Original Owner. Includes: Power Cable and Original Double Boxes.
BUYER PAYS SHIPPING. PLEASE
NOTE THERE IS A 3% FEE FOR THE USE OF PAYPAL. WHEN PAYING VIA PAYPAL,
PLEASE WAIT FOR A GRAND TOTAL WITH SHIPPING BEFORE SENDING FUNDS. ALSO
NOTE THAT ANY OFFERS MADE, ARE PLUS SHIPPING and PayPal!
XPA-200 Stereo Amplifier
Fully discrete, dual differential, high current, short signal path Class A/B.
Number of Channels: 2
Power Output (rated power; THD < 1%):
150 watts / channel; into 8 Ohms; both channels driven. 240 watts / channel; into 4 Ohms; both channels driven.
Rated Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz + / - 0.045 dB.
Minimum Recommended Load Impedance:
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1 dB).
THD + noise: < 0.02%
Signal to Noise Ratio (8 Ohm load): > 89 dB at 1 watt (A-weighted). > 110 dB at rated power (A-weighted).
Damping Factor (8 Ohm load): > 500
Speaker Output Connections:
Full-sized, 5-way binding posts; one pair per channel (two channels).
Power Supply: 90,000 uF of storage capacitance. 360 VA heavy duty toroidal transformer
Input Sensitivity (for rated power; 8 Ohm load): 1100 mV.
Gain: 29 dB.
Input Connections: Unbalanced (RCA); balanced (XLR); one each per channel. Input Impedance: 47 kOhms.
Trigger: Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA.
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
Front Panel Controls and Indicators: Standby; push button (halo ring changes color to indicate Standby or On).
Status LEDs (four); blue LEDs illuminate for normal operation, red LEDs ashes during power-on or when a fault occurs; (may be disabled by rear panel Status LED switch).
Rear Panel Controls: AC Power switch; rocker switch (switches AC mains power).
Status LEDs switch; small slide switch on left (disables front panel Status LEDs and dims. Standby button halo lighting).
Input selector; toggle switch (selects between balanced and unbalanced inputs).
Protection: The XPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions: 17" wide x 3.875" high x 19" deep (includes feet and binding posts).
Weight: 31 pounds unboxed (37 pounds boxed).