VPISuper Scout MasterusedVPI Super Scout Master w/ Extra FeaturesLOCAL PICK-UP ONLY This VPI turntable Bundle includes : VPI Super Scoutmaster VPI JMW Memorial 10 " 3...4300.00

VPI Super Scout Master w/ Extra Features [Expired]


no longer for sale

LOCAL PICK-UP ONLY


This VPI turntable Bundle includes  :                                                                                             VPI Super Scoutmaster


VPI JMW Memorial 10 "  3-D Printed Tonearm                                                                             VPI Synchronous Drive System                                                                                             Ortofon Cadenza Bronze Cartridge                                                                                   Peripheral Ring Clamp                                                                                                                     Dust Cover (Slight scratches on corners)                                                                                 Maple turntable base                                                                                                                 Lead balloon stand 





Turntable- 





The finishing touches are the specially designed, totally non resonant vinyl wrapped chassis and the periphery ring clamp. The ring clamp lowers warp induced speed variations to near zero making the combination of HR-X flywheel drive and perfectly level record sound like a master tape.





Before you purchase any expensive table you must compare the facts. Does it have a flywheel drive? Does it have a warp flattening system? Does it have an inverted bearing running on a silent Teflon surface? Does the speed control come from a state of the art power supply? The Super Scout Master has all of this and more.





Tonearm- 





Tonearm includes a counterintuitive.





The JMW Memorial 3-D Printed tonearm is the culmination of years of research into the mechanics of tonearm design and is an assault on the state of the art of analog reproduction at a time of renewed interest in vinyl playback. The machining and assembly are first rate and easily up to the levels of perfection found in VPI’s TNT series of turntables.





The resulting arm is extraordinary in its ability to extract information from an LP’s grooves. The soundstage is wide and deep with air and separation between the instruments. The feeling and solidity of images and top to bottom coherency is unmatched.





The (VTA) vertical tracking angle of the tonearm is adjustable during play in 0.00035" increments. Only the highest quality wiring, cartridge clips, and Lemo connectors are used for the purest sound possible.





According to Audio magazine’s Anthony Cordesman, "The JMW Memorial tonearm produces some of the tightest and deepest bass I have ever heard from analog." The Absolute Sound’s Harry Pearson gave the JMW Memorial 3-D Printed the coveted 5-star rating in issue 106..





Attention Record Collectors: Finally Enjoy the Correct Musical Pitch


Many historical recordings are not transferred onto modern records at the proper speed. Using SDS, you can now correct the musical pitch of these recordings by varying the speed of your turntable. In addition, collectors that have VPI turntables that run at 78RPM will be able to accurately adjust them to compensate for the wide variation in recording speed used in the 78RPM era.





Cartridge 





Ortofon Cadenza Bronze and Retails for $2,309.00





Output voltage at 1000 Hz, 5cm/sec. - 0,4 mV


Channel balance at 1 kHz - < 1 dB


Channel separation at 1 kHz - > 24 dB


Channel separation at 15 kHz - > 20 dB


Frequency range at - 3dB - 20 - 55 kHz


Frequency response 20 Hz - 20 kHz - +/-1,5


Tracking ability at 315Hz at recommended tracking force *) - 80 µm


Compliance, dynamic, lateral - 12 µm/mN


Stylus type - Nude Ortofon Replicant on conical alu cantilever


Stylus tip radius - r/R 5/100 µm


Tracking force range - 2,2-2,7 g (22-27 mN)


Tracking force, recommended - 2,5 g (25 mN)


*) Typical value





Tracking angle - 23°


Internal impedance, DC resistance - 5 Ohm


Recommended load impedance - 50-200 Ohm


Cartridge body material - Stainless steel / Aluminium


Cartridge colour - Bronze/Black


Cartridge weight - 10,7 gram





 



brooksberdanltd 

member since April 2013

Brooks Berdan Ltd.  Verified Dealer

Last 12 months
All-time192100.0%
Items from this seller