Bryston B135-SST2

Bryston B135-SST2 = $2200

Selling a gently used B135-SST integrated amplifier in silver. Perfect working order. One owner who took very good care of the amp. Please note the Bryston 20 year warranty transfers to the new owner!

Phone Pre-amp and DAC options not included.

B135 SST2
The Bryston B135 SST22 Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.
The B135 SST2 provides 135 watts per channel at 8 ohms and 180 watts per channel at 4 ohms. There are provisions for 7 high level inputs, a pass-through feature is also available in addition to, one tape loop and a preout/ main-in feature. A headphone jack is provided for those requiring monitoring and private listening provisions.

• Three completely separate and independent custom
torodial power supplies are employed to prevent any
possibility of channel to channel cross talk, interference
or interaction between digital and analog sections.
• Pass-through feature to allow for simple integration
into multi-channel surround systems.
• Pre-out/main-in connectors allow for complete
separation of the preamplifier and power amplifier
sections making multi-channel system integration
quick and easy.
• Gold plated five-way speaker binding posts and gold
plated RCA/SPDIF input and output connectors
provide long-term trouble - free connections.
Performance, Reliability, and Convenience
C-Series Integrated Amplifier

FEATURES INCLUDE:
• New cosmetics
• 135 watts per channel 8 ohms, 180 watts 4 ohms
• New SST2 output devices
• Over 30,000 MFD of filter capacitance per channel
• Three New ultra-low-noise power transformers - 2 for analog, - 1 for Digital
• Totally separate ground paths for Digital and Analog sections
• New computer modeled heat-sink design
• Two quick connect 12 Volt output triggers – One Programmable
• New Digitally Controlled Analog Volume
• Full Function Remote
• 4 Assignable Digital inputs
• R232 Control and Software Upgradable
• IR Control
• Headphone Jack
• Two Optical and Two SPDIF inputs
• 20 Year Warranty

PREAMPLIFIER
Frequency Response 20Hz - 20kHz +/- .05dB
IM or THD Less than 0.003%
High Level
Sensitivity
500mV
Rated Noise Ref. 500mV
20-20kHz - 100dB
Features • 6 stereo RCA inputs
• 4 with DAC option
• 1 stereo RCA output
• 1 stereo tape loop
• Headphone output
• Full remote control standard
• Optional MM phono stage
• Optional DAC

AMPLIFIER
Watts 135 watts per channel, 8 ohms
180 watts per channel, 4 ohms
Harmonic
Distortion
Less than .005% from 20Hz to
20kHz at 100 watts
IM Distortion Less than .005% from 10
milliwatts to 100 watts
Noise 108dB below full output
Slewing Rate > than 60 volts per microsecond
Power
Bandwidth
.5Hz to over 100kHz
Damping Factor Over 500 at 20Hz, ref. 8 ohms
Input Sensitivity
and Impedance
1 volt in = 100 watts 50 k
Features • Regulated power supplies to all
voltage gain stages
• Each channel employs completely
independent power supply
• Will deliver full output to any
phase angle at 4 ohms or higher.
• 1 stereo RCA input, 50K
• Pre-out/main-in connectors

Dimensions 19 or 17 x 4.75 x 16 inches,
48.26 or 43.18 x 12.1 x 40.64 cm
wt: 30 lbs, 13.6 kg
Finish Silver

+ BRYSTON WARRANTY
In a world where most things seem to need frequent
upgrading, repair, or replacement, how can Bryston offer
a comprehensive, unconditional, and fully transferable
warranty on every audio product we make?
The answer would quickly become apparent if you
were to tour Bryston’s plant in Peterborough, Ontario,
Canada. State-of-the-art design facilities, with the latest
CAD and circuit simulation software, and an inventory of
some of the best and most reliable parts on the planet,
combine with a manufacturing philosophy that eschews
the artifacts of mass production — robots, moving
assembly lines, and, frankly, shortcuts. Every Bryston
audio component is handcrafted by people who take great
pride in building the very best. We don’t skimp on testing
or rush our products through some last-minute go/
no-go check; at every stage individual parts, completed
circuit-boards, sub-assemblies, and final assemblies are all
put through rigorous inspection and testing procedures.
When completed, every Bryston amplifier receives a
comprehensive and carefully documented test of all its
functions, and the printed results of this computer-aided
analysis are actually packed and shipped with each unit.
During this intensive procedure, we not only reject any
product that falls outside of our advertised specifications,
but also any not meeting an even narrower band of
specifications that we use for internal testing. As a result,
you can expect each Bryston product to perform as least
twice as well as the advertised specifications.
Our 20-year amplifier warranty and 5-year digital circuit
warranty drives us in a different direction from the
typical manufacturer. We consider a Bryston product to
be a mutual investment: by you, in an amplifier of lasting
quality, and by us, in that we invest in the quality of the
product in order to be secure in offering our warranty. It
simply makes good economic sense to produce the very
best products we can.