KrellTheater 7 AmpKrell Theater 7 Amp SAVE Big $$$$ TODAY!I'll make this easy for everyone (Not accepting offers below $4750)SERIOUS AUDIOPHILE BUYERS READY to PURCHASE EMAIL me RIGHT NOW!EVERY model on SALE - email for installed/delivered quotes!profes...7500.00

Sorry, this listing has ended.

You may like one of these similar items:

Krell Theater 7 Amp SAVE Big $$$$ TODAY! [Expired]

no longer for sale

 I'll make this easy for everyone (Not accepting offers below $4750)


EVERY model on SALE - email for installed/delivered quotes!

professional installation available some areas (email to confirm if you’re in our install network)

PayPal add 3% - Installation is additional fee email for quote & range of options available
7 Channel Power Amplifier

100 Watt Amplifier Featuring Krell iBias Technology

The Theater 7 Amp uses iBias technology to maintain Class A operation up to 100 watts into 8 ohms for the left, right, and center channels and up to 50 watts for the four surround channels. This provides the critical front channels with high bias current to produce that lush, open Class A sound while also minimizing the heat output and power consumption of the whole amplifier.

The amplifier design uses Krell Current Mode technology that is fully differential and discrete in the critical gain stages. This results in a highly linear and extended frequency response, well beyond the range of hearing, for smooth effortless highs and tight high impact bass.

The power supply consists of two 700VA toroidal transformers and 160,000uF of capacitance. This is shared among all the channels so all of that power is available to the channels with the most demand.

In real world conditions the left, right, and center channels require the lion’s share of the power so this gives the Theater 7 a more effective power supply than other amplifiers that have smaller dedicated power supplies for each channel.

Frequency response
20 Hz to 20 kHz +0, –0.11 dB
< 3 Hz to 200 kHz +0, –3 dB

Signal-to-noise ratio
> 101 dB, wideband, unweighted, referred to full power output
> 114 dB, “A”-weighted

25.5 dB

Total harmonic distortion
< 0.02% at 1 kHz, at 100 W, 8 Ω, two channels driven;
< 0.20% at 20 kHz, at 100 W, 8 Ω, two channels driven;

Input impedance
Single-ended: 27 kΩ;
Balanced: 54 kΩ;

Input sensitivity
Single-ended or balanced: 1.50 V RMS

Output power, per channel
120W RMS at 8 Ω, 2 channels driven
115W RMS at 8 Ω, 3 channels driven
110W RMS at 8 Ω, 5 channels driven
105W RMS at 8 Ω, 7 channels driven
210W RMS at 4 Ω, 2 channels driven
190W RMS at 4 Ω, 3 channels driven
165W RMS at 4 Ω, 5 channels driven
140W RMS at 4 Ω, 7 channels driven

Output voltage
93 V peak-to-peak
33 V RMS

Output current
10 A peak

Output impedance
< 0.025 Ω, 20 Hz to 20 kHz

Damping factor
> 320, 20 Hz to 20 kHz, referred to 8 Ω

Power consumption
Standby: 1 W
Idle: 66 W
Maximum: 2000 W

Heat output
Standby: 3.42 BTU/hr.
Idle: 225 BTU/hr.
Maximum: 2200 BTU/hr.

7 single-ended via RCA connector
7 balanced via XLR connector

7 pairs five-way binding posts

Remote connectors
One 12 VDC input (12 V trigger) via 3.5 mm jack

17.1 in. W x 7.65 in. H x 21.10 in. D
434 mm W x 194 mm H x 536 mm D

80 lbs., 36.4 kg (shipping)
70 lbs., 31.8 kg (unit only)

Seller Information

htd1  Verified Dealer

Last 12 months

Member since May 2011