Schiit Audio Vidar Open Box

This Vidar is open box new condition. This product get directly from Schiit dealer and the warranty will begin when you get the product. The Vidar cover by Schiit 5 years warranty.

Okay. Let’s blow up this high-end nonsense. Here’s your ultra-high-end amplifier, without the ultra-high-end price. Welcome to the revolution.

No-Excuses Amp, No-Brainer Price Vidar is nothing less than a no-excuses, exotic-topology, Class-AB, linear-supply, microprocessor-controlled, power-doubling, dual-mono-ish, intelligently-managed, drives-almost-anything power amp. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.   Small Size, Big Power  Don’t let the compact size fool you—pick up the Vidar to get a real feeling for the beefy 600VA transformer inside. Vidar may be small, but it’s also a powerhouse, delivering 100W per channel into 8 ohms, doubling to 200W per channel into 4 ohms.   Stereo or Mono Flexibility Combine Vidar with a single-ended preamp like Saga for a complete system with insane, no-compromise performance—for just a little over a grand. Or, run two Vidars from a preamp with balanced outputs (like our Freya) for true monoblock performance and 400 watts per channel into 8 ohms.   Intelligent Oversight and Protection In Vidar, a microprocessor oversees important aspects of amplifier operation, from DC offset to over-current and over-temperature faults. This provides stable, safe operation without invasive current-limiting, fuses, or active devices in the power supply path. In English, Vidar makes sure it’s operating optimally at all times—and protects itself when it needs to, so you can be assured of excellent performance for a long, long time.    Designed and Built in California By “designed and built in California" this is what we mean: the vast majority of the total production cost of Vidar—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture.    
Specification

Power Output:

Stereo, 8 Ohms: 100W RMS per channel Stereo, 4 Ohms: 200W RMS per channel Mono, 8 ohms: 400W RMS    Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB   THD: <0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms  IMD: <0.01%, CCIR, at 100W RMS into 8 ohms   SNR: >115db, A-weighted, referenced to full output    Damping Factor: >100 into 8 ohms, 20-20kHz   Gain: 22 (27dB)
Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 28V/22. You do the math.   Input Impedance: 22k ohms SE, 44k ohms balanced   Crosstalk: >95dB, 20-20kHz   Inputs: L/R RCA jacks for stereo input, single XLR for mono input   Topology: Fully complementary, all-BJT, current feedback, no coupling capacitors or DC servos Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with with relay shut-down for overcurrent, thermal, and other faults Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management.    Power Consumption: 700W maximum    Size: 9” x 13” x 3.875”   Weight: 22 lbs