Harmonic Technology Cyber P2A XLR 5m (16') Cables pair w/INEX Linear Power Supply

SALE:
Harmonic Technology Cyber P2A XLR Analog Fiber Cables in 5m (16 feet) long pair. These XLR interconnects are designed for Preamp to Amp, hence the name.  Excellent for long runs with zero loss. 

Made in the USA.

 Comes with INEX regulated Linear power supply 10.5V DC with outputs, the Inex is the higher performance & nice up grade option alone regularly sold new for $600. We also have several of these cable in 1.5m and in the Cyber Wave. Best to call for special discount when purchasing multiple pairs.


One of the best sounding cables made (especially at this high valued low price) and highly recommend by Michael Fremer and the Weinhart Design Audio team

It is best to call David Weinhart with any questions (see information below):

Color: Blue The P2A is a active / powered Analog Fiber Base fiber-class interconnects cable is optimized for connecting PreAmp to Amplifiers.

This is not a classic copper or silver interconnect cable. This Cyber P2A cable is optimized for Amplifier's to Pre Amplifiers.

This P2A is "virtually loss less" and a almost perfect pair of XLR / Balanced cables. This product has been considered the best interconnect available to connect to the most amplifiers.

Harmonic Technology's Light Analog Module (LAM) Photon Transducer is a tiny module built into the cable right at the RCA or XLR plugs. The LAM converts voltage to laser light, which is then transmitted via audio-grade glass fiber to a receiver in line with the RAC or XLR plug at the other end of the line, which converts the light back to voltage. Once the conversion to light has taken place, the light moves at, of course, the speed of light (ca 186,000 miles per second), with no resistance, capacitance, "skin effect," inductance, RFI or EMI reception, etc. You needn't worry about crossed power cords or static electricity; dressing cables to prevent induced hum or keeping them off the floor become nonissues. In fact, Harmonic Tech claims no signal loss of any kind in cable runs of up to 200 meters. And with no conductive wires between components, all potential ground loops are eliminated.
There is no digital conversion, nor is amplitude or frequency modulation involved. The process is purely analog. Because the signal is unidirectional, there is no back-reflectivity of the signal.

The following statements are to evaluate the suitability of the Cyber P2A  to the selected amplifiers:

The Cyber P2A input is 1.25 Vrms; however, the Photon AMP’s input should always keep not over 2 Vrms. The most important factor to determine is your Amplifiers’ Maximum INPUT Sensitivity Value. You should keep your PREAMP volume not beyond this value. Since many Preamp or volume-controlled source components could allow the output Vrms goes beyond the 2 Vrms maximum; however, if the Amplifiers can only allow not more than 2 Vrms, the Photon AMP still can be used. Key Features: Some customers and reviewers considered the Photon AMP’s performance so excellent; they didn’t feel that there were any cables among all their components. This is the utmost goal for any cable products -- the best way to put it is: “you don’t feel any CABLE existing AT ALL”. This is most musical, noise free cable. It ensures entire signal path in the purely and completely analog domain; without any digitalization.

Photon light signals make it immune from EMI and RFI interference Musical information has preserved to a greater degree because there is no digitalization has been used. No sampling or mathematical algorithms problems exist. This product assists your system to have even greater depth, airiness and wider soundstage Easy component impedance matches, therefore your components can perform at its best. (Input from the PREAMP might be 20,000 ohm, the output from the Photon AMP is only 75 ohm) The bass is the tightest, deepest, and most articulate, with no bloat—just rich tones and superb definition Highs are crystalline, precise and all musical passages unravel with ease One-year warranty Revolutionary Fiber Optic Interconnect Cable As two-channel and multi-channel music and even surround systems reach ever greater resolutions, selecting the best interconnects to bring each component together into perfect harmony has become one of the most crucial and complex decisions. For the truly discriminating, the choice is fiber-optically clear: Blue-jacketed Photon Amp analog interconnects. By adapting glass fiber and laser-like technology to the audio realm, Harmonic Technology has created a new generation of interconnects to bring the ultimate level of performance to audiophiles. Through patent-pending, miniaturized LAM (Light Analog Module) Photon Transducers, the Photon Amp converts audio signals to light pulses, with absolutely no digital conversions, to unleash the sonic depth, accuracy and power of every signal. The entire signal path remains purely analog without any sampling to capture amazing clarity. The photon density modulated optical information travels at the speed of light to eliminate any capacitance, inductances, skin effects, phase shifts and signal loss up to 200m. The result is a seductively quiet background, luscious harmonics and a transparent three-dimensional soundstage. Ground-Breaking Technology The Photon technology is truly ground-breaking. The photon density modulated light signal actually does break the ground between components yielding a signal largely (or completely with i-Pure DC PS) unaffected by humming noise along the ground plane. With the signal path completely isolated from the ground, the Photon Amp ensures that there is no possibility of the cables passing noise between components, nor acting as an antenna for RFI or EMI induced distortions, which keeps the noise floor extremely low and reduces smearing.

Please note: Because there are no physical wires built within the Photon Amp, you should ensure components are on the same ground level. When the destination components of the Photon cable is “AMP”, you should always use the Photon AMP, (not to use the Photon Link to connect to AMP) Operation of the Photon AMP with the i-Pure DC Power Supply. Before any installation, the Power Amplifiers have to turn off first. Plug silver wire(s) to the Photon Cable(s). Plug AC power cord to i-Pure DCPS. Plug AC power cord to AC socket. Assure Power Amplifiers being OFF. Turn on (switch on) i-Pure DCPS. Turn on audio components except Power Amplifiers. Turn on Power Amplifiers.

     ================================================================


We are the #1 Estate Audio Specialist in California and  a "full service" best option (buying outright Estates or consigned selling for you), Audio Gear including whole Estate & Purchases.

We are a Factory direct Authorized dealer for Bowers & Wilkins, Synergistic Research, Aqua Acoustics, Bryston, REL, Project, EAR, and many of the finest products covering all needs and budgets

Please contact us if you have or know of an estate of audio gear that needs help selling and or helping you manage the purchasing or if you just have questions. We have a long history and are full service experts we will strive to make it easier for you. Give us a call and ask for David Weinhart and we can help you get the best possible outcome.

* * * We are always interested in purchasing quality Audio items, LP collections and quality trades are welcomed. * * *


 

Please call David Weinhart and to help you make the best sound possible and available weekdays from 11-4PM @ 310-472-8880 or on my cell text or call seven days a week including weekends from 10-7PM at 310-927-2260

Weinhart Design has lots of other items new and used and if you’re in Los Angeles or visiting please accept my invitation to experience our Audio Showroom by appointment and please visit our web site www.weinhartdesign.com

We are a top Bel Air based full service, Store  that offers, Sales, Design, Lighting & phone control, Repair, in home Service, Installation, Wi Fi,  and Automation, 

All sales out of California are State Sales Tax exempt. 

All sales in California State Sales we add California State Sales Tax 9.5% and it apply s applies for items picked up or shipped to a California address.

We accept payments by Bank Wire Transfers without fees on sales over $1,000 and is the only form of payment on all sales out of the U.S. and Canada. We prefer this method of payment on sales out of the USA & Canada and also makes shipping to addresses other than billing OK.

VISA, MC and Papal are gladly accepted within the U.S. and Canada as long as the charge is approved and were shipping to the BILLING ADDRESS and shipping to the billing address on record and adds a 3% fee to cover costs. We also accept AMEX & Discovery cards at the cost of 4%.

We accept Bank Checks without fees and do have some other no fee options (best to call David Weinhart the founder / owner for other no fee options and to consider any trades).

AMEX & Discover are also available for a 4% cost if shipped to the Billing Address and approved.

Please note: All credit card and PayPal transactions are subject to a 3% processing fee and to pay  either give us a PayPal address or call to charge VISA or MC (3% cost added) and / or we can provide other payment options best to call or Text David Weinhart in Los Angeles any time from 10am - 7pm at: 310-927-2260. Also we have some non fee options like Bank Checks and Bank Wire transfers.

Please call me directly in my world class showroom in Los Angeles weekdays:
from 11-4PM @ 310-472-8880 or on my cell including weekends from 10-7PM at 310-927-2260 and I can answer your questions and help you with all of your design, new and preowned needs.

Making better Sound

One system at at a time,

David Weinhart
Weinhart Design, Inc.
President & CEO 
The Audio and Video Expert 
e: [email protected]
www.weinhartdesign.com
2337 Roscomare Road, Studio #1
Los Angeles, California 90077

Showroom: 310-472-8880
Cell: 310-927-2260 PST seven days text or call from 10am - 7pm