Anthem STR Integrated

Designed, engineered, and Crafted in Canada, the STR Integrated Amplifier combines the benefits of an advanced preamp with the power of a massive amplifier and processor. It includes leading-edge DAC, onboard Anthem Room Correction (ARC®®), customizable bass manager for mono or stereo sub outs, MM and MC phono inputs—far more than the average integrated amp.

About this product
Good Condition traded-in Anthem STR Integrated Amplifier

The unit comes in its original box and packaging, with remote, power cord, manual and mic.

Rated 7/10 for minor cosmetic wear consistent with age and use. There is a line shaped light mark near the top of the face of the unit as well as a small mark on the top. See pictures for more info.

Specifications

• PHONO PREAMPLIFIER
• The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges
• Input Impedance 100 Ω (MC), 47 kΩ (MM)
• Input Capacitance 270 pF (MM)
• Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz) 3.6 mV (MC), 37.7 mV (MM)
• Gain (default at 1 kHz, user adjustable ± 20 dB) 55 dB (MC), 35 dB (MM)
• RIAA Response ± 0.1 dB (20 Hz to 20 kHz)
• THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) 0.008% (MC), 0.005% (MM)
• S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) 82 dB (MC), 96 dB (MM)
• PREAMPLIFIER
• Frequency Response
• digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB)
• digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB)
• digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB)
• analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB)
• analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB)
• THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)
• digital-in, 44.1 kHz, 0 dBFS 0.0008%
• analog-in, DSP mode, 1 Vrms input 0.001%
• analog-in, direct mode, 1 Vrms input 0.0020%
• SNR (at 1 kHz, IEC-A, 2 Vrms output)
• digital-in, 44.1 kHz, 0 dBFS 112 dB
• analog-in, DSP mode, 2 Vrms input 110 dB
• analog-in, direct mode, 2 Vrms input 120 dB
• Maximum Output (<0.1% THD) 2.2 Vrms except analog-direct 3.3 Vrms
• XLR Configuration Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted
• POWER AMPLIFIER
• Impedance 8Ω 4Ω 2Ω
• Power Output (per channel)
• (Continuous, 20 Hz - 20 kHz, <1% THD) 200 W 400 W 550 W
• THD (100 W) 0.002% (1 kHz), 0.015% (20 kHz)
• IMD (100 W)
• ITU-R (19 kHz + 20 kHz) 0.0007%
• SMPTE (60 Hz + 7 kHz) 0.005%
• SNR (IEC-A, ref. 200 W) 114 dB
• Frequency Response (20 Hz - 20 kHz) ± 0.1 dB
• Power Bandwidth (-3 dB at 200 W into 8 ohms) 80 kHz
• Slew Rate 30 V/μs
• Damping Factor (20 Hz - 1 kHz) 330
• Channel Separation 101 dB (100 Hz), 61 dB (10 kHz)
• POWER REQUIREMENT
• 120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
• 220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
• POWER CONSUMPTION
• Standby 0.38 W (120V), 0.45 W (240V)
• Standby + Network 1.1 W (120V), 1.2 W (240V)
• Idle 40 W
• Typical Use 250 W
• High Output 500 W
• DIMENSIONS
• Height 6-3/4” (17.2 cm)
• Width 17” (43.2 cm)
• Depth (not including power cord) 17-1/2” (44.5 cm)
• Weight (unpacked) 40 lb (18 kg)

Additional Information
Please call 734.662.3595 and ask for Richard if you have any questions about this product. We make every effort to update our ads quickly when inventory fluctuates, but we encourage you to call and check product availability, as we are also a brick and mortar store.

For a complete listing of all of our specials, please visit: Paragon Pre-Owned & Specials