Theta DigitalDreadnaught IIusedTheta Digital Dreadnaught II 5 channel AmplifierUp for sale is a Theta Digital Dreadnaught II, 5 channel amplifier. it is absolutely mint- no dings, scratches, dents, never exposed to smoke. It was put on an enclosed rack and left alone in a t...2300.00

Theta Digital Dreadnaught II 5 channel Amplifier

Listing ID: lis82ji0 Classified 
 Listed  · 298 Views

4 Watchers

Items from this seller

Time Left: Listing Sold

This listing has ended.

Condition
9/10
Payment methods

Contact seller after sale to pay viaVISA/Mastercard

Ships fromWheaton, IL, 60189
Ships toUnited States
Package dimensions29.0" × 24.0" × 14.0" (100.0 lbs.)
Shipping carrierFedEx
Shipping costFree
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Up for sale is a Theta Digital Dreadnaught II, 5 channel amplifier.  it is absolutely mint- no dings, scratches, dents, never exposed to smoke.  It was put on an enclosed rack and
left alone in a temperature controlled room since first purchased.  It includes a remote, owners manuel, power cord and original box.  Guaranteed to work perfectly or I'll refund your $.     

If you are not already aware of Theta Digital amplifier's reputation, read the many professional reviews on line.  This amplifier sounds dynamic,
rich, detailed and lively and can be listened to for hours without any fatigue.  

Below
is the manufacturer specifications: 

Analog Audio Inputs 1 Single-ended (RCA)
per channel on each module. 1 Balanced (XLR) per channel on each module. Input
Impedance 47 kOhms. Single-Ended or Balanced, each phase. Input sensitivity
Mono or Stereo module: Single-ended) 1.825V RMS input for 225W into 8 ohms.
Balanced) 1.825V RMS input for 225W into 8 ohms. Mono Bridged module
Single-ended or Balanced) 1.825V RMS input for 500W into 8 ohms Gain
(Single-Ended or Balanced) 27.8dB. Polarity (Single-ended) Non-Inverting.
(Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output. Analog
Audio Outputs One balanced output with 5-way binding posts per channel.
Modes/Processes Standby: Amplifier is ready to be turned on via front panel
switch or remote trigger. Overcurrent, D.C., and/or thermal protection:
Amplifier will cycle. Catastrophic D.C. or output stage failure: Amplifier will
shut down. Power Output Mono or Stereo Module 8 ohms: 225W RMS per channel with
less than 0.05% THD from 20 Hz to 20 kHz: 4 ohms: 375W RMS per channel with
less than 0.05% THD from 20 Hz to 20 kHz. 2 ohms: 500W RMS per channel with
less than 0.05% THD from 20 Hz to 20 kHz. Mono Bridged Module 8 ohms: 500W RMS
per channel with less than 0.05% THD from 20 Hz to 20 kHz 4 ohms: 800W RMS per
channel with less than 0.05% THD from 20 Hz to 20 kHz. Frequency Response +0,
-.5 dB 0Hz to 20 kHz, load independent. Damping Factor Greater than 6000 at 100
Hz; Greater than 2000 at any frequency up to and including 20 kHz. Signal to
Noise Ratio 120dB referenced to rated output (A-Weighted) Crosstalk -85 dB
Miscellaneous Power Requirements 117V AC, 15A Slo BLo main fuse: 230V AC 8A Slo
Blo main fuse; 50/60 Hz Power Consumption Less than 1W at Standby; less than
80W at idle; 1500W maximum by 2 when fully loaded Trigger Input 5 to 12V DC;
Steady State. Dimensions (W x H x D) 17 5/8 inches x 7 15/16 inches x 19 3/4
inches; 448 mm x 202mm x 502 mm

 

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 14 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.