VPI Super Scout Master w/ Extra Features
Listed · 1542 Views
12 Watchers
Items from this seller
This listing has ended.
Listings Similar to VPI
Time Left: None
This listing has ended.
Condition | |
Payment methods | |
Ships from | Monrovia, CA, 91016 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carrier | unspecified |
Shipping cost | $0.00 |
Average | Research Pricing |
LOCAL PICK-UP ONLY
This VPI turntable Bundle includes : VPI Super Scoutmaster
VPI JMW Memorial 10 " 3-D Printed Tonearm VPI Synchronous Drive System Ortofon Cadenza Bronze Cartridge Peripheral Ring Clamp Dust Cover (Slight scratches on corners) Maple turntable base Lead balloon stand
Turntable-
The finishing touches are the specially designed, totally non resonant vinyl wrapped chassis and the periphery ring clamp. The ring clamp lowers warp induced speed variations to near zero making the combination of HR-X flywheel drive and perfectly level record sound like a master tape.
Before you purchase any expensive table you must compare the facts. Does it have a flywheel drive? Does it have a warp flattening system? Does it have an inverted bearing running on a silent Teflon surface? Does the speed control come from a state of the art power supply? The Super Scout Master has all of this and more.
Tonearm-
Tonearm includes a counterintuitive.
The JMW Memorial 3-D Printed tonearm is the culmination of years of research into the mechanics of tonearm design and is an assault on the state of the art of analog reproduction at a time of renewed interest in vinyl playback. The machining and assembly are first rate and easily up to the levels of perfection found in VPI’s TNT series of turntables.
The resulting arm is extraordinary in its ability to extract information from an LP’s grooves. The soundstage is wide and deep with air and separation between the instruments. The feeling and solidity of images and top to bottom coherency is unmatched.
The (VTA) vertical tracking angle of the tonearm is adjustable during play in 0.00035" increments. Only the highest quality wiring, cartridge clips, and Lemo connectors are used for the purest sound possible.
According to Audio magazine’s Anthony Cordesman, "The JMW Memorial tonearm produces some of the tightest and deepest bass I have ever heard from analog." The Absolute Sound’s Harry Pearson gave the JMW Memorial 3-D Printed the coveted 5-star rating in issue 106..
Attention Record Collectors: Finally Enjoy the Correct Musical Pitch
Many historical recordings are not transferred onto modern records at the proper speed. Using SDS, you can now correct the musical pitch of these recordings by varying the speed of your turntable. In addition, collectors that have VPI turntables that run at 78RPM will be able to accurately adjust them to compensate for the wide variation in recording speed used in the 78RPM era.
Cartridge
Ortofon Cadenza Bronze and Retails for $2,309.00
Output voltage at 1000 Hz, 5cm/sec. - 0,4 mV
Channel balance at 1 kHz - < 1 dB
Channel separation at 1 kHz - > 24 dB
Channel separation at 15 kHz - > 20 dB
Frequency range at - 3dB - 20 - 55 kHz
Frequency response 20 Hz - 20 kHz - +/-1,5
Tracking ability at 315Hz at recommended tracking force *) - 80 µm
Compliance, dynamic, lateral - 12 µm/mN
Stylus type - Nude Ortofon Replicant on conical alu cantilever
Stylus tip radius - r/R 5/100 µm
Tracking force range - 2,2-2,7 g (22-27 mN)
Tracking force, recommended - 2,5 g (25 mN)
*) Typical value
Tracking angle - 23°
Internal impedance, DC resistance - 5 Ohm
Recommended load impedance - 50-200 Ohm
Cartridge body material - Stainless steel / Aluminium
Cartridge colour - Bronze/Black
Cartridge weight - 10,7 gram
Questions for the seller |
---|
Hello
Im Very interested in this table unfortunately i am located in IN. 46804, so local pick up is not an option for me. Would you be willing to consider shipping? At my expense of course. Please let me know your thoughts and lets see what we can work out.
Thank You My Friend.
Matthew Hi Matthew,
We would consider shipping it, but it would be very expensive for you. We don't have boxes for the lead balloon stand, maple base, or dustcover, power supply peripheral ring clamp. (About 6 boxes to make.) It would be time consuming to make the boxes and pack safely for shipping. We would have to charge $500. just for labor on this. The items are very heavy also, so would be expensive to ship. |
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.