Osborn Speakers F-2 detailed , amazing midrange

Osborn Speakers F-2

this is our demo pair --

they sound amazing and have a wonderful midrange

rated a 7/10 as there is some wear from deing our demo pr --see pictures

Please contact us direct for any questions or to buy contact us at [email protected] or call us at 215-953-9099

The cabinets of both the F1 and the F2 are constructed from 25 mm Customwood. This ensures that the output of the rear of the Bass Driver is much more isolated then in most speakers in this class, which use cheap 12 or 18 mm Chipboard. Any spurious cabinet vibrations will result in a loss of definition and sonic purity.

Several of the world's best speakers were used as references in the design of these speakers. We believe that the sound quality of these speakers is superior to all the references anywhere near their price and size. The drive units were chosen from the best available from around the world for unrivalled speed and accuracy.

The crossovers use superior components to other speakers. The capacitors are imported from France. They are specially designed and manufactured for use in high quality loudspeakers, most other speakers use cheap general purpose electrolytic capacitors. The inductors are wound in-house as none are available commercially which meet our criteria. Each crossover is hard wired with quality Datalink ultra-high speed, ultra-wide bandwidth cable, the same as that used in the world beating Osborn Monuments and Epitomes, and weighs about 1 Kg. in the F2, less in the F1 as it is a true 2 way.

The F2 uses the same dual voice coil mid/bass as used in the Titans, Titan Floorstanders and the Centre Speaker, and uses a 3 way crossover. This allows for an amazing bass response for the size of the cabinet. The F2 is a cost effective version of the Titan. The cabinets of the F1 and the F2 are finished in a very high quality black vinyl veneer. and the fronts are not rounded. This results in a considerable saving over the much more expensive timber veneer and rounded corners used in the rest of the range. The tweeter uses the same diaphragm as the Titan series speakers but a 0.6 Kg magnet is used instead of the 1.4 Kg magnet used in the Titans. Very high quality capacitors are used, but the Titan series uses the best capacitors available at considerably more expense.

These speakers are intended for use as either rear speakers in a very high quality Home Theatre application or as extremely high definition speakers in a mini or shelf mounted system where a large, powerful and detailed sound is required at a reasonable cost. The transparency and authority in a shelf mounted system is astonishing for speakers of this size. A quality timber or custom finish is optional on either model, this is to special order only.

There is also an F3 available. This is a cost effective version of the Titan Floorstander. The same drivers and crossover as the F2 are used in an identical sized cabinet to the Titan Floorstander. The same internal bracing and 32 mm Customwood are used, but the finish is the same as the F1 and F2.

Specifications:

SPEAKER DIMENSIONS 430 X 220 X 320 mm
WEIGHT 14 Kg.
EFFICIENCY 89 db for 1 watt at 1 meter.
DRIVER DIMENSIONS
Tweeter 30 mm Kevlar inverted dome with 0.6 Kg. magnet. Dome weight 0.275g.
Mid/Bass 179 mm Polyglass cone with cast aluminium frame 25.5 mm copper wound dual voice coil. Total moving mass 17.7g. Magnet weight 1.4 Kg. Resonant Freq. 38 Hz.
FREQUENCY RESPONSE 40 to 19000 Hz +/- 2 db. -10 db points 35 and 21000 Hz.
CROSSOVER POINTS 300 Hz and 3700 Hz @ 6 db/Octave.
MINIMUM IMPEDANCE 4 Ohm at 200 Hz.
MAX. REC. POWER 70 Watts R.M.S per Channel.
Rec. Ideal. 50 Watts per Channel.

click here for more info
Quest For Sound

Please contact us direct for ant questions or to buy contact us at [email protected] or call us at 215-953-9099

Good Listening
Stephen Monte

Quest For Sound
2307-R Bristol Pike
Bensalem , Pa.19020
215-953-9099
[email protected]
web site - www.questforsound.com