Includes: MP500 / MP500-CT / OTC1000 / CPCAlMAN-ADV / RAD-XD & Metal Case
MP500 MediaPro Digital Audio/Video Generator and HDMI Analyzer
The Sencore MP500 MediaPro is a multi-media format HDMI/DVI digital video/audio signal generator and HDMI analyzer in a portable instrument with a color touchpad screen.
The MP500 is a battery-powered generator that enables you to conduct on-site testing and calibration of video displays, and perform verification testing of your HDMI system and components such as A/V receivers, repeaters, etc.
HDMI 1.3 video and audio test generator to 165 MHz tests HDMI inputs on HDTVs, projectors, repeaters, A/V receivers, set-top-boxes, etc.
Multi-format to 1080p60 one pixel resolution
YCrCb - 8, 10, or 12 bit, 4:4:4 or 4:2:2 sampling
RGB - 8 bit, 4:4:4
Audio testing (8) channels with selectable frequency, level, sampling rates to 192 kHz, and bit depths to 24 bits.
Dolby and DTS multi-channel digital audio
DVI test generator to 165MHz - includes all computer and television formats
RGB Multi-format to 1080p60 or 1920x1080 one pixel resolution
Component YPrPb and RGB multi-format generator tests component inputs
Standard and exclusive video test patterns with simple touch pad variations in content, IRE level, or color
Moving Zone Plate pattern with horizontal and/or vertical movement to detect and evaluate video processing motion artifacts
Bitmap images may be stored to 100 MB of internal memory providing custom video patterns for special demonstration and testing applications
HDMI Output Application Tests troubleshoot interface challenges with EDID, HDCP, and CEC tests
An HDMI receiver/analyzer input provides video and audio format/timing information and a CEC test. The input includes an active EDID to test an HDMI source
S/PDIF coaxial and optical digital audio output for A/V receivers testing
User friendly on-board color touch screen interface designed to optimize workflow
Portable, with up to 4 hours of battery life, makes it ideal for lab bench, repair center, and field troubleshooting or calibration applications
The OTC1000 is an optical non-contact color analyzer for highly accurate and convenient measurement and calibration for all display systems, including projectors, rear projection, LCD, plasma and CRT displays.
The OTC1000 ColorPro requires a software interface, Sencore recommends the ColorPro by CalMANTM.
OTC1000 measurements closely match human eye response, using highly accurate tri-stimulus filtered sensors capable of measuring extreme low light conditions
It is fast! Takes continuous constant-rate (less than 1 second) measurement updates at light levels down to 0.01 fL
It is non-contact using a laser aiming tool for proper screen alignment. Setup is quick and straight-forward, and the user interface is very easy to use
Lensed, point and shoot color measurement system allows you to conveniently measure projectors and displays directly from the normal viewing position measuring exactly what the viewer is going to see