Shunyata Sigma Analog Power Cord 20 amp IEC in 6 feet / 1.75 meters:

Serial: 1261

See review: http://www.theaudiobeat.com/equipment/shunyata_sigma.htm

As new comes with papers and distinguished caring case (see pictures).

HIGHLY Desirable as new and will not last long traded in on Synergistic Research (call if interested in discussing your best options for Power Cords).

NO LOW OFFERS CONSIDERED.

ΞTRON™ Σ SIGMA Series of power cords: are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE -
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component’s electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION -
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION -
Every facet of the Σ SIGMA model construction has benefited from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

A Power Conditioner in a Cable! -

The ΞTRON™ Σ SIGMA contains a hybrid ΞTRON™ circuit that measurably reduces power noise generated by the component itself. Essentially it is a power cable with a power conditioner built in, but without any of the negatives normally associated with active power conditioning boxes.

ΞTRON™ Σ SIGMA ANALOG Power Cord -

The Σ SIGMA ANALOG power cord was developed exclusively for all electronics that use linear design analog power supplies, such as pre-amplifiers, modest to moderate current-draw amplifiers, phono equipment and any and all line-level components. The Σ SIGMA ANALOG can also be used for power conditioners that are powering modest systems comprised of fewer than 5 components. The Σ SIGMA ANALOG has been optimized for maximum DTCD (Dynamic Transient Current Delivery) and compatibility with the broadest possible range of electronics, regardless of design within the ANALOG power supply realm.

The Σ SIGMA ANALOG power cord utilizes Gabriel’s proprietary ΞTRON™ that has been designed specifically to reduce the frequencies of noise that are most commonly associated with ANALOG component power supplies. The noise-filter elements used in the Σ SIGMA ANALOG are entirely passive and non-reactive, meaning they will never get in the way of current flow, nor will they interfere with the power supplies of the components. the Σ SIGMA ANALOG the ideal power cord counterpart to any ANALOG component application.

The Σ SIGMA ANALOG is more than large enough for all but the most extreme high-performance applications, so for those looking for a more reasonably priced and easy to use amplifier power cord, the Σ SIGMA ANALOG’s 8 gauge conductor mass is more than up to the challenge.

Suggested Applications:
Phono electronics of all types
Pre-amps
Amps
power conditioners
Tuners
Reel To Reel Decks

ΞTRON™ CONDUCTORS -

- Certified CDA-101 Copper
- VTX™ (virtual tube) Conductors
- SHUNYATA CopperCONN™ CONNECTORS
- Pure OFC Copper Base Metal
- Nickel plated for corrosion protection
- Superior Contact Grip
- ArNi Cryogenic Processed

SPECIFICATIONS -

STANDARD LENGTH: 6.0 feet (1.75M), 1M available
CABLE DIAMETER: 1.32 inches (33.53 mm)
NOISE REDUCTION TECHNOLOGY: Hybrid ΞTRON™ Digital, Analog & HC Filters
ELECTRICAL CONDUCTORS:- Shunyata ΞTRON™ - 8 AWG VTX™ Conductors
STANDARD CONNECTORS: IEC-C15: Shunyata CopperCONN™ (UL Listed, CE Mark), IEC-C19: Shunyata CopperCONN™ (UL Listed, CE Mark), US NEMA P15: Shunyata CopperCONN™ (UL Listed)

REVIEWS -

"A truly great audio component manages to preserve as much of the truth of the recordings it delivers as possible, even when those recordings contain flaws. It can bring us a step or two closer to the actual master recording and, without obscuring the flaws, show us enough of the music’s beauty and magic that we begin to forget those flaws. The very best among these components cause us to fall under the spell of the music, delaying bedtime or rushing home from work for another dose of the good stuff.

"The Shunyata Sigma power-cord system is just such a transformative component. That’s right -- component. It’s simply inaccurate to use terms like accessory or tweak to describe equipment that unearths so much music from the recordings we love." - Vance Hiner, The Audio Beat

"The Sigma Series of AC cables are the finest sounding cables I have had the opportunity to experience in my system. I used the Analog Version on each of my Ayre MX-R amps and KX-R preamp. The Digital Version was used on my MSB Technology Analog DAC / Analog Power Base. These are the most revealing AC cables I have heard that present music and voices in a relaxed, natural manner without accentuation of the lows, mids, or highs. I was impressed with the way that these cables handled female and male vocalists without bright or unnatural coloration. Substituting other audiophile AC cables for the Sigma Analog with the Ayre MX-Rs plugged directly into the wall, resulted in an increase in grain and hardness that was absent on the Sigma cables. These are state-of-the art cables in terms of transient detail, bass definition and impact, low level detail retrieval, and soundstage reproduction." - Steve Plaskin, AudioStream

=======================================================

Weinhart Design is always interested in purchasing quality Audio, LP collections,
specialists buying Audio Estates and interested in most quality trades in’s.

We are here to make better sound and earn your trust & business.

All sales out of California are State Sales Tax exempt. California State Sales Tax of 9.5% applies for items picked up or shipped to a California address.

We accept payments by Bank Wire Transfers without fees and is the only form of
payment on all sales out of the U.S. and Canada. We prefer this method of payment and also makes shipping to addresses other than billing OK.

VISA, MC and Papal are gladly accepted within the U.S. and Canada as long as the charge is approved and were shipping to the BILLING ADDRESS and shipping to the billing address on record and adds a 3% fee to cover costs and DISCOVER & AMEX 4% to cover costs..

Please visit our "ALL NEW & Improved Web Site @ www.weinhartdesign.com

Call me directly in my Audio showroom in Los Angeles weekdays from 11-4PM @
310-472-8880 or on my cell including weekends from 10-10PM at 310-927-2260 and I can answer your questions and help you with all of your new and pre owned needs.

 

Making better Sound One
system at at a time,

 

    David Weinhart

Weinhart Design, Inc.
President & CEO
The Audio and Video Expert

e: [email protected]
www.weinhartdesign.com

2337 Roscomare Road, Studio #1
Los Angeles, California 90077

Showroom) 310-472-8880
Cell) 310-927-2260