FLASH SALE ! !
JPS Aluminata 8 meter (26.25 feet) RCA cables (first version/ best value), as new, Reference quality sound, complete with wood cases and factory certificates now only $2,795.
Also available second pair no boxes 8/10 condition only $2,495 !
Highly recommended for spectalur sound and high VALUE...
One owner and non smoker.
Please see our other JPS and products listed on Audiogon and/or call David.
JPS labs interconnects and their cables have been judged since the early 2000's as one of the finest cables made.
Their Aluminata RCA cables brought rave reviews by Stereophile magazine and others and the fist version was ruffly only half the price the later version sells for...
We have several of these very desirable RCA cables, and this is your chance to grab a pair of these world class cables at a great deal.
We have a few lengths available in both pairs, and some single runs and recommend you call David Weinhart (the owner of Weinhart Design See numbers below).
We have listed the condition as 8/10, but they are really closer to 9/10 or better. These cables had an original price of 2,999.00 per one meter pair and 600.00 for each additional .5 meter.
Please Note: The price in this ad is for a one Meter pair and two pairs are available and more JPS Aluminata RCA cables are available in pairs and singles see below.
The itemized list below list shows the lengths and configurations are currently available separately.
Please See our other listings on Audiogon...
Call for special pricing on multiple cables but now low offers accepted as these are already well priced and will not last and the later version is roughly double the price.
As much as I can say about how amazing these RCA interconnects are and who could say it better than Stereophile Magazine in the following review.
JPS Labs Aluminata interconnect, speaker cable, AC cord Stereophile's Art Dudley said | Apr 22, 2007 Taken together, these unusual interconnect, loudspeaker, and AC cables brought a new measure of spaciousness, scale, smoothness, heretofore unimagined detail, and overall musical ease and naturalness to my music system. And they did it while sounding neither dull nor bright—just right.
I start with that observation not in an effort to be cute, but as a good-natured warning to ill-natured skeptics: Unless you're open to the idea that such a thing is possible, the 2300 words that follow will be little more than nonsense, howsoever differently I intend them.
There's more: From the moment JPS Labs offered to loan me these review samples, right up through the bulk of my listening and note-taking, I didn't know how much they cost. Of course I assumed they weren't cheap, given that designer Joe Skubinski described the Aluminatas, in genuinely excited tones, as his best ever. But it never dawned on me that a 1m interconnect pair, for example, would retail for $2999. And when I did look at the Aluminata portion of JPS Labs' price list, I shifted uncomfortably in my seat.
Just as Audio Note has its silver wire and Cardas its golden ratio, JPS has a calling card of its own: a proprietary conductor material called Alumiloy. Nominal appearances aside, pure aluminum is not the main ingredient of Alumiloy—although it plays a role, and may well give the finished product some of its signature strengths. Aluminum is low in density, nonmagnetic, and highly malleable. It also conducts electricity well, being surpassed in that regard only by the usual suspects: copper, gold, and silver.
But the greatest distinction of JPS's Aluminata line lies beyond its choice of conductors, in a realm where aluminum does play a decisive role. As Joe Skubinski sees it, the main challenge faced by a connecting cable of low reactance and resistance, where conductor mass and configuration are already appropriate to the current being passed, is that of outside interference. So he developed a cable shield to end all cable shields: Skubinski surrounded his insulated conductor cores with a thick blanket of granulated aluminum, densely packed and held in place with a polymer jacket. The result, called a Particle Aluminum Shield or PAS, is more flexible than a solid tube, yet many times thicker than a braided shield, with the potential for vastly better RFI and EMI shielding than any other practical solution—and a few that aren't.
That wasn't quite enough: Surrounding an electrical conductor with a metal tube and separating the two with a dielectric creates a crude sort of capacitor, with high-frequency AC finding a fairly easy route from the former to the latter. For the tube to function as a shield within an electrical system, it must be grounded at one end: common practice, in any event. Unfortunately, as Skubinski says, RFI sees that connection to ground as an impedance: Noise picked up by the antenna-like shield is dispersed through the system, and little of that energy actually makes its way to the electrical ground.
Skubinski wanted to make a cable that could itself absorb and dispense with any RFI and EMI energy, so he came up with an interesting variation on grounding the shield: He added a length of absorptive material—the precise substance remains undisclosed—between that thick layer of aluminum particles and the ground reference point of each Aluminata cable, which follows a conductive path to the ground. For the Aluminata interconnects, the ground point is at the source end; for the speaker cables, it's at the amplifier end; and for the AC cords, the ground path is at the same end as the wall receptacle.
Apart from their common approach to shielding, the three types of Aluminata cable I tried are built with different conductor sizes and configurations—not to mention their obviously different terminations. Aluminata interconnect begins life as a quartet of 15-gauge solid-core Alumiloy conductors, insulated with the flexible polyimide Kapton and terminated with WBT locking phono plugs. Aluminata AC has three 8-gauge alloy conductors, also insulated with Kapton, and uses a Wattgate plug and IEC connector, both with gold-plated contacts. JPS's largest Alumiloy conductors are reserved for the Aluminata speaker cable: a twisted pair of 5-gauge solid-core, insulated by hand—using cotton gloves, so skin oils won't be left behind on the otherwise clean alloy surfaces. The 6" leads at the ends of the Aluminata speaker cables are 8-gauge stranded alloy wires insulated with Teflon. Those leads are crimped and soldered to the 5-gauge Alumiloy conductors inside the cable structure itself, and are terminated with the buyer's choice of WBT spade lugs or locking banana plugs. Crimped connections on all JPS Aluminata cables are made and remade several times before the cable is finished—a prudent move, given the tendency of certain alloys to expand and contract with greater ease than others. Only lead-free solders are used.
Installation and setup
I tried the Aluminata cables, both individually and as a more or less complete connection rig (minus the tonearm lead and various remaining AC cords), in my main system: Linn LP12 record player and Sony SCD-777 SACD player, Artemis and Lamm preamplifiers, Quad and Lamm amplifiers, and Quad ESL loudspeakers.
All of the Aluminata cables were at least somewhat unwieldy: Bending them to a radius much smaller than 6" took more coaxing than usual, although they were far from the stiffest I've used. The more severe challenge was posed by the cables' substantial weight: The granulated aluminum shielding alone adds over a pound to every meter of stereo interconnect, and even more to the speaker cables and AC cords. Taken as a whole, the 1m Aluminata interconnect pair weighed approximately 2.5 lbs, and a single Aluminata AC weighed over 5 lbs. By comparison, a Quad monoblock amplifier weighs about 16 lbs. NEXT: Page 2 »
JPS Labs Aluminata interconnect, speaker cable, AC cord Weight was more of an issue with the speaker cables than the other Aluminata models: Their stranded termination leads were, of course, significantly more flexible than the rest of the cable; in my system, with the Quad ESLs raised somewhat inelegantly off the floor, the combination of heavy cables and floppy leads made hooking up a clumsier procedure than usual. Those WBT locking bananas weren't just a luxury, they were a necessity—without them, the Aluminata speaker cables disconnected themselves.
During their stay here, the JPS Aluminatas all worked without a hitch. I should also mention that even the most careful listening failed to detect any change in their performance during that time.
The first Aluminata cable I tried was the 6m interconnect pair, which seemed to lock in with my Lamm electronics from the start. Going from the very good Nordost Heimdall interconnect pair (reviewed in the January 2007 Stereophile) to the JPS Aluminata made for one of the most remarkable differences I can remember hearing between two nondefective audio cables. With the Aluminata in place, my system's performance was spacious and smooth—extremely smooth—and noticeably, obviously noiseless. Silences and spaces between notes and sonic "images" weren't even black: They were just dead-empty. Tunefulness, rhythm, and musical flow were all superb. Electric bass notes, as on the Jayhawks' "I'd Run Away," from Tomorrow the Green Grass (LP, American 43006-1), were dead-on in terms of pitch, with extremely well-defined attack and decay components. The long Aluminata interconnects, used from preamp to amp, also made my system sound larger overall, with a more convincing gradation of scale between the extremes.
Over the next few days I added the remaining Aluminata cables, one at a time: the 1m interconnect pair between phono preamp and preamp, the 2m pair between CD player and preamp, the speaker cables, and the AC cords with various components. The strengths I described above only expanded—especially the noiselessness, and my system's consequent gains in detail retrieval.
Remarkably, the last application I selected for the two Aluminata AC cords—powering my Quad ESL loudspeakers—made the largest qualitative leap of all. And to think that, as recently as 2003, I was an AC-cord skeptic!
With all of the JPS Aluminata products in place, my system had the same essential qualities as before: realistic texture and presence, an emphasis on musical flow and momentum, a bit of softness up top, not the world's highest ceiling in terms of drama and scale but convincing enough within those constraints. Yet my system's flaws were now less glaring, and almost all of its better qualities were enhanced. It was as if the whole system had been given an easier task.
I mentioned detail retrieval at the start, and on that count I scarcely know where to begin. There were a number of specific things I noticed for the first time with the Aluminatas in place, such as the neat chord changes played on the banjo in Randy Newman's cleverly arranged "Lonely at the Top," on Sail Away (LP, Reprise MS 2064), or the simple pleasure of hearing Newman tapping his foot during "God's Song," varying his intensity as the lyric progressed. And while I'd heard it plenty of times before, I now had a clearer glimpse of George declaring "I fucked it up!" just before the three-minute mark in "Hey Jude"—that and the fact that it's John, not Paul, who begins singing the lead at 6:48, just before the song fades out.
On the Band's "Strawberry Wine," from Stage Fright (LP, Capitol SW-425), the improvement wrought by the JPS cable combination was downright amazing. Richard Manuel's beautifully loose, crazy drumming gained impact and tone—the latter especially in the kick drum and floor tom, which now resonated more richly and believably than before. Robbie Robertson's guitar playing seemed less calculated, more spontaneous than usual. And, again, a wealth of subtle details was uncovered, such as Levon Helm's enthusiastic guitar strumming, and the backing vocals that were left unused for the LP mix—wisely, I think—but that nonetheless bled into an adjacent track.
Classical records enjoyed similar gains. That most mysterious and spiritual-sounding of all recordings of Wagner's Parsifal, the one made at Bayreuth in 1962 with Hans Knappertsbusch and erstwhile Lohengrin Jess Thomas, sounded even more mysterious and spiritual. Audience noise was easier to hear, of course—yet so were the players' subtlest intentions, with triplets and dotted notes becoming clearer in their rhythmic nuances. The clarity of intent that characterizes most of Knappertsbusch's recordings—his ability to make a large orchestra play like a smaller ensemble, while retaining its sheer scale and power—was brought to the fore.
The most stunning difference of all was in the hall sound itself: The full suite of Aluminata cables made that aspect of this very good recording even more obvious. It was exciting to hear how the ambient sounds changed as the soloists moved about on stage, and even more so with the full choir of Grail knights, as during the finale. Dramatic inflections in Knappertsbusch's subtle (and temporally drawn out) performance were also magnified with all of the Aluminatas. Similar ambient gains were obvious when I listened to the recording of Richard Strauss's Intermezzo that Joseph Keilberth and the Bavarian State Orchestra made in the 1960s at Munich's historic National Theater (Telefunken SLT 43085). The JPS cables gave the already generous hall sound on that LP a greater sense of physical depth, while allowing the instruments themselves to sound more substantial, less wispy and fussy.
As my time with the Aluminatas played out, I went back to the beginning and again experimented with different cable applications on their own, one at a time. Even the least expensive of the Aluminata samples—the 1m interconnect pair—made a clear and unambiguous change for the better in the sound of my system. Yet still, the Aluminata AC cords, used on my Quads, made the most significant improvements of all.
Raving about any cable, let alone ones so costly, makes me nervous. But, as a spin through my reviews in Stereophile's Web archives will demonstrate, I've never hesitated to suggest when a sonic difference was so slight that I might have imagined it.
That reticence isn't appropriate here: The differences made by the JPS Aluminata products were by far the most drastic changes I've ever heard when going from one interconnect, speaker cable, or AC cord to another. Put a little more bluntly, I've never heard wire do this before.
But as I write this, in mid-January, my property taxes are due, I have two usurious credit-card accounts loaded down with Christmas expenses (and amplifiers and resistors and tubes), everyone in the house needs new eyeglasses, my family would like very much to return to Martha's Vineyard this summer, at least for a weekend...and so would I. And here I am dancing around the fact that someone has sent me $40,193 worth of wire—and, gee whiz, whaddaya know, I want to tell the world how great it is.
But it is great, and there's not much I can do to change that.
Are the JPS Aluminata cables worth the money? Yes and no. Yes in the sense that one little company has worked like hell to design some evidently noiseless cables, then built the things up, virtually from scratch. Yes in the sense that, if listening to recorded music is the most important thing in your life and you have barrelsful of money, you should do everything in your power to maximize your playback system—including this. No in the sense that it's unreasonable to spend $40,193 on a set of audio cables—an amount of money that could otherwise buy a luxury automobile, or perhaps an evening of abdominal surgery.
It's your call. At the end of the day, all I can say is that the Aluminatas are, without a doubt and by a significant margin, the best audio cables I've used.
JPS Labs Aluminata interconnect, speaker cable, AC cord Specifications: Sidebar 1: Specifications
Description: Solid-core alloy conductors with granular aluminum shielding, configured as interconnect pairs, single-wire speaker cables, and AC cords.
Dimensions: Interconnect: 1m, 2m, 6m. Speaker cables: 8'. AC cord: 2m. Other lengths available.
Serial Numbers Of Units Reviewed: Interconnect pairs: 1m, 63068, 63069; 2m, 63066, 63067; 6m, 63070, 63071. Speaker-cable pair: 54353, 54354. AC cords: 32304, 32305.
Prices: Aluminata interconnect: $2999/1m pair with WBT locking phono plugs; $600 each additional 0.5m. Aluminata speaker cable: $6099/4' pair with WBT spade lugs or WBT locking bananas, $1200 each additional 2' pair. Aluminata AC cord: $3499/2m. Approximate number of dealers: 25.
Manufacturer: JPS Labs, 4893 Transit Road, Depew, NY 14043. Tel: (716) 656-0810. Fax: (716) 656-0811. Web: www.jpslabs.com.
It is best to call David and visit: www.weinhartdesign.com with questions
in Los Angeles Showroom 310-472-8880 or on my cell after hours and
weekends 310-927-2260 any time from 10AM - 10PM.
Weinhart Design has lots of other items new and used and if you're in Los
Angeles or visiting please accept my invitation to experience our World
Class Audio Showroom and please visit our web site @
We are always interested in purchasing quality Audio and Video items, LP collections and most quality trades are welcomed.
All sales out of California are State Sales Tax exempt.
California State Sales Tax of 9.5% applies for items picked up or shipped to a California address.
We accept payments by Bank Wire Transfers without fees and is the only
form of payment on all sales out of the U.S. and Canada. We prefer this
method of payment and also makes shipping to addresses other than
VISA, MC and Papal are gladly accepted within the U.S. and Canada as long as the charge is approved and shipping to the billing address on record and adds 3% to cover costs.
Please call me directly in my world class showroom in Los Angeles weekdays @
310-472-8880 or any reasonable time on my cell including weekends @
310-927-2260 and I can answer your questions and help you with all of
your new and pre owned needs.
Changing the Way You Listen,
Weinhart Design, Inc.
President & CEO
The Audio and Video Expert
2337 Roscomare Road, Studio #1
Los Angeles, California 90077
Cell) 310-927-2260 (10am-7pm Los Angeles time)