Aesthetix Callisto - Signature Edition Tube Preamplifier with Dual Power Supplies

**Please click here to check out our newly launched SkyFi Audio website with additional items for sale**  

This is the Flagship line stage preamp from Aesthetix (Jupiter Series), utilizing dual power supplies (one per channel) along with dual mono construction. These don't come up for sale very often.

Working as it should all around, and a great match to the IO phono preamp that is also currently listed. 

It was updated to independent power supplies back in 2002. Aesthetix is still in business and still offers service and upgrades to this model.

CALLISTO TUBE LINESTAGE

Callisto is an all-tube linestage suitable for the most demanding audio systems and listeners. Fully balanced circuitry from input to output, including internal balancing of single-ended inputs, results in common mode signal rejection and cleaner sound. The innovative discrete switched resistor volume control maximizes resolution at any listening level. A separate power supply chassis removes any possibility of transformer noise corrupting the delicate audio circuitry. Peter Moncrief Stealth Capacitors are used in the Eclipse Edition for unparalleled sound quality.

• Fully balanced differential circuitry with ability to internally balance a single-ended input signal.
• Innovative and unique mechanically switched discrete resistor volume control with 46 positions using Roederstein resistors.
• Separate volume controls and input selectors for each channel.
• All tube amplification and output (8 tubes total).
• Separate vacuum tube regulated power supply utilizing 8 tubes.
• Two sets of XLR and two sets of RCA outputs per channel.
• Six inputs: First two single-ended (rca) or balanced (XLR); remaining four single-ended (rca) only.

Dual Power Supply
Callisto comes with a single power supply standard, or optionally a second power supply may be added for true dual-mono.

JUPITER POWER SUPPLY DETAIL

One defining characteristic of the Jupiter Series is separate power supplies. Each main unit, or audio chassis, is dual mono in construction; there are completely separate left and right audio boards and each has its own power connector on the rear of the chassis. Each main unit requires at least one power supply, a single power supply cannot power both an Io and a Callisto.

There are two versions of power supply available: Stereo or Dual Mono. In the stereo configuration, a single power supply powers both audio channels and has two power connectors on the rear. In the Dual Mono configuration, two separate power supplies are used, each with a single power connector. In the Dual mono configuration, the unit becomes pure dual mono, all the way down to the ac wall connection!

The Jupiter Series Power Supply is the size of a power amplifier and weighs approximately 50 pounds. The Power Supply has two main sections, the heater supply and the high voltage plus and minus supplies. At the heart of the heater supply is its massive, low flux, 210 VA power transformer which has fourteen separate secondary windings that are individually regulated and supply both the Power Supply and main unit heaters. The high voltage supply is composed of a similar massive 170 VA transformer which feeds a common-mode choke input filtering network and then high current vacuum tube regulators (one EL34/6CA7, three 12AX7 tubes per regulator). Each regulator is capable of supplying 600 volts at 100mA. There are two such regulators in the Power Supply. Each separate amplification or buffer stage has its own power supply filtering network and regulated heater supply to isolate individual sections and prevent stage interaction.

CALLISTO SPECIFICATIONS

Inputs: Six inputs: First two single-ended (rca) or balanced (XLR); remaining four single-ended (rca) only
Outputs: 2 RCA (SE) and XLR (balanced), 1 tape RCA
Line level gain: 23 dB single ended (SE), in/out, and 29 dB balanced/out
Volume control: switched resistor network volume control with 46 steps
Front panel controls: Left and right input select, left and right volume
Remote controls(optional): Volume, mute, balance, phase (option)
Frequency response: +- 0.25 dB, 20 Hz - 20 Khz
Signal to noise: measured at 70 dB minimum, A-weighted (ref 1 mv input, 75 dB gain setting)
Line input impedence: 100K ohms SE, 200K ohms balanced 
Output impedence: 1K ohms SE, 600 ohms balanced
Recommended amplifier load: 10K ohms or greater (SE), 20K ohms or greater (Balanced)
Tubes, each channel: (line section) V1 (6922), V2 (12AX7), V3 (6922), V4 (6SN7)
Power consumption: 300 watts

Physical dimensions: 
Main unit, MkII or Signature: 5 5/8" high, 19" wide, 18" deep including jacks
Main unit, Eclipse: 5 1/2" high, 17 1/2" wide, 18" deep including jacks
Power supply, MkII or Signature: 5 5/8" high, 19" wide, " deep including jacks
Power supply, Eclipse: 5 5/8" high, 17 1/2" wide, 18 1/4" deep including jacks

Shipping weights:
Main unit, MkII or Signature: 42 Lbs
Main unit, Eclipse: 47 Lbs
Power supply, MkII or Signature: 50 Lbs
Power supply, Eclipse: 55 Lbs 

CALLISTO TECHNICAL DOCUMENTS

Callisto Owner's Manual
Callisto Tube Placement
Callisto Important Notice

The SkyFi Testing Process for Preamplifiers:

We start with a visual inspection of all internal components to make sure there are no signs of stress or aging. Capacitors are checked for telltale sings of bulging or leaking, resistors are checked for signs of overheating or cracking, and transistors are checked for signs of stress or damage. Special attention is paid to the power supply which is the most common source of failure for preamps. We then power up the unit and run a simple 1k sine wave while monitoring the low voltage output on an oscilloscope for signs of distortion or noise to get a baseline. 

At this point we will lubricate and clean all switches and potentiometers (that are not sealed) with a high quality contact cleaner, and then re-test all functions for any signs of noise or scratching. 

Final testing involves putting actual music through the preamplifier We have learned over time that some issues are only noticeable to a trained ear while listening to a familiar source material. Our test bench has reference vintage KEF speakers that we are super familiar with which will quickly reveal any discrepancies. Some preamps will then move into the listening room where they will be tested with our in-house reference system. 

----------

Thanks for looking and please click here if you’d like to receive a list of new equipment we receive weekly. We promise not to bombard you with junk email.

----------

PURCHASING FROM SKYFI:

This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. Please note that all local pickup items are only wrapped with industrial strength clear cling stretch wrap if the original manufacturer packaging is unavailable.

Local pickup is available in Glen Rock, NJ, just a half hour drive from Midtown Manhattan, with convenient parking near our building.

And if you’re looking to ship to Canada, simply follow this link to view and purchase this item. We ship to Canada via UPS Worldwide Expedited service and you’re responsible for any applicable import duties and taxes.

If we don’t have the original manufacture’s packaging, we use heavy duty double-ply corrugated boxes with custom made to your item Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box. 

Click here for specifics on our specialized packing process that separates us from the rest.

NJ Residents or anyone picking up without a resale certificate will need to pay NJ Sales Tax.

Thanks for looking and be sure to call us at 201-879-0000 with any questions. 

----------

WHO WE ARE:

SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of select high-end audio equipment. We only buy equipment the we admire and are passionate about. No mid-fi, no gimmicks, no junk.

Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.

Through our sister company which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Pro-Ject Audio Systems, and Sony ES, we have access to OEM parts, service, and support. If you’re local and looking for new equipment from the above-mentioned manufacturers, please drop us a line as we can arrange both sales and professional installation in the tri-state area.

PURCHASING GUIDELINES:

We do not accept or review any offers that do not go through the official Audiogon system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers. 

PAYMENTS:

We prefer working through PayPal which allows you to use a credit card, bank transfer, and their special financing to spread out payments over six months. We do not charge extra for any PayPal fees if you purchase the item at the asking price. You can also send us a personal check (which will need to clear before shipping), certified check, money order, or bank wire transfer. International clients without access to PayPal should use a bank wire transfer. 

If you’re picking up an item, we do not accept PayPal. You must pay in person with a certified check, bank check, or wire transfer. If you make a PayPal payment and are picking up the item, your PayPal payment will be returned. 

TRADE IN POLICY:

We accept trade-ins of equal or lesser value under certain conditions. Simply click here to submit your gear for full consideration. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we’re running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. If you’re looking for top dollar, we suggest selling direct on your own.

SELL US YOUR GEAR (Working or Broken):

We’ll also purchase your used or broken gear and arrange pickup if you’re in our local market. Simply click here to submit your gear for full consideration.

SCHEDULING AN APPOINTMENT:                                                                                                     

We are currently operating from our shop inside our dedicated building in Glen Rock, NJ. You’re welcome to make an appointment if there’s a piece of equipment you’d like to see in operation before or after purchase. We have several well-equipped and dedicated listening areas, plus a dedicated listening studio with tons of equipment of all makes and models. We’re not a store, so please don’t make an appointment if you’re just curious as to how a speaker or piece of equipment sounds. In essence - no tire kickers please.

You can call or text 201-879-0000 with any questions or to schedule an appointment. We can also arrange to install, calibrate, and tune your newly purchased gear in your listening room if you’re local to our area. This is super useful when purchasing large speakers or heavy amplifiers. It’s also great for ensuring your new turntable is setup correctly in its final resting place.

v3.3