Benchmark AHB2 Pristine Condition! Free PayPal/Shipping CONUS 48

9/10 
Absolutely perfect condition Benchmark AHB2 purchased only a year ago and barely used. I bought this to use in a secondary system that never came to fruition so I am selling. Stereophile Class A every year since its inception. Don’t miss this great opportunity to own this iconic amp. 
Stunning dynamics and transparency that have to be heard to believed. Manufacture date 2/1/22, so this is a really recent version. Don't miss this one as the price has increased for new units! Manual, original double box and accessories all included. Packed up and ready to ship!
Free Paypal and Shipping CONUS 48 only.

Specifications Rated Output Power 1 kHz, < 0.00015% THD • 100 W/channel into 8 Ohms, both channels driven • 130 W/channel into 6 Ohms, both channels driven • 190 W/channel into 4 Ohms, both channels driven • 240 W/channel into 3 Ohms, both channels driven • 200 W Bridged Mono into 16 Ohms • 380 W Bridged Mono into 8 Ohms • 480 W Bridged Mono into 6 Ohms Output Current • 29 A peak into 1 Ohm, both channels driven Output Voltage • > 80 Vpp into any rated load  Frequency Response • Better than 0.1 Hz to 200 kHz, +0/-3 dB • -0.01 dB at 20 Hz, -0.17 dB at 20 kHz, 8-Ohm Load • -0.23 dB at 20 Hz, -0.32 dB at 20 kHz, 4-Ohm Load Signal to Noise Ratio • 132 dB A-Weighted, Stereo Mode • 135 dB A-Weighted, Bridged Mono • 130 dB Unweighted, 20 Hz to 20 kHz, Stereo Mode • 133 dB Unweighted, 20 Hz to 20 kHz, Bridged Mono Distortion THD+N • 1 kHz, 80 kHz LPF, at full rated output into any rated load • < -118 dB (< 0.00013%) - Stereo Mode  • < -118 dB (< 0.00013%) - Mono Mode THD 1 kHz, 20 kHz LPF, at full rated output into any rated load • < -119 dB (< 0.00011%) - Stereo Mode  • < -120 dB (< 0.00010%) - Mono Mode  AHB2 Instruction Manual                  Rev H                        Page 23 Crosstalk • Better than -115 dB at 1 kHz • Better than -92 dB at 20 kHz Input Sensitivity • Low-Gain = 22 dBu (9.8 Vrms) • Mid-Gain = 14.2 dBu (4 Vrms) • High-Gain = 8.2 dBu (2 Vrms) • Use Mid-Gain or High-Gain settings for unbalanced inputs • Unbalanced inputs require RCA to XLRM adapter cables  Input Impedance • 50 k Ohms, normal mode • 1 M Ohm, common mode Input CMRR • 80 dB at 20 Hz, typical  • 80 dB at 1 kHz, typical  • 65 dB at 20 kHz, typical Trigger I/O • 12 VDC 200 mA current-limited output to trigger turn-on of remote devices  • DC input for slaving to remote devices • Input responds to 3.3 V logic and higher, VIL = 1.26 V, VIH = 2.7 V • Absolute maximum input voltage = 30 Vdc • Absolute minimum input voltage = -0.3 Vdc • Input Impedance = 20 k Ohms • Two 1/8" (3.5 mm) TRS jacks • Tip = 12 Volt Trigger I/O, Ring = no connection, Sleeve = chassis ground Damping Factor • 350 at 20 Hz, 8-Ohms • 254 at 1 kHz, 8-Ohms • 34 at 20 kHz, 8-Ohms • 7 at 200 kHz, 8-Ohms Environmental • 0° C to 50° C (32° F to 122° F) Ambient Temperature • Up to 80% Humidity - Non-condensing