Boulder1021usedBoulder 1021 Network Disc PlayerPriced for quick sale - very good conditionShipping and PayPal fees includedNo longer needBoulder 1021 CD PlayerFormats: CD, CD-R, DVD-R, DVD+R, FLAC, WAV, AIFF, MP3, OGG VorbisSignal-to-noise rati...5000.00

Sorry, this listing has ended.

You may like one of these similar items:



Boulder 1021 Network Disc Player [Expired]


no longer for sale

Priced for quick sale - very good condition

Shipping and PayPal fees included

No longer need

Boulder 1021 CD Player

Formats: CD, CD-R, DVD-R, DVD+R, FLAC, WAV, AIFF, MP3, OGG Vorbis
Signal-to-noise ratio: 120dB
Analog outputs: Two pairs 3-pin balanced XLR, adaptable to RCA
Digital outputs:One AES/EBU, adaptable to S/PDIF
Volume: 80dB range in 1.0 dB steps
Dimensions:18.00" x 9.25" x 15.25"
Weight: 46 lbs.
Price: $24,000

Boulder Amplifiers
3235 Prairie Avenue
Boulder, CO 80301
(303) 449-2987
www.boulderamp.com

From Anthony Cordesman, TAS

Technology

If you are wondering why I put ergonomics and operating features first in this review, it is in the hope that these practical considerations will interest you enough to actually pay attention to some of the technology inside the Boulder 1021. I realize that many TAS readers are not heavily into technobabble, and that digital technology is all Geek to even more. It also takes Boulder six dense pages in a white paper on the 1021 to even survey its design features in summary form—much less get into technical detail.

This, however, is not your father’s CD player. It can play back digital recordings up to 192kHz/24-bit—the highest standard of high-res around. While it can’t play back DVD-A, SACD, or audio recordings using video formats, it can playback CD, CD-R, DVD-R, DVD+R, FLAC, WAV (PCM), AIFF, MP3, and OGG Vorbis. This means you not only can play the new high-res discs, you can download high-res content and make your own high-res discs in the future. 1

Be aware that this is not an entirely glitch-free process, but the minor problems that occurred in my use of such material with Boulder 1021 also occurred in using such discs on computers other than the one on which they were recorded, and generally seemed to be problems in the streaming process.

The Boulder 1021 also has some basic advances in technology that are important enough that you should at least be aware of them if you audition it and consider investing in a top player. The 1021 processes digital data in a fundamentally different way than virtually all other players, and in a form that does much to eliminate jitter and clocking problems. The Boulder White Paper on the 1021 summarizes this technology as follows:

“The disc mechanism is an extremely accurate, high-speed data retrieval unit with particularly low bit-error rates. Data is transmitted within the player in packets and is buffered once before (hardware) and once (software) after DSP to eliminate any jitter artifacts. The data is never converted to an AES or S/PDIF data stream at any point prior to analog conversion.”

“Digital signal processing in the 1021 is carried out by an Analog Devices SHARC DSP module. Incoming musical data is ‘packeted’ and asynchronous, instead of an AES or S/PDIF serial data stream. This eliminates any susceptibility to timing- or jitter-related clocking variances. Raw data is buffered when received by DSP and is manipulated entirely in the digital domain.

“All incoming data is sample-rate-converted to a minimum of 352.8kHz and bit-rate-converted to a minimum of 24 bits in DSP. Higher bit and sample rates are advantageous by way of enabling the use of gentler digital filtering, as well as providing the maximum data rate for the DACs.

“Digital filtering is accomplished via Boulder’s own Eigen-value algorithm. Eigen-value filtering is the best option for balancing frequency response and phase coherence and features the best known digital impulse response with regards to pre- and post-impulse ringing.

“A very important feature in Boulder’s digital processing scheme is the use of floating-point math for all DSP calculations. Floating-point math enables the processor to perform complex calculations without overflowing the processor. This eliminates product truncation and maintains absolute accuracy when data is processed or fed to the DAC section.

“Upon exit from the DSP section, the data packets are converted to a serial data stream (without a clock reference) for transmission to the D/A conversion section…

“The 1021 features a custom master clocking system that prevents timing inaccuracies (or jitter) from affecting the sound quality of the audio output. The traditional method of dealing with jitter has simply been to use a more accurate clock in order to sync and re-clock the data from its transmission from the mechanism in an AES or S/PDIF data stream all the way to the DAC section. Boulder’s engineers identified this as a particularly flawed methodology. Since the data is always embedded with a clock signal, any errors in the embedded clock signal as well as opportunities for jitter to infect the signal become compounded and more and more audible as the data travels from place to place. Boulder’s solution was to handle and transmit the data in a packetized, asynchronous format that has no embedded clock signal and is therefore not susceptible in any way to timing errors. The data is simply processed as necessary and is only clocked or timed in the digital-to-analog conversion section, specifically right at the DACs themselves. Since the Precise Interval Clock is located directly adjacent to the DACs, there is no opportunity for jitter to affect the accuracy of the clock signal to the DACs and clock timing is always accurate. Low-frequency modulation noise and jitter are thus reduced to immeasurable levels.

“In order to maintain proper data rates and processing speeds, the clock signal is then simply fed back to the DSP as necessary in order to sync the operation of all portions of hardware within the player without affecting data timing.”

If this is a bit too complex, Boulder does make its points more simply: “DSP operates on the floating-point math principle to eliminate any mathematical overflow and truncation. Data clocking is handled by Boulder’s own Precise Interval Clock, located directly adjacent to the D/A conversion section to eliminate noise-related jitter. Analog Devices AD1955A converters handle digital-to-analog conversion in a circuit yielding a significant reduction in distortion.

“Gain stages for the 1021 are the proprietary Boulder 983, based on the modular and discrete 993 gain stage used in all Boulder 2000 Series products. The 983 is a circuit board-implemented, high-current output gain stage featuring a mix of discrete and microcircuit parts which provide the best possible distortion figures and exceptionally low noise in a compact, board-mounted design . . . Balanced operation assures low noise in tandem with the use of the 983 gain stage. The 1021 is true differentially balanced at the outputs for optimal common-mode noise rejection. Lower distortion, and in particular, lower noise, contribute to much greater resolution.”

This summary is only part of the story. There are exceptionally sophisticated power supplies. There is a very high quality drive that can read DVDs as well as CDs. The analog sections use the best of Boulder analog preamp circuitry and components—and that is one hell of a “best.” Great attention is paid to layout and eliminating vibration.

The operating features I have described earlier are also made possible by putting a powerful host CPU in the player that is directly connected to the disc mechanism, RAM, front-panel buttons, and the 6.5" LCD VGA display. Boulder states that “this host CPU also provides a one-minute data buffer for all musical data received from the disc drive mechanism before passing the data along to DSP.” In practice, this allows the 1021 to check its read of the digital data on a disc and make sure that it is correct.

The Sound

I’ll get to sound quality with good-to-great recordings in a moment. If you really love music, however, you already know that these are a relatively small part of a large CD collection—much of which you may tend to consciously or unconsciously sideline because great music and great performances often do not correlate with great CD sound. Like many audiophiles, you may also find that bad-to-mediocre recordings are normally more fatiguing, if not annoying, on CD than on LP.

The Boulder 1021 can’t make bad CD recordings into good ones, anymore than the best plastic surgeon can turn a pig into a silk purse.2 It does, however, consistently get the cleanest and most musical result out of older and lower-quality CDs that I have heard from any player to date. The dynamics of the original recording and basic limits of the soundstage will not be markedly different than what you hear with other good players. Low-level detail and upper midrange and treble clarity and musicality will be. It may seem strange to encourage you to take a bad CD, or even an MP3, with you when you audition the Boulder 1021, but let’s focus on the music. One of the great strengths of this player is that it broadens the range of recordings you can really enjoy.

I’ve been waiting to mix in and metaphorize this analogy for years.

As you might expect, the Boulder 1021’s greatest strengths are with the best recordings, including those that pose some of the greatest challenges in resolving musically realistic sound from acoustic instruments—music with very-wide-range dynamics, and music with extended low-level passages.

One key test was playing the CD version of a recording through the Boulder 1021 while playing the SACD version through the EMM Labs SACD/CD player. I am not going to tell you that CD equaled SACD with the best SACDs. If you are listening to an SACD recording as good as the Boston Symphony Chamber Players recording of Mozart’s Chamber Music for Winds and Strings [BSO Classics 0601], you will hear cleaner upper octaves, more harmonics on string tones, slightly better low-level detail, and a very slightly more detailed soundstage. These differences are consistent with the best modern Telarc recordings and with the best European classical SACD from firms like Etcetera. (Try the Walter Boeykens Ensemble’s Mozart Clarinet Concerto in A [Etcetera KTC 5261].) The same will be true of the few jazz and pop SACDs that are truly great recordings.

You will find, however, that such differences between CD and SACD are slim to non-existent when you compare the sound of the CD track on the 1021 with that of most SACDs on other players, particularly those SACDs based on remastered older analog and digital tapes (You also will not hear the problem in the top octaves of some SACDs, where something strange seems to happen in the upper treble. I can see no technical reason for this to be part of the SACD process, but not every SACD has cleaner and more realistic upper octaves than CD.)

The Boulder 1021 also offers advantages that no SACD or DVD-A player has in dealing with the future of digital sound. The 1021 did a superb job with new high-res recordings. I had my son make a number of discs from 88kHz/24-bit and 96kHz/24-bit recordings downloaded from HDTracks. The Boulder 1021’s performance was consistently as good or better with such recordings than the best SACDs played back through any SACD player I have heard, including my reference EMM Labs SACD/CD player.

I don’t suggest that you go mad downloading your own high-res recordings. Some of the material on HD Tracks is not based on good enough recordings to justify the “high-res” label. Some of the downloads seem erratic and present problems in conversion to a DVD-R. The sound of the best high-res recordings, however, is superb. Not only is there a steadily expanding range of 88kHz/24-bit and 96kHz/24-bit recordings, but even higher 192kHz/24-bit sampling rates are available from Chesky and Reference Recordings. I particularly liked the Chesky Hancock Island [HR341] andJazz Side of the Moon [HR338] recordings. These have a degree of natural harmonic detail, low-level clarity, and dynamic definition that is truly exceptional.

The same was true of the tracks on Reference Recordings classical recordings like Arnold Overtures [HR-48], and on a wide range of classical, jazz, rock, and blues tracks on a Boulder high-res sampler. I found that really high sampling rates opened a whole level of detail and musical realism for every form of music and musical taste. As I say in the sidebar to this review, it is not yet clear that high-res will win enough acceptance to dominate the future of digital stereo, but from all my listening to date, it should!

This did not, however, make me ignore the merits of the 1021 in reproducing good CDs. In fact, I wish I could have somehow obtained the high-res version of a relatively early (1992) Keith Johnson recording of Albert Fuller playing Bach for Harpsichord [RR-51CD]. I have always found the harpsichord to be a brutal test of digital CD, and the Boulder did the best job I have yet heard of getting what seems to be an exceptional recording out of the regular CD. The midrange and upper octave harmonics of the music were more detailed and more realistic, without any added upper-octave emphasis. I would love to hear a 192kHz/24-bit version of the same recording to know if that would make a major difference.

And while we’re on Bach, the Boulder 1021 did equally well with demanding piano recordings. Daniel Barenboim did a live recording of the Bach GoldbergVariations in Buenos Aires in 1989 [Erato 2292-45468]. The recording is as valuable for its natural life as for the sheer quality of the performance, but it also seems to put exceptional demands on a CD player to get the best sound and, particularly, to capture the fine details of the hall that sometimes can be heard in the background. Once again, the Boulder provided the most musically realistic sound I’ve heard from this CD to date and the most natural overall timbre.

More broadly, clarinet, flute, violin, massed strings, and soprano voice also seem to put exceptional demands on CD, particularly if they are close-miked. I won’t walk you through the list of recordings with such instruments I used to audition the Boulder 1021, but it consistently provided better sound than I have heard previously from the same CDs. This was true regardless of whether I was listening to solo instruments, chamber music, or full orchestra. It was equally true of pops to opera in the case of female voice, and the Boulder 1021 was as gentle as any player when the singer pushed her limits at the top of her range, had poor breath control, or tried to eat the microphone.

As might be expected, the Boulder did an excellent job with more “digital-friendly” instruments like the guitar. It is remarkably realistic with really good recordings of solo acoustic guitar, and particularly in maintaining timbre with sudden sweeps in musical dynamics. It also does an exceptional job of reproducing percussion detail from soft brushes to cymbal to really demanding jazz drumming. This superiority was consistent with the full range of other acoustic instruments and with male voice, and with realistically reproducing soundstage and crowd effects on recordings made under concert hall and live conditions.

The 1021 did not favor “small music.” If you are into orchestra, opera, and big band, it is as open and exciting as any player around without sacrificing detail and subtlety. This included demanding, complex orchestral music that does not always fare well with even top-quality CD players. You can pick any recording of Mahler’s Eighth to hear this, and the 1021 does the cleanest and most detailed job I’ve yet heard of handling the two Telarc CDs of Saint-Saëns’ Third Symphony.

As for the ability to accurately reproduce deep powerful bass…my sons assure me that its rock performance is excellent. Speaking for myself, you can trust the 1021 to explore the limits of CD sound in detail, timbre, and open and lifelike dynamics. I have a mild addiction to testing the limits of bass and dynamics using the Jean Guillou organ transcription of Mussorgsky’s Pictures at an Exhibition [Dorian-90117]. The Boulder 1021 showed just how good and demanding this recording could be.

The overall timbre of the Boulder 1021 is slightly warmer and perhaps a bit stronger in the deep bass to midbass than a number of top competitors. This produces what I regard as a more natural, more musical balance, particularly in terms of lower midrange and upper-bass energy. It also means that the Boulder does not tend to spotlight the upper midrange and treble. It does not have less detail in these areas, but it does have less energy. The choice is essentially one between musical realism and apparent information, and I prefer music.

Let me stress, however, that this praise should be kept in proportion. I am talking about superiority in fine musical nuance, and I don’t mean to hype the Boulder 1021 into some form of miracle machine. Like every other CD player, it cannot transform the sound of inadequate recordings and it cannot overcome the inherent limits of 44.1kHz/16-bit by defying the laws of physics. What it will do, however, is get the best out of the music that is actually on the recording.

Above all, the Boulder is subtly and consistently more real in harmonic detail than the competition I have heard to date, and it provides that detail without spotlighting the upper octaves or shifting the imaging. This consistently reduced listening fatigue. And, yes, if I am getting too analytic, it also made the Boulder 1021 one hell of a lot of fun to listen to with the right track: Try “The Well” (track one) on the Jennifer Warnes recording of the same name [The Music Force SD8960]. Ms Warnes obviously had fun in playing around with the sound on this track; so will you!

Setup and Compatibility

As for setup, you need to be functionally literate enough not to just pop the 1021 out of the box without going through the manual. Setup is then very easy. As for compatibility, every manufacturer tends to voice its equipment to a given standard, and mixing components from different manufacturers can sometimes mask part of the nuances you will hear if you keep your components consistent. I did not, however, hear these kinds of colorations from the Boulder 1021. Its merits showed up just as clearly on my Pass Labs reference units as they did on the Boulder 1010 preamp and 1050 preamp; it was also fully compatible with tube amps and preamps. There was no need to search for interconnects with some kind of matching or corrective coloration. Any neutral interconnect will work just fine. In short, any compatibility problem will be in the rest of your system.

You will, however, have to make one trade-off in using the Boulder 1021. Its built-in volume control allows you to feed its output directly into Boulder, Pass, and other power amplifiers. Eliminating the preamp does remove a minor set of veils from the sound. I can easily see why some audiophiles would prefer it. However, even if you are willing to do without other front-end sources or to keep switching connectors, eliminating the preamp also eliminates the balance control. I feel this control is an essential part of any competent preamp design. I find many recordings need at least slight balance adjustment to get soundstage width exactly right, avoid channel imbalances from slightly altering the imaging, and get maximum depth. This is a trade-off that will be highly personnel, however, and I leave the choice to you.

Summing Up

The Boulder 1021 is good as a CD player gets in sound, features ergonomics, and style–and you can use it to go modern and upscale and listen to high-res. You do need to consider cost and the technical issues regarding the shifts in high-end technology. But if you have a large CD collection and are truly serious about music, the Boulder 1021 is an absolute must-audition. Even if you can only dream about buying it, you should hear this kind of reference standard. If you are among the lucky few who can buy, rather than dream, this player has to be on your short list.

SPECS&PRICING

Boulder 1021 CD Player

Formats: CD, CD-R, DVD-R, DVD+R, FLAC, WAV, AIFF, MP3, OGG Vorbis
Signal-to-noise ratio: 120dB
Analog outputs: Two pairs 3-pin balanced XLR, adaptable to RCA
Digital outputs:One AES/EBU, adaptable to S/PDIF
Volume: 80dB range in 1.0 dB steps
Dimensions:18.00" x 9.25" x 15.25"
Weight: 46 lbs.
Price: $24,000

Boulder Amplifiers
3235 Prairie Avenue
Boulder, CO 80301
(303) 449-2987
www.boulderamp.com

Reviewer Reference Stereo System

  • Dynavector 20X, Sumiko Celebration, and Koetsu Onyx cartridges
  • VPI TNT HRX rim drive turntable and JMW 12.7 tonearm
  • Tact 2.2X digital preamp-room correction- equalizer-D/A converter
  • EMM Labs SACD/CD player
  • Pass XP15 phono preamp
  • Pass XP20 stereo preamp
  • Pass XA160.5 power amplifiers
  • Vandersteen 5A speakers
  • Modified McIntosh G5 and iPod remote control acting as music server for Tact
  • Audioquest Niagara and K2 cables, Kimber Select, Transparent Audio Reference XL, and Wireworld Super Eclipse and Eclipse interconnects and digital cables 
blog comments powered by Disqus

Featured Articles

Lists

I can’t say that the Boulder 1021 is the best CD player in the world. I haven’t heard them all, and I have not had the opportunity to audition top competitors from Accuphase, Meridian, and dCS at sufficient length and in my reference system. My reference unit from Meitner, the EMM SACD/CD player, has prototype circuitry in it and this makes any kind of direct comparison unfair. What I can say is that the 1021 is an absolutely superb sounding unit, with superb ergonomics and display capabilities. It provides equally excellent performance with both the oldest, roughest Phillips and Sony CDs in my collection, and from the new 192/24 high-res discs that are coming out from Chesky and Reference Recordings, and the other high-res material you can download by going to HDTracks.

As you read this review, however, you also need to be aware of several facts. This is a $24,000 player. That price puts the 1021 into the category that only the very rich or the very serious audiophile can afford. Second, its superiority is a matter of nuances that come through most clearly in its ability to resolve the upper midrange and treble in a musically natural and realistic way and in its ability to handle music with wide dynamic range where low-level detail is critical. It does not revolutionize CD sound; no product can. Third, the Boulder 1021 is coming out at a time when the high end may be shifting to the use of computers and music servers and away from packaged media. Fourth, it is a stereo unit and not a multichannel unit, and it will not play music recorded on DVD-A, SACD, or any video format.

Items from this seller