Mark LevinsonNo 32 Mark Levinson No 32  Reference Preamplifier and ControllerI work for an estate sale, we are selling many different high end home theater audio equipment selling the stereo preamplifier and the controller. Admittedly this photo is a bit blurry. I can de...9000.00

Mark Levinson No 32 Reference Preamplifier and Controller [Expired]


no longer for sale

Amended on

I work for an estate sale, we are selling many different high end home theater audio equipment selling the stereo preamplifier and the controller. Admittedly this photo is a bit blurry. I can definitely send photos to an interested party.
Preamp Serial #1145 controller #1117
Have Remote Control
Have Manual
Specs: Description: Line-level preamplifier Inputs: 3 pairs balanced (XLR), 5 pairs single-ended (RCA, optional), 2 Controller/DC cable connectors, ground terminal. Outputs: 2 pairs balanced (XLR), 2 pairs single-ended (RCA), 1 pair record-out (XLR), 2 pairs record-out (RCA). Controller connectors: IEC AC mains receptacle, ground terminal, 2 Controller/DC cable connectors, three 3.5mm mini-jacks (for IR input, trigger out, trigger in), 3 Mark Levinson Link communications connectors, 6-pin RJ-11 RS-232 port, two 8-pin RJ-45 control ports (PHASTLink;r-compatible). Maximum voltage gain: 0, 6, 12, or 18dB (line stage); Volume control range: 80.0dB. Gain resolution: 0.1dB steps above 23.0 on display (-57dB), 1.0dB steps below 23.0 on display (-57dB). Input overload: 2V on XLR, 1V on RCA (gain set to +18dB); 4V on XLR, 2V on RCA (gain set to +12dB); 8V on XLR, 4V on RCA (gain set to +6dB); 16V on XLR, 8V on RCA (gain set to 0dB). Frequency response: 10Hz-40kHz, ±0.1dB. Input impedance: 100k ohms. Output impedance: less than 10 ohms on XLR, less than 20 ohms on RCA. Maximum output (main outputs): 16V on XLR, 8V on RCA. THD+noise: less than 0.001%. Crosstalk: better than -120dB, any input to any output, input unterminated; better than -140dB, input terminated. Residual noise: 20Hz-20kHz; better than -120dBV, input terminated. Mains voltage: 100V, 120V, 220V, 230V, or 240VAC at 50 or 60Hz (factory-set). Dimensions: Controller: 19.5" W by 3" H by 13" D. Preamplifier: 19.5" W by 3.2" H by 11.4" D. Shipping weights: Controller, 60 lbs; preamplifier, 46 lbs.

I work for an estate sale, we are selling many different high end home theater audio equipment selling the stereo preamplifier and the controller. Admittedly this photo is a bit blurry. I can definitely send photos to an interested party. Preamp Serial #1145 controller #1117 Have Remote Control Have Manual Specs: Description: Line-level preamplifier with optional phono stage. Inputs: 3 pairs balanced (XLR), 5 pairs single-ended (RCA, optional), 2 pairs phono (XLR or RCA), 2 Controller/DC cable connectors, ground terminal. Outputs: 2 pairs balanced (XLR), 2 pairs single-ended (RCA), 1 pair record-out (XLR), 2 pairs record-out (RCA). Controller connectors: IEC AC mains receptacle, ground terminal, 2 Controller/DC cable connectors, three 3.5mm mini-jacks (for IR input, trigger out, trigger in), 3 Mark Levinson Link communications connectors, 6-pin RJ-11 RS-232 port, two 8-pin RJ-45 control ports (PHASTLink;r-compatible). Maximum voltage gain: 0, 6, 12, or 18dB (line stage); 40, 60dB (optional phono stage). Volume control range: 80.0dB. Gain resolution: 0.1dB steps above 23.0 on display (-57dB), 1.0dB steps below 23.0 on display (-57dB). Input overload: 2V on XLR, 1V on RCA (gain set to +18dB); 4V on XLR, 2V on RCA (gain set to +12dB); 8V on XLR, 4V on RCA (gain set to +6dB); 16V on XLR, 8V on RCA (gain set to 0dB). Frequency response: 10Hz-40kHz, ±0.1dB. Input impedance: 100k ohms. Output impedance: less than 10 ohms on XLR, less than 20 ohms on RCA. Maximum output (main outputs): 16V on XLR, 8V on RCA. THD+noise: less than 0.001%. Crosstalk: better than -120dB, any input to any output, input unterminated; better than -140dB, input terminated. Residual noise: 20Hz-20kHz; better than -120dBV, input terminated. Mains voltage: 100V, 120V, 220V, 230V, or 240VAC at 50 or 60Hz (factory-set). Dimensions: Controller: 19.5" W by 3" H by 13" D. Preamplifier: 19.5" W by 3.2" H by 11.4" D. Shipping weights: Controller, 60 lbs; preamplifier, 46 lbs.
Seller Information

andyshankman 

Last 12 months
All-time00.0%

Member since March 2012

Items from this seller