The Funk Firm Little Super Deck

Funk Firm Little Super Deck (LSD) turntable. Used- great condition.

Funk Firm's Arthur Khoubesserian started designing turntables in 1979. 33 and 1/3 years later, the new LSD 'table trips onto the analog stage. His "Little Super Deck" uses Funk Firm's patented Vector Drive, a three-point drive system that uses one DC motor and two slave pulleys to provide unsurpassed stability. The new F5 arm allows for a simple setup with an innovative calibrated sliding weight on the arm beam—the perfect support for any cartridge (please click the "Downloads" tab above for more information). The glass platter comes with a felt mat, but you can upgrade to a Funk Achromat to suit your ears. We spent a few late nights listening into the early morning with the LSD, and all felt the rhythmic drive and tremendous control of this masterfully built, gorgeous design.

"Putting the Funk Firm LSD through its paces proves that this table is a steal...I could not find fault with the LSD, no matter what kind of music I listened to. Those stepping up from anything in the $500-to-$1,000 range will be shocked at how much music is lurking in their record collection."

– Jeff Dorgay, TONEAudio

LSD's platter may be industry standard but it rotates on top of a quality, hand-burnished bearing. In turn, this is driven by a superb motor and control, stabilized by a unique three-pulley vector drive, which has delivered great results. The new F5 tonearm may be budget-priced, but careful choice of materials and constructions have resulted in a design with its resonances very well behaved. A clever variable mass tracking weight system helps optimize the arm for different cartridges which themselves really do have different preferences for arm characteristics and a nifty headshell that makes fitting cartridges and adjusting the important parameters of overhang and azimuth easy using just a single screw.

"I have taken quite a liking to the Little Super Deck. The focus is always on the musical content of the grooves. Throughout my listening, I felt involved with the music, rather than just listening to it, which is surely the whole point of the exercise."

– Tony Bolton, Hi-Fi World

Featuring Ortofon 2M Bronze cartridge.

• 2M Bronze Technical data
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency range at - 3dB - 20-29.000 Hz
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 my
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• Cartridge weight - 7.2 g
• 2M PnP MkII cartridge with integrated headshell weight - 20 g
• 2M PnP MkII cartridge with integrated headshell length - 52 mm

Replacement stylus unit - 2M Bronze (interchangeable with 2M Black)

Stylus lifetime: with proper care, we find that up to 1000 hours is possible without degradation of performance. Please read about stylus care on our FAQ.

2M Series styli interchangeability:

The 2M Series' engines, coils, and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:

- 2M Red, 2M Blue, and 2M Silver

- 2M Bronze and 2M Black

- 2M Mono and 2M 78