Musical Fidelity A5 Musical Fidelity A5 Integrated Amp
Listed · 500 Views
0 Watchers
Items from this seller
This listing has ended.
Listings Similar to Musical Fidelity
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Contact seller after sale to pay viaCertified check or Personal check | |
Ships from | Beach Park, IL, 60083 |
Ships to | United States |
Package dimensions | ?" × ?" × ?" (39.0 lbs.) |
Shipping carrier | unspecified |
Shipping cost | Specified after purchase |
Original accessories | Remote Control, Box, Manual |
Average | Research Pricing |
Amended on
This is an excellent sounding integrated amp. It has everything-power, sound, looks. At 250 watts per channel, it will drive any speaker with authority and clarity. I had them powering my Dynaudios Contour S3.4. The higher I turned the volume, the cleaner the speakers sounded. The performance of this amp will not disappoint you.
I managed to put a couple of nicks (as shown in pics) while removing it from the cabinet. This is why I rated it an 8 and not a 9.
This amp comes with Remote Control, Mains Lead, Instruction Manual, and Original Boxes & Packaging (double boxed).
Specifications
Output:
Voltage, RMS: 29 volts 20Hz to 20kHz
Voltage, Peak to Peak: 84 volts
Impedance: 50 Ohms
Frequency Response: 20Hz to 20kHz, +0dB
Line inputs:
Total harmonic distortion + noise, 20Hz to 20kHz: 100dB A Weighted
Input Sensitivity for 1 volt output: 240mV
Input Impedance: 220k Ohms
Gain at maximum volume: 12.5dB (4.2 times)
Overload Margin: 31dB
Channel Seperation: >70dB typical
Home Theatre Direct Input:
Input Sensitivity: Zero gain, not affected by volume control
Phono Input
Signal / noise ratio ref.1 volt RMS output: >94dB A weighted moving magnet
>88dB A weighted moving coil
Input sensitivity for 1 volt RMS output at 1kHz: 2.5mV moving magnet
>370uV moving coil
Input Impedance: 47k Ohms
Overload Margin: Moving magnet: 31.2dB
>370uV moving coil
Inputs:
4 pairs line level RCA connectors
1 pair (home theatre direct)
1 pair phono RCA connectors
Outputs:
1 pair RCA main output controlled by the volume
1 pair RCA tape record fixed line level output
Power requirement:
100/115/230 volts AC 50 / 60Hz (factory pre-set)
10 watts maximum
Weight:
13.5 kg, 29 lbs unit only
18kg, 39.5lbs in shipping carton
Dimensions:
440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
397mm, 15.6 inches deep including terminals
Buyer pays 3% PayPal
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.