Mark-Levinson No. #40 Media Processor Video And Audio Processors

Electronic Item: Mark-Levinson No. 40 Media Console Video Processor And Audio Processor
Price When New: $30,000
Price On Audiogon: $10,000

This is a fantastic piece of electronics equipment. This is a Mark-Levinson No. 40 Media Console that is in fantastic working condition with the exception of some minor cosmetic scratches on the outside of the case.

Specifications

Audio Processor Specifications
Analog Inputs (standard
configuration)
6 S/PDIF electrical on RCA
1 S/PDIF electrical on BNC
2 AES/EBU electrical on XLR
4 EIAJ optical
6 single-ended multichannel analog on RCA (optional)
Digital Inputs (standard
configuration)
1 balanced stereo pair on XLR
6 single-ended stereo pairs on RCA
Outputs 8 balanced on XLR
8 single-ended on RCA
2 remote zone audio (each include 2 stereo RCA single ended pairs)
1 Nº40 comm and aux comm on RJ-11
Frequency Response 20Hz – 40kHz, +0.5dB, –1.1dB
THD + N < 0.005%
Noise < -98dB below output, 20Hz-20kHz
Crosstalk: < -100dB
Analog to Digital
Converter Type
24/96kHz multibit ΣΔ
Digital to Analog
Converter Type
Balanced 24/192kHz multibit ΣΔ
Maximum Output (XLR) 12V rms
Maximum Output (RCA) 6V rms
Dynamic Range > 98dB
Analog Filter Bessel-tuned, linear phase to 40kHz
Low-level Linearity Deviation less than 1dB to -100dB FS (1kHz, 20 bit data, 80kHz
measurement bandwidth)
Volume Range 80dB user/100dB system
Volume Resolution 0.1dB steps above 20.0 in display
1.0dB steps between Off and 20.0 in display
Maximum Input Level 6V on RCA
12V on XLR
Digital Input Impedance 75Ω (S/PDIF electrical)
110Ω (AES/EBU electrical)
Analog Output Impedance <20Ω
Power Consumption Approximately 70W
Operating Environment 0°C to 35°C
Operating Voltage 100V, 120V, 200V, 230V, 240V, factory set for destination country
only
Operating Frequency 50 or 60Hz, factory set for destination country
Overall Dimensions See Dimensions
Shipping Weight 50lbs. (22.7kg)

Video Processor Specifications
Input Complement
(standard
configuration)
3 composite on RCA
6 S-video on Y/C inputs
3 component on three 75Ω BNC
Main Video Outputs 1 component on four 75Ω BNC
1 S-video on Y/C
1 composite on RCA
Remote Zone
Connectors
2 remote zone video (each include 1 S-video and 1 composite RCA
output, IR input)
Monitor Video
Outputs (standard
configuration)
1 composite on RCA monitor
Additional Connectors 1 Nº40 comm on RJ-11 connector
2 PHASTlink control ports on RJ-45 connectors
2 RS-232 ports on RJ-11 connectors
3 programmable DC triggers on 3.5mm outputs
1 Main Street Communications Card (optional) includes amp
comm on RJ connectors
Video input
impedance
75Ω
Video output
impedance
75Ω
Video bandwidth > 70MHz pass-through
Video signal to noise
ratio
>50dB through decoder
> 60dB pass-through
Comb filter Four line adaptive
Differential phase
(pass-through)
<0.2°
Differential phase
(through decoder)
<1°
Differential gain (passthrough)
<0.3%
Differential gain (through
decoder)
<3%
Available trigger current 120mA @ 5V per outlet
60mA @ 12V per outlet
Power Consumption Approximately 70W
Operating Environment 0°C to 35°C
Operating Voltage 100V, 120V, 200V, 230V, 240V, factory set for destination country
Operating Frequency 50 or 60Hz, factory set for destination country only
Overall Dimensions See Dimensions on pages A-6 and A-7.
Shipping Weight 50lbs. (22.7kg)

If you have any questions, do not hesitate to ask.
Please note that payment by Paypal or credit card will require an additional 3% fee. Also note that shipping information is per box.