McIntoshMX136 Home Theater ProcessorMcIntosh MX136 Home Theater Processor **Trade-in**FREQUENCY RESPONSE STEREO MODE LEFT and RIGHT FRONT Channels, +0, -0.5dB from 20Hz to 20kHz  DOLBY PRO LOGIC IIx MODE and MUSIC MODES LEFT, CENTER and RIGHT FRONT, LEFT and RIGHT SURROUND a...2895.00

McIntosh MX136 Home Theater Processor **Trade-in** [Expired]


no longer for sale

FREQUENCY RESPONSE STEREO MODE LEFT and RIGHT FRONT Channels, +0, -0.5dB from 20Hz to 20kHz 
DOLBY PRO LOGIC IIx MODE and MUSIC MODES LEFT, CENTER and RIGHT FRONT, LEFT and RIGHT SURROUND and BACK channels, +0, -0.5dB from 20Hz to 20kHz  If SMALL speakers are programmed, the above channels employ high pass filters with a corner frequency of 80Hz and a 12dB per octave roll-off. 
DD, DTS, and 8 CHANNEL EXTERNAL INPUT All channels, +0, -0.5dB from 20Hz to 20kHz 
SUBWOOFER Low pass filtered with an 80Hz corner frequency and 24dB per octave roll-off in all Modes except External.
RATED OUTPUT 2V from all Outputs 
OUTPUT IMPEDANCE Less than 600 ohms all Outputs 
MAXIMUM OUTPUT 8V from all Outputs 
TOTAL HARMONIC DISTORTION All channels, 0.005% from 20Hz to 20kHz 
INPUT SENSITIVITY Line Level: 100mV for 500mV output Phono: 1mV for 500mV output Dolby Level: 200mV External Processor Reference Level: 200mV 
SIGNAL-TO-NOISE RATIO, A-WEIGHTED 98dB below rated output 
MAXIMUM INPUT SIGNAL High Level: 6V 
INPUT IMPEDANCE: High Level: 20k ohms Phono: 47k ohms 
VOLTAGE GAIN High Level to Tape Output: 0dB High Level to Preamp Output: 14dB Phono to Preamp Output: 54dB 
TONE CONTROLS Bass and Treble variable 12dB boost to 12dB cut 
OVERALL DIMENSIONS (H x W x D) includes feet 9-7/16" (24cm) x 17-1/2" (44.5cm) x 18-3/4" (47.6cm) 
WEIGHT 31 lbs. (14.1Kg) net, 46 lbs. (20.9Kg) in shipping carton
Seller Information

iqexchange 
iqexchange  Verified Dealer

Last 12 months
All-time243100.0%

Member since August 2009