CrestronAmp-2210ht Crestron Amp-2210ht  Commercial Power Amplifiers 2x210W 4/8 ohm/ 70VI have 6 of these available. Please email me after the auction if you are interested in buying multiple itemsSpecs:Crestron AMP-series Commercial Power Amplifiers provide a perfect combination of h...199.00

Crestron Amp-2210ht Commercial Power Amplifiers 2x210W 4/8 ohm/ 70V [Expired]


no longer for sale

I have 6 of these available. Please email me after the auction if you are interested in buying multiple items

Specs:

Crestron AMP-series Commercial Power Amplifiers provide a perfect combination of high output and efficiency for all types of professional audio applications. 100% Crestron engineered and built, these amplifiers are ENERGY STAR qualified to enable organizations to fulfill their green initiatives without compromising on audio performance. Advanced design features include a high-efficiency amp topology with active power factor corrected power supply, delivering a generous amount of power in a space-saving 1U rack-mountable chassis.

Audio

  • Typical of 2 mono amplifier channels:
  • Input Signal Type Balanced or unbalanced analog line-level
  • Output Signal Types 4/8 Ohm or 70 Volt
  • Output Power 120 Watts at 8 Ohms;
  • 210 Watts at 4 Ohms;
  • 420 Watts at 8 Ohms bridged;
  • 210 Watts at 70 Volts[1]
  • Damping Factor >100
  • Protection Over Current, Over/Under Voltage, Over Temperature, DC Offset
  • Frequency Response 20Hz to 20kHz 0.5 dB at 4/8 Ohms;
  • 80Hz to 20kHz +0/-3 dB at 70 Volts
  • THD 0.05% @ 1kHz, full rated power at 4/8 Ohms, 8 Ohms Bridged, or 70/100 Volts;
  • 0.1% @ 20Hz to 20kHz, 120W at 8 Ohms;
  • 0.2% @ 20Hz to 20kHz, 210W at 4 Ohms;
  • 0.1% @ 20Hz to 20kHz, 420W at 8 Ohms Bridged;
  • 0.1% @ 80Hz to 20kHz, 210W at 70 Volts
  • S/N Ratio >103 dB, A-weighted
  • Crosstalk >70 dB @ 1kHz
  • Gain 23 dB with INPUT LEVEL control set at 12 o'clock nominal position
  • Input Sensitivity 2.22 Vrms for rated output power with INPUT LEVEL control set at 12 o'clock nominal position
  • Input Detection Threshold 40 mV RMS @ 1 kHz
  • Input Level Adjustment 10 dB from nominal

Connectors

  • G 6-32 screw, chassis ground lug
  • INPUT CH 1 – 2 (2) 3-pin 3.5mm detachable terminal blocks;
  • Balanced/unbalanced line-level audio inputs;
  • Input Level: 5.3 Vrms maximum with INPUT LEVEL control set at minimum position;
  • Input Impedance: 24k Ohms balanced, 12k Ohms unbalanced
  • SPEAKER OUTPUT CH 1 – 2 (2) 4-pin 7.62mm 15A detachable terminal blocks;
  • 4/8 and 70V power amplifier outputs;
  • Wire Size: Terminals accept up to 14 AWG
  • REMOTE (1) 6-pin 3.5mm detachable terminal block;
  • Provides (2) remote control inputs; enables independent power control of each channel via local jumpers or remote contact closures;
  • inputs may be safely paralleled for global control
  • FUSE T6.3AH 250V Main fuse holder;
  • 5x20 mm, 250V, 6.3AH, time-lag, high-rupture rated
  • 100-240V~50/60Hz (1) IEC C14 male chassis plugs, main power input;
  • Mates with removable power cord (included)

Controls & Indicators

  • PWR (1) dual-color LED, green indicates ACTIVE state, yellow indicates STANDBY state
  • INPUT 1 – 2, SIGNAL (2) green LEDs, indicate signal presence on each corresponding channel
  • OUTPUT 1 – 2, CLIP (2) amber LEDs, indicate a clipping condition on each corresponding channel
  • OUTPUT 1 – 2, FAULT (2) red LEDs; indicate over-temperature, over-current, over or under power supply voltage, or DC offset condition on each corresponding channel
  • INPUT CH 1 – 2 LEVEL (rear) (2) Rotary input boost/attenuate adjustments w/center detent at nominal
  • SPEAKER OUTPUT CH 1 – 2, 70V / 4/8 (rear) (2) 2-position slide switches, select the output configuration for each corresponding channel
  • ON/REMOTE/OFF (rear) (1) 3-position slide switch; selects between all channels powered on, all channels powered off, or remote control of each individual channel

Power Requirements

  • Main Power 100-240 Volts AC, 50/60 Hz
  • Power Consumption 62 Watts @ 8 Ohms, all channels driven at 1/8th output power;
  • 88 Watts @ 4 Ohms, all channels driven at 1/8th output power;
  • 89 Watts @ 70V, all channels driven at 1/8th output power;
  • 26 Watts, all channels idle;
  • <1 Watt in standby

Environmental

  • Temperature 41° to 104°F (5° to 40°C)
  • Humidity 10% to 90% RH (non-condensing)
  • Heat Dissipation 110 BTU/Hr @ 8 Ohms, all channels driven at 1/8th output power;
  • 121 BTU/Hr @ 4 Ohms, all channels driven at 1/8th output power;
  • 125 BTU/Hr @ 70V, all channels driven at 1/8th output power;
  • 89 BTU/Hr, all channels idle;
  • <3.4 BTU/Hr in standby

Enclosure

  • Chassis Metal with black finish, vented top and sides, convection cooled
  • Front Panel Metal, black finish with polycarbonate label overlay
  • Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)

Dimensions

  • Height 1.70 in (44 mm)
  • Width 17.28 in (439 mm);
  • 19.0 in (483 mm) with rack ears
  • Depth 14.59 in (371 mm)

Weight

  • 15.6 lb (7.1 kg)

martlingj member since January 2016

 
Last 12 months
All-time00.0%
Items from this seller