Outlaw Audio 950 Pre-Amplifier / Processor (Used)

For sale is a used Outlaw Audio Model 950 preamp/processor. It is in very good condition functionally and cosmetically. It has been the center of my home theater since 2005. It will be shipped in the original box with the original manual and remote.

Specifications
Audio Section
Analog
• Frequency response: 10 Hz - 90 kHz: +0, -3 dB (Bypass Mode)
• Signal to Noise Ratio: 102 dB (Bypass Mode)
• Distortion: 0.0038% (20 Hz ~ 20 kHz) (Bypass Mode)
• Input sensitivity / input impedance: 200 mV/ 47kohms
• Rated output: 1V(0dB gain in Bypass Mode)
Digital
• Signal to Noise Ratio: 102 dB
• Total Harmonic Distortion: <0.005% (1 kHz, at 0 dB)
• Dynamic Range: 100 dB
• D/A Output: Rated output 2 V (At 0 dB playback)
• Digital Input: S/P-DIF Format
• DSP Processor: Cirrus® CS 49326
• ADC: Cirrus CS 5360
• DAC: Cirrus CS 4396
Video Section
Composite
• Video Format: NTSC
• Input/Output Level: 1 volt P-P
• Input/Output Impedance: 75W
• Frequency Response: 5 Hz - 10 MHz -- +0, -3 dB
S-Video
• Signal Format: NTSC Y/C
• Luminance (Y) Input/Output Level: 1 volt P-P
• Chrominance © Input/Output Level: 0.3 volt P-P
• Input/Output Impedance: 75W
• Frequency Response: 5 Hz - 10 MHz -- +0, -3 dB
Component Video
• Signal Format: NTSC Y/Pr/Pb
• Analog Components
• Luminance (Y) Input/Output Level: 1 volt P-P
• Pr Input/Output Level: 0.7 volt P-P
• Pb Input/Output Level: 0.7 volt P-P
• Input/Output Impedance: 75W
• Frequency Response: DC - 45 MHz -- +0, -3 dB
Tuner Section
FM
• FM Tuning Range: 87.5 MHz - 108 MHz
AM
• Usable Sensitivity: Stereo: 1.8µV
• 50 dB Quieting Sensitivity: MONO 2.5µV STEREO 23 µV
• Signal to Noise Ratio (IHF-A): MONO 79 dB STEREO: 74dB
• Total Harmonic Distortion: MONO 0.2% STEREO: 50 dB
• AM Tuning Range: 520 kHz - 1710 kHz
• Usable Sensitivity: 25µV
General
• Power supply: AC 120 V, 60 Hz
• Power consumption: 45W
• Dimensions (including feet and connectors): 17.12 (W) x 4.6 (H) x 14.76 (D) inches, 435 (W) x 117 (H) x 375 (D) mm
• Weight: 17.6 Lbs/8 kg
• Trigger Outputs (x2): 12 VDC, 100 mA maximum

Please add 3% if you are paying via Paypal