Revel Ultima Embrace Surround Speakers

These Revel Ultima Embrace wall mountable surround speakers, serial # 1481 and 1486 as originally shipped in one box, are in very good condition. Other than one small scuff mark shown in the photo, the black high gloss finish on the fronts, sides, tops and bottoms are virtually mint. Scuff marks on the back from wall mounting are irrelevant as they won't be seen once installed. Rated 7 mainly due to age.
These are incredible surround speakers!

The Revel Embrace surround speaker uses five drivers. A single 8" woofer is mounted on the front, with a 4" midrange and a 1" tweeter on each of the enclosure's angled sides. The 4" midranges and 8" woofer are the same drivers used in the Ultima Voice center-channel.
The Embrace can be configured for bipole, dipole, or Dual Drive operation. (Dual Drive is an arrangement available in a few surround processors—notably from Citation—that lets the user separately drive the front and rear drivers and change the mode of surround operation from the processor.) It can also be set up for electronic switching between dipole and bipole.

There are two additional controls on the Embrace: tweeter level and boundary proximity. The latter control can be switched to provide compensation for placement near the rear wall. The tweeter-level control is mounted on the rear of the cabinet, which is inconvenient for those who wall-mount their surrounds: You can't adjust the control once the speaker is mounted, and once it's in place, you won't want to move the Embrace's 40 pounds.

Ultima Embrace 3-way, 5-driver surround speaker
Drivers: two 1" soft-dome tweeters, two 4" metal-cone midranges, one 8" mica/carbon-filled copolymer-dome woofer
Radiation patterns: dipolar, bipolar, or Dual Drive (user-selectable)
Frequency response: 80Hz-20kHz, ±1.5dB
Sensitivity: 86dB SPL w/2.83V@1m
Impedance: 4 ohms nominal, 3.2 ohms minimum
Dimensions: 11.375" x 23.75" x 9.675" (HxWxD)
Weight: 40 lbs.