Three Pangea - AC-9SE (MKII ?) - Power Cables. Three pieces sold together all with 15 Amp IEC Plugs, one pair two pieces in 6’ regularly $360 + $360 and one in 3’ 4" $230 all like new regularly $950 now only $449.
Please note: The three Heavy Power Cords look like MK-II but they are as pictured. and are trade in’s on MUCH more expensive models these likely represent at this price a "no brainer".
No low offers considered.
Pangea says : The Best Affordable High-current AC Cable Just Got Way Better…
The best affordable high-current AC power cable in the industry has just gotten a whole lot better. Pangea Audio’s AC-9SE has been upgraded as the new model AC-9SE Signature Edition MkII to include premium Cardas Grade One Copper in its conductors. AC-9SE MkII is the AC power cable of choice, for getting superior performance from hi-fi and home theater amplifiers, powered subwoofers, and other high current AV components.
This version of the AC-9SE MkII features a 20-amp DeathGrip™ IEC for use with high current gear that has a 20-amp IEC AC power inlet.
Despite its name, the AC-9SE MkII isn’t, in fact, a nine-gauge cable. It’s actually a seven-gauge cable, which means it’s even heftier than the nine-gauge! (The lower the gauge, the thicker the cable.) This difference is especially noticeable in the bass, where the AC-9SE MkII outperforms power cables costing many times more.
This 7-AWG design with its advanced combination of Cardas Grade One Copper conductors, OFC copper conductors, and Litz wire conductors offers a substantial upgrade compared to the already excellent AC-9 MkII. Furthermore, the AC9-SE MkII contains several times the amount of Cardas Grade One Copper than is used in the AC-9 MkII, and this makes a significant sonic difference.
"Quite Simply the Best Copper on the Planet"
The original version of AC-9SE used OFC, Long-Crystal Copper, Litz wire, and PCOCC copper conductors. The new MkII version goes a substantial step further, upgrading to a combination of 99.99% purity OFC copper, Litz wire, and – most important of all – no-compromise Cardas Grade One Copper, which George Cardas of Cardas Audio developed for his own premium cables.
George’s copper is mined in Arizona, then shipped to a New England factory where it is very S-L-O-W-L-Y drawn into conductors in a process that includes reduction annealing between steps to further purify and meld the copper into what George calls "the most amazing audio conductor I have ever experienced. It is quite simply the best copper on the planet."
"The bottom line is that the best phono cartridges manufactured in the world, the best transformer winders, and the best cable manufactures in the world are converting to this smooth sounding Cardas Grade One Copper," George reports.
"It is simply stunning how using a combination of space-age technology (reduction annealing) and ancient drawing process (diamond dies and a slow multi stage annealing) can result in such a refined product."
The combination of Cardas Grade One Copper, OFC copper, and Litz wire conductors makes the AC-9SE MkII Signature Edition an amazing component for the money, outperforming audiophile power cables that cost far more. So throw away the cheap, stock AC power cable that came with your AV component and make the easy, affordable upgrade to AC-9SE MkII. It will bring out the best in your system.
Because of their high-current requirements, power amps benefit from heavier gauge conductors than normal power cords offer. The AC9-SE MkII is specially designed to deliver the clean, high-current power needed by audio amplifiers – including stereo, mono, multi-channel, and integrated amps. It is also ideal for powered subwoofers, power conditioners, and other high-current electronic components.
One weak link in the power chain that is often overlooked is the IEC connector. We had found a good one for our Pangea cables. It had large contacts and gripped firmly. Then Jay Victor discovered another IEC connector with massive gold-plated contacts that gripped a component’s IEC better than anything he had ever seen.
"It’s like a death grip," reported Jay. "We need to use it on our high-end cables." We agreed with Jay, and the DeathGrip™ IEC was born.
Seven-Way Multi-gauge Geometry
The AC-9SE MkII uses different wire gauges consisting of a combination of Cardas Grade One Copper, OFC copper, and Litz wire copper conductors.
Counter-spiraled conductors offer superior noise rejection, and the triple-shielded design provides high-current noise isolation. The large-diameter 7-AWG construction boasts seven-way multi-gauge geometry optimized for high-current delivery of 50/60 Hz AC power. The solid-blade 24k gold-plated copper AC contacts provide superior electrical contact.
- Premium affordable audiophile AC power cable
- Designed specifically to deliver high-current power needed by audio amplifiers
- 20-amp DeathGrip™ IEC ONLY for use with high-current gear that has a 20-amp IEC AC power inlet
- 20-amp DeathGrip™ IEC with massive gold-plated contacts provides a solid, secure grip on component’s IEC
- No-compromise Cardas Grade One Copper and 99.99% purity OFC conductors for maximum conductivity
- Contains several times the amount of Cardas Grade One Copper as Pangea Audio AC-9 MkII power cable
- Solid-blade 24k gold-plated copper AC contacts
- 7-AWG construction for optimized high-current power delivery
- Seven-way multi-gauge geometry for optimized 50/60 Hz AC power
- Conductors consist of Cardas Grade One Copper, OFC copper, and Litz wire
- Counter-spiraled conductors for superior noise rejection
- Triple-shielded for optimized high-current noise Isolation
- 24K gold-plated contacts for superior electrical contact
- Ideal for power amps and other high-current electronics
Note: Each Pangea cable is individually handmade to strict design specifications.
It is best to call David and visit: www.weinhartdesign.com with questions
in Los Angeles Showroom 310-472-8880 or on my cell after hours and weekends 310-927-2260 any time from 10AM - 10PM.
Weinhart Design has lots of other items new and used and if you’re in Los Angeles or visiting please accept my invitation to experience our World Class Audio Showroom and please visit our web site @ www.weinhartdesign.com
We are always interested in purchasing quality Audio and Video items, LP collections and most quality trades are welcomed.
All sales out of California are State Sales Tax exempt.
California State Sales Tax of 9.5% applies for items picked up or shipped to a California address.
We accept payments by Bank Wire Transfers without fees and is the only
form of payment on all sales out of the U.S. and Canada. We prefer this
method of payment and also makes shipping to addresses other than billing agreeable.
VISA, MC and Papal are gladly accepted within the U.S. and Canada as long as the charge is approved and shipping to the billing address on record and adds 3% to cover costs.
Please call me directly in my world class showroom in Los Angeles weekdays @
310-472-8880 or any reasonable time on my cell including weekends @
310-927-2260 and I can answer your questions and help you with all of
your new and pre owned needs.
More Items from this seller
Visit our Weinhart Design The AV Experts E-STORE
Changing the Way You Listen,
Weinhart Design, Inc.
President & CEO
The Audio and Video Expert
2337 Roscomare Road, Studio #1
Los Angeles, California 90077