LampizatorPair Pacific 211 fully balanced mono tube amplifiers usedLampizator Pair Pacific 211 TRUE BALANCED Mono Block Tube Amplifier with 4 NOS Western Electric 211E VT4C Triode Vacuum Tube and volume controlThis pair of Mono blocks have less than 50 hours so they have not finished their initial burning, in fact they are almost new and in perfect technical and comestic condition. • Pure Class A • 2 We...12500.00

Lampizator Pair Pacific 211 TRUE BALANCED Mono Block Tube Amplifier with 4 NOS Western Electric 211E VT4C Triode Vacuum Tube and volume control

Listing ID: lisb0fi8 Classified 
 Listed  · 1037 Views

13 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
10/10
Payment methods

Contact seller after sale to pay viaWire Transfer

Ships fromSaint-Mesmes, Seine et Marne, 77410
Ships toWorldwide
Package dimensionsunspecified
Shipping carrierUPS
Shipping costSpecified after purchase
Original accessoriesBox, Manual
AverageResearch Pricing

This pair of Mono blocks have less than 50 hours so they have not finished their initial burning, in fact they are almost new and in perfect technical and comestic condition.

• Pure Class A
• 2 Western Electric 211E VT4C Triode Vacuum Tube per amplifier
• Zero feedback, neither local nor global
• Zero solid state parts in audio circuits
• Unregulated and overspecified supplies
• Separate transformers for each task (three in total per side)
• Short signal path - from XLR to pot - 2 inches of silver wire, same  from pot to first tube, same from the first to the second tube and a hop across one capacitor to main tube without additional wiring.
• Power tube bias current is adjustable by user and monitored on analog needle meter
• No need for triode matching as the bias is set manually.
• There is a possibility to compensate aging drift on power tubes
• Pre-heating operation mode for tube (and for electricity saving)
• Pots can be bypassed completely by toggle switch for the “power amp” operation mode.

The amp is built around simple concept: to make it “as well made as sanely possible”. Without Gucci crazy stuff but otherwise - without compromise. 
So the power tube is the best we know
The power supply has oversized transformer, one separate transformer for every task - one for 211, one for small tubes and one for all heaters.
The small tubes have choke supply, and separate PSU for every half of the two triodes. The schematics is the best we know of.
The small tubes - again - have tube rectifier. 
211 have their own huge choke as well. 
Signal "path" wiring is super short - 4 inches in total per phase. 
All parts are very good, over-specified, used well under their limits and so on. 

And whats most important - the output transformer and power transformer  are of first class  - the famous OGONOWSKI type.
Very well tried schematics are in use - 80 % is Lampizator DAC scheme plus the power tube circuit .

The amp sounds VERY powerful, with strong bass, pure trebles, scary close mids, deep 3-d soundstage - all one can wish for and more.

THE NO-COMPROMISE MONOBLOCK POWER AMPLIFIERS

Hand made, custom order, high end equipment with vacuum tubes.

Those amps re-define the price point for owning the real deal 211 TRUE BALANCED mono amps that sound as good as 5 figure amps on the market at less than half price. We are aiming at people who would normally buy a push-pull KT80 amp, but from us they get not only monos instead of  stereo integrated, not only TRUE BALANCED instead of phase splitter but also the super cool super mean looks of the WE211 triode.

Specification of Lampizator 211 TRUE BALANCED version:

•Single Ended triode in mirror mode - TRUE BALANCED, mono block integrated amp (no need for a preamp)
•dimensions WHD : 450 x 140 (250 with tubes) x 600 mm
•weight: net 33 kg per each mono before packing (39,5 kg packed)
•Gross shipping weight of a pair: 80 kg (190 lbs)
•Power: 85 WPC, pure class A
•Power consumption: 195 WPC on idle per channel,
•95 W on pre-heating (per each block)
•Power Tubes: 2 Western Electric 211E VT4C Triode Vacuum Tube per amplifier
•Driver: White config 5687 - NOS
•Input tube Ecc808  - NOS
•Rectifier tube 5R4WGB
•Input impedance: 90 K x2
•Output impedance (speakers recommended) 4 or 8 Ohm
•Output transformer: OGONOWSKI / LampizatOr Push Pull 
•High Voltage transformer: Ogonowski (using audio output transformer  core )
•Biasing: manual (with exposed pot and meter)
•Volume: Stepped input ladder switch (24 SMD resistor pairs)
•Power transformers total capacity: 700 VA. 3 transformers in total
•Rectification: two separate rectifiers for High Voltage- one for 900 V (silicon) and one for 400 V (5c3s tube)
•Anode supply: 900 V DC
•Available front colors: black or silver (top always silver)
•Input topology: one XLR and no SE. SE input is not possible at all.
•Biasing range: -30 to -140 V DC (covers all 211 types)
•Mains transformers also covers 110 V countries.
Packing: two independent Flight Case

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.