Emotiva XPA-5 Gen2

This generation 2 unit is in great working condition with an
Emotiva warranty in effect until 7/18/18. 
Shipping cost is by the buyer. 
Please note the units dimensional and weight data shown below.

 

Number of Channels:
5

 

Power Output (rated
power; THD < .1%):

200 watts per channel;
all channels driven;
into 8 Ohms. 300 watts per channel;
all channels driven;
into 4 Ohms.

Rated Power Bandwidth (at rated power; 8 Ohm load):

20 Hz to 20 kHz + / - 0.075 dB.

 

Minimum Recommended Load Impedance:

4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.

Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1.5 dB).

 

THD
+ noise: < 0.016%.

Signal to Noise Ratio
(8 Ohm load):

> 95 dB at 1 watt (A-weighted).

> 119 dB at rated power (A-weighted).

 

Damping Factor
(8 Ohm load):  > 500.

Speaker
Output Connections:  Audiophile grade, gold plated, 5-way binding posts.

 

Power Supply:

60,000 uF of storage capacitance.

1200 VA
heavy duty toroidal transformer

 

Input Sensitivity (for rated power; 8 Ohm load):
1.8 V.

 

Gain: 29 dB.

Input Connections:

Unbalanced (RCA);
balanced (XLR); one each per channel, independently selectable.

Input Impedance:

33 kohms (balanced).

23.5 kohms (unbalanced).

 

Trigger:

Trigger Input: 5 - 20 V (AC or DC); <10 mA input current
required. Trigger Output:
12 VDC; can drive any load up to 100 mA.

 

Power
Requirements:

115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).

 

Front
Panel Controls
and Indicators:

Standby; push button
(halo ring changes
color to indicate
Standby or On). Status LEDs;
one per channel;
blue.

Status LEDs change to red to indicate a fault condition.

 

Rear Panel Controls:

AC Power switch; rocker switch (switches AC
main power).

Status LEDs switch; disables
front panel Status
LEDs and dims Standby button
halo. Input selector
switches (one per channel); metal
toggle switches; select
between balanced and unbalanced inputs.

Protection:

The XPA-5 is protected against
excessive operating temperature, shorted speaker connections,

ground faults,
and other common
fault conditions.

 

Dimensions:

17” wide x 7.75” high
x 19” deep; unboxed (includes feet and binding
posts). 23-1/2” wide
x 12” high x 24-3/4”
deep (boxed).

Weight:

70.4 pounds unboxed (81.5 pounds boxed).