​I'm offering up for sale a Brand new, still sealed in  shrink ​​​​wrap Atlas Mavros grun ultra Interconnects.

I've been using the Mavros series for a while on my main system and absolutely love them.
I bought a second pair from the official distributor a few months back and never got to use them on my new secondary system. I ended up going in a completely different direction.
​​​​​​so it's a good opportunity to get a great deal on these amazing Interconnects.

Mavros Grun Ultra RCA

Atlas Mavros Ultra Grun RCA Analogue Interconnects

RCA interconnect cable based on the same design objectives and manufacturing techniques developed for our Asimi range, utilising copper rather than silver conductors.

 

The Mavros Ultra RCA is a high speed wide-bandwidth interconnect designed to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer.

 

The Mavros Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality. In the manufacture of Mavros, we maximise the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.

 

 

 

The cable consists of a pair of conductors, each made up from six bundles of 12 multi-conductor wires, plus a thicker centre wire. This in turn is covered by a continuous copper/Mylar™ electrostatic screen with copper shielding braid, ensuring minimal susceptibility to RF interference and noise.

 

Theoretically, the best dielectric (insulation layer) is air. Conventional dielectric (insulation) materials impose their own signature distortion and loss on the signal. Our technique uses a microporous PTFE (Teflon™) tape, which is wound around the core conductors, then covered again and stabilised using a protective FPE (Flexible PolyEthylene) dielectric. This process maintains the required conductor geometry, and bestows greater manufacturing consistency. Termination is with our low mass, high bandwidth, cold-weld Ultra RCA or XLR connectors, both of which have minimal effect on the integrity of the signal.

 

Construction Twin multicore dual drain

Material OCC

Dielectric Microporous PTFE (Teflon™)

Screen Braid + Mylar™, 100%

Capacitance 48.92 pF/m

Inductance 0.7256 µH/m

Resistance 0.0181

VOP 0.81

​​​Ultra RCA

​​​​​​

One of the biggest obstacles to achieving the performance levels equipment is capable of is noise. Low levels of RFI (radio frequency) and EMI (electro-magnetic interference) and noise on the signal ground all subtly modulate and degrade the overall noise levels of the system.

 

Ironically, this is generally only noticeable when eliminated – even though much of this ‘noise’ is theoretically at frequencies beyond the range of our hearing. The main sources are noise in the mains supply and component ground connections – mobile phones, ‘wallwart’ chargers and wifi networks are major offenders – while a percentage is actually generated within the equipment itself. Generally things have got worse with the advent of computer audio.

 

The Grun Coherent Earthing System addresses these issues by providing an ‘independent’ earth for users of Mavros and Asimi Ultra interconnects with the new Grun configuration.