This Sansui Model 5000A is a wonderful piece. It had been in storage for a number of years when I got my hands on it. It looks to have been well cared for over the years and stored properly. I put in a good number of hours at the workbench into servicing and restoring this unit. I take great pride and care in my work and attention to detail is very important to me. Unit has been tested thoroughly and is ready to hook up and enjoy!
Cleaned and lubricated all controls with Deoxit products.
All PCB's were cleaned and inspected thoroughly and poor solder joints were reflowed.
Faceplate, knobs, covers and hardware were all hand cleaned and polished.
Rear panel was disassembled, each connector was cleaned and polished, all hardware was cleaned and all other rear panel components were checked and detailed.
Display bulbs were replaced and much more.
Tuning range: FM, MW
Power output: 55 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.8%
Damping factor: 15
Input sensitivity: 2.5mV (MM), 200mV (DIN), 150mV (line)
Signal to noise ratio: 65dB (MM), 70dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 200mV (line), 40mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 52 x transistors, 3 x FET, 4 x IC, 33 x diodes, 3 x zener diodes
Dimensions: 17-11/32 x 4-17/32 x 14-9/16 inches