Cary Audio DesignCinema 7Cary Audio Design Cinema 7 "Balanced XLR" Home Theater AmplifierTRUE AUDIOPHILE CARY AUDIO CINEMA 7Beautiful sounding 7 channel amplifierHard to find "all black"Lightly used never pushed... 2 owner.Both owners were/are non smoking home..2nd & 6th blue led l...850.00

Cary Audio Design Cinema 7 "Balanced XLR" Home Theater Amplifier [Expired]


no longer for sale

TRUE AUDIOPHILE CARY AUDIO CINEMA 7
Beautiful sounding 7 channel amplifier

Hard to find "all black"
Lightly used never pushed... 2 owner.
Both owners were/are non smoking home..
2nd & 6th blue led lights are replaced and slightly dimmer. (see pic)
1 tiny scratch top middle on the corner (see pic)

*******************************************************************************

Cary Audio Designs Cinema 7 BLACK Home Theater Power Amplifier,
7 x 100 watts @ 8 ohms....(bench tested at 117.9 watts)..see below**
7 x 160 watts @ 4 ohms....(bench tested at 210.5 watts)..see below**

RAVE AWARD 2005 Best Amplifier under $3,000 from Home Theater magazine, 
XLR and RCA inputs.
"Silver front panel standard",
"Black face plate was optional"
Black epoxy coated steel chassis, black anodized aluminum face plate.

SPECIFICATIONS
caryaudio
Toroidal power transformer, 
Output Operation: Class A/B
Manufacturer Rated Power Output: 7 x 100 watts/channel @ 8 ohms. 7 x 160 watts/channel @ 4 ohms
Frequency Response: 5 Hz to 40kHz +/- 0 dB @ 1 watt. 5 Hz-100 kHz +0/-3 dB @ 1 watt
Signal to Noise: > 110dB, "A" Weighted
Input Sensitivity: 1.0 Volt
Input Impedance: 33 K ohms - RCA inputs
Voltage Gain: 28 db
Rear panel 12 volt trigger
AC Power Requirements: 117 or 234 VAC @ 50/60 Hz depending on market
Break-In Time: 100 hours of music playing time
Features: 50 MHz output transistors, Remote power on/off switch
Dimensions (H x W x D, inches):7" tall x 17 3/4" wide x 18"deep inches.
Weight (pounds): 66

Fully tested, all channels working perfectly .
Power cable included

**(HT LABS BENCH TEST RESULTS)
**This graph shows that the Cinema 7's left amplifier channel, with two channels driving 8-ohm loads, reaches 0.1% distortion at 117.9 watts and 1% distortion at 137.6 watts. Into 4 ohms, the amplifier reaches 0.1% distortion at 210.5 watts and 1% distortion at 234.8 watts. An input level of 103.6 millivolts was required to produce an output of 2.83 volts into an 8-ohm load, indicating an overall gain of 28.77 decibels.
THD+N from the amplifier was less than 0.031% at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was --107.26 dB left to right and --107.25 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was --114.20 dBrA.--MJP
Seller Information

chrish1881 

Last 12 months
All-time00.0%

Member since July 2015

Items from this seller