Rotel RSP 1066 Surround Processor I noted a couple scratches on the right side panel, otherwise perfect. This is why I rated it a very conservative 7/10. I have 480 100% feedback on that other site, 213 as a seller.
Operationally perfect as well. I ran this as 6.1. This processor will support 2 subwoofers out signals as well to your subwoofer amplifier. If you are interested in running just stereo with 2 subs, then this would be a preamp to consider.
I have never had an issue with this processor or the remote.
Manuals for both the RR 1050 remote and the RSP 1066 manual are included, as is an IEC cord for power.
This processor does not have HDMI. I programmed the remote and used it to control the TV Input.
The RR 1050 remote does support Macros if you are so inclined to programming them in.
The Rotel site has the manual under support/owner’s manuals/home theater if you want to read the entire specifications and what this processor will do.
For peace of mind, shipping will be via FedEx only.
Audio Total Harmonic Distortion <0.05%
Intermodulation Distortion (60 Hz:7 kHz) <0.05%
Frequency Response 10 Hz - 95 kHz, ±1 dB (line level) 10 Hz - 20 kHz, ±0.3 dB (digital level)
Signal to Noise Ratio (IHF A-weighted) 95 dB (Stereo) Analog 92 dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance Line Level: 200 mV/47 kohms
Tone Controls (Bass/Treble) ±8 dB at 100 Hz/10 kHz
Preamp Output Level 1.2 V (200 mV Input)
Video Frequency Response 3 Hz – 10 MHz, ± 3 dB
Signal to Noise Ratio 45 dB Input Impedance 75 ohms
Output Impedance 75 ohms
Output Level 1 volt
General Power Consumption: 40 watts
Power Requirements (AC) 115 volts, 60Hz (USA version) 230 volts, 50Hz (CE version)
Weight 7.6 Kg/16.7 lb.
Dimensions (W x H x D) 432 x 121 x 341 mm 17.01" x 4.76" x 13.43"
Front Panel Height (feet removed/for rack mount) 109 mm/4.29"
You will need to read the specifications & functions to be sure you understand the processor to make an informed decision to purchase.
Shown sitting on my bench just before packing for the photos.
Contact me with any questions