For sale is a gently used Devialet 400 Expert system arguably one of the most innovative, high performance end-game audio system on the market. Comes in original packaging and in excellent condition. Includes warranty.
See below for manufacturers info: The Dual Mono configuration offers performance that is four times greater. An augmented range of connections for the most extreme acoustic architectures.
PERFORMANCE LEVELS 2x400 Watts 6Ω THD + noise 0.00025% Signal-to-noise ratio: 133 dB Devialet AIR universal streamer (Wi-Fi and Ethernet) Asynchronous bi-directional USB (for vinyl digitisation) Optical inputs (TOS and TOS mini) Configurable coaxial connectors: Line or advanced phono stage (MM/MC) Digital inputs Mono pre-amplified analogue output (for subwoofer) Stereo pre-amplified analogue output (for audio headphones) Coaxial digital output (for digitizing vinyl) AES/EBU input X 2
May be chained together (up to 8 units) PACKAGING CONTENTS: 1 Devialet Expert - Le 400 One master unit One companion unit 1 Expert Remote (3 AAA LR03 1.5V batteries) 2 power cables – adapted to the country One Crystal Cable interdevice linking cable One mini jack cable User's manual for Devialet Expert – master unit User's manual for Devialet Expert – companion unit 2 warranty booklets (5 years) 2 microfiber cloths 2 pairs of gloves for handling CHASSIS CARVED OUT OF A SINGLE ALUMINIUM BLOCK: Black chrome finish Dimensions: 383mm x 383mm x 40mm (l, w, h) Weight: 5.9 kg (master) 5.4 kg (companion) Sliding removable connector cover Horizontal or vertical installation with automatic tilt detection ELECTRICAL POWER SUPPLY: Universal 80-265Vac – 50/60Hz Power cable provided adapted to the country Patented single stage switching mode topology High power level: 600W continuous, 3000W peak High output with power factor correction (PFC) High resiliency to hazards potentially encountered on distribution networks : brownouts, quick transients, overloads INPUTS / OUTPUTS: 2.4GHz 802.11 b/g/n Wi-Fi input for the Devialet AIR universal streamer Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM RJ45 10/100 Mbps Ethernet input for the Devialet AIR universal streamer Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM USB Audio 2.0 asynchronous input/output Formats supported: 16-bit/44.1 kHz PCM to 32-bit/192 kHz PCM DSD64 1bit/2.822400MHz and 1bit/3.072000MHz Special characteristics: Very low latency Bi-directionality for digitisation of the active source S/PDIF TOSLINK optical connector Also available on the companion unit Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM 3.5mm mini-jack S/PDIF optical + RS232 connector: Formats supported: 16-bit/44.1 kHz to 24-bit/96 kHz Device control via the bidirectional RS232 protocol up to 115200 bauds (documentation available via the configurator) RCA 1 & RCA 2 connector (selected via the configurator) Also available on the companion unit 1 or 2 coaxial S/PDIF digital inputs Formats supported: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM DSD64 1bit/2.822400MHz and 1bit/3.072000MHz 1 S/PDIF coaxial (RCA1) digital output Formats supported: PCM 24bits/48kHz/96kHz/192kHz Multi-room use and monitoring loop Pre-amplified analogue output Set or variable volume Output level up to 4 Vrms Stereo/mono/left/right mixing Available active filtering WM8740 D/A convertor operating at 24 bits/192 kHz Compatible with subwoofer, headphone amplifier, monitoring loop May be activated / deactivated via remote control RCA 3 & RCA 4 connectors (selected via the configurator) Also available on the companion unit Line-in stereo analogue input 24-bit/96 kHz or 24-bit/192 kHz sampling T.I. PCM4202 A/D convertor Accepts voltages up to +/- 10V Maximum recommended level: 4 Vrms Phono level stereo analogue input 24-bit/96 kHz or 24-bit/192 kHz sampling T.I. PCM4202 A/D convertor Accepts voltages up to +/- 100mV Maximum recommended level: 15mVrms Advanced conversion stage 1 or 2 coaxial S/PDIF digital inputs Formats supported : 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM DSD64 1bit/2.822400MHz and 1bit/3.072000MHz 3.5mm mini-jack trigger connector Speaker output : Patented ADH® (Analog Digital Hybrid) hybrid amplification core 4 mm banana plugs or fork connectors Maximum power of 2 x 400 Wrms under 6Ω Adjustable from 30 Wrms to 400 Wrms via the configurator Compatible with all speakers, from 10Ω to 16Ω Short-circuit protection Available active filtering THD+N (harmonic distortion) at full power: 0.00025% SMTPE IMD (intermodulation distortion): 0.001% SNR (signal-to-noise ratio): 130dB (unweighted) Thermal distortion: below measurement threshold Output impedance: 0.001Ω Passband: DC–87kHz (-3dB), DC–60kHz (-1dB), DC–30kHz (-0.1dB) PHONO STAGE Cells supported: MM/MC MM sensitivity of 1mVRMS at 15mVRMS MC sensitivity of 100 μVRMS at 5000 μVRMS 256 combinations for the resistive/capacitive charge of the cells Stereo/mono/left/right mixing 13 equalisation curves available Specific menu for dynamic adjustment of all these settings PREAMPLIFIER & MAIN DIGITAL/ANALOGUE CONVERTOR: Patented Magic Wire Digital / Analogue Converter, D/A T.I. PCM1792 Unique high-precision MasterClock with very low jitter: 2ps rms Conversion of all inputs into 24-bit/192 kHz Built-in DSD / PCM conversion SAM profile via configurator Available active filtering on all analogue outputs via configurator Volume control in increments of 0.5 dB Volume adjustment range: -97.5 dB to +30.0 dB Bypass/pass-thru mode available input by input Balance adjustment Tone control: bass +/-18 dB, treble +/-18 dB with variable frequency cut-off via configurator ON-BOARD INTELLIGENCE: SD card connector for software updates and configurations 3 SHARC DSPs (400 MHz) 1 x 16 MHz RISC processor 4 x 40 MHz RISC processors 1 x 64 MHz RISC processor OMNIDIRECTIONAL RADIO REMOTE CONTROL: Chassis carved out of a single aluminium block Black chrome finish Dimensions: 114 mm x 114 mm x 34 mm (l, w, h) Weight: ? Kg Requires 3 AAA batteries (1.5V LR03), provided – service life of a set of batteries: 2 years No peering required Ultra responsive, latency < 3ms