyFi Testing Process for Amplifiers (Solid State):
We start with a visual inspection of all internal components to make sure there are no signs of stress or aging. Capacitors are checked for telltale sings of bulging or leaking, resistors are checked for signs of overheating or cracking, and transistors are checked for signs of stress or damage.
We then power up the unit carefully and run a simple 1k sine wave while monitoring the output on an oscilloscope for signs of distortion or noise. Finally, we run the amplifier to its full rated power into the appropriate resistive load provided by our Sencore amplifier tester. If there is an issue, it will usually be noticeable at this point. If everything reads clean, we will often test for THD (Total Harmonic Distortion) measured by our Keithley distortion meter, and compare it against the original manufacturers specifications. The amplifier then remains powered on to "burn in" on our test bench for a few hours to make sure there are no heat related issues. If there are balanced inputs available they will be also be tested.
Final testing involves pushing actual music thorough the amplifier. We've learned over time that some issues are only noticeable to a trained ear while listening to familiar source material. Our test bench has reference vintage KEF speakers that we're very familiar with which quickly reveal any discrepancies. Some amplifiers will then move into our listening room where they are tested with our in-house reference speakers of choice.
Thanks for looking and please click here if you’d like to receive a list of new equipment we receive weekly. We promise not to bombard you with junk email.
PURCHASING FROM SKYFI:
This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. Please note that all local pickup items are only wrapped with industrial strength clear cling stretch wrap if the original manufacturer packaging is unavailable.
Local pickup is available in Glen Rock, NJ, just a half hour drive from Midtown Manhattan, with convenient parking near our building.
And if you’re looking to ship to Canada, simply follow this link to view and purchase this item. We ship to Canada via UPS Worldwide Expedited service and you’re responsible for any applicable import duties and taxes.
If we don’t have the original manufacture’s packaging, we use heavy duty double-ply corrugated boxes with custom made to your item Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box.
Click here for specifics on our specialized packing process that separates us from the rest.
NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.
Thanks for looking and be sure to call us at 201-879-0000 with any questions.
WHO WE ARE:
SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment. We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk.
Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.
Through our sister company which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support. If you’re local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.
We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers.
We prefer working through PayPal which allows you to use a credit card, bank transfer, and their special financing to spread out payments over six months. We do not charge extra for any PayPal fees if you purchase the item at the asking price. You can also send us a personal check (which will need to clear before shipping), certified check, money order, or bank wire transfer. International clients without access to PayPal should use a bank wire transfer.
If you’re picking up an item, we do not accept PayPal. You must pay in person with a certified check, bank check, or wire transfer. If you make a PayPal payment and are picking up the item, your PayPal payment will be returned.
TRADE IN POLICY:
We accept trade-ins of equal or lesser value under certain conditions. Simply click here to submit your gear for full consideration. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we’re running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. If you’re looking for top dollar, we suggest selling direct on your own.
SELL US YOUR GEAR (Working or Broken):
We’ll also purchase your used or broken gear and arrange pickup if you’re in our local market. Simply click here to submit your gear for full consideration.
SCHEDULING AN APPOINTMENT:
We are currently operating from our shop inside our dedicated building in Glen Rock, NJ. You’re welcome to make an appointment if there’s a piece of equipment you’d like to see in operation before or after purchase. We have several well-equipped and dedicated listening areas, plus a dedicated listening studio with tons of equipment of all makes and models. We’re not a store, so please don’t make an appointment if you’re just curious as to how a speaker or piece of equipment sounds. In essence - no tire kickers please.
You can call or text 201-879-0000 with any questions or to schedule an appointment. We can also arrange to install, calibrate, and tune your newly purchased gear in your listening room if you’re local to our area. This is super useful when purchasing large speakers or heavy amplifiers. It’s also great for ensuring your new turntable is setup correctly in its final resting place.